• 간호행정학회지
• /
• 제11권4호
• /
• pp.449-467
• /
• 2005

Purpose: This study aims to offer the fundamental data in order to cost the nursing service on the basis of the NIC and a close examination of the interventions that are contained in the health insurance cost list under the system of the current health insurance. Methods: The data is handled with the SPSS 10.0 program. The participants' general peculiarity is calculated in terms of the real number and the percentage, and the performing frequency of the nursing interventions is calculated in terms of the mean and the standard deviation. the correlation between the participants' general peculiarity and the performing frequency of the nursing interventions is analysed with t-test or one way ANOVA of SPSS. Results: In the performing frequency of the nursing interventions, the domain of "the physiological: basic" was the highest as 2.69${\pm}$1.21, the domain of "the behavioral" was the lowest as 2.11${\pm}$1.12. There were 50 core interventions in the medical unit, 48 in the surgical unit, 24 in the MICU and 33 in the SICU. The health insurance cost items contained commonly in the core interventions of each unit were 12, and the health insurance cost items except 12 items contained commonly in the core interventions of each unit were appeared 14 items in the medical unit, 6 in the surgical unit, 7 in the MICU and 2 in the SICU. The core interventions contained commonly in four units of the medical unit, the surgical unit, the MICU & the SICU are 18. And among these, the core interventions contained in the health insurance cost items are 10; pain management, hyperglycemia management, analgegic administration, medication administration: intravenous, oxygen therapy, pressure ulcer prevention, fluid management, fluide monitoring, intravenous(IV) insertion, intravenous(IV) therapy. As the result of the comparison & analysis between the core interventions of the NIC and the health insurance cost items, the core interventions contained in the health insurance cost list are 21(29 as the health insurance cost items). Conclusion: In the performing frequency of the nursing interventions, the domain of "the physiological: basic" is being performed most frequently, and in the performing frequency of the core interventions, the interventions of the domain of "the physiological: complex" is being performed most frequently. On the basis of these results, the writer hopes that the attempts to interlink the nursing interventions into the nursing cost by using of standard terms and the efforts to cost the nursing services would also be made in the future constantly.

• 한국통신학회논문지
• /
• 제35권1A호
• /
• pp.71-79
• /
• 2010

다중채널 신호처리 알고리즘은 사용 주파수 대역의 가변성, 효율적인 전송전력 할당, 서로 다른 전송률과 대역을 요구하는 서비스 형태를 충족시키기 위한 가변 주파수 대역 변환을 요구한다. 본 논문에서는 다중채널 반송파 신호의 가변 주파수 대역 변환을 위해 시간 영역의 윈도우 함수와 DFT(Discrete Fourier Transform)를 이용한 다중채널 신호처리 알고리즘을 제안한다. 제안한 알고리즘은 기존의 주파수 영역에서 대역통과 신호처리를 하는 다중채널 신호처리 알고리즘과 달리, 시간 영역에서 윈도우 함수를 사용한 블록 신호처리를 하기 때문에 기존의 주파수 영역에서 신호처리 방식보다 연산이 간단하며 효율적인 주파수 변환을 할 수 있다. 전산모의 실험을 통해 제안한 알고리즘의 출력신호 복원과 가변 주파수 대역 변환이 효율적으로 이루어지는 것을 보였다.

• 한국통신학회논문지
• /
• 제33권7A호
• /
• pp.702-709
• /
• 2008

본 논문에서는 패킷기반의 OFDM 무선 통신 시스템에서 주파수 오프셋 예측 결과를 인접한 패킷들의 상관관계를 이용하여 오차를 최소화하는 알고리즘을 제안한다. 제안한 알고리즘은 이전 패킷에서 예측된 주파수 오프셋과 현재 패킷에서 예측한 주파수 오프셋의 신뢰도를 판단하고 가장 높은 신뢰도를 가진 예측치를 선택하여 최종 주파수 오프셋 예측치의 오차를 최소화하였다. 본 논문에서는 IEEE802.11a와 IEEE802.11p의 표준에서 제시한 프리앰블을 훈련심볼로 사용하였다. 실험결과를 통해 제안된 알고리즘은 주파수 오프셋 예측치의 신뢰도를 판단하기 위해 사용하는 비교 패킷의 수에 따라 주파수 오프셋 예측성능의 차이가 있으며, SNR이 비교적 낮은(2dB 이하) 환경일수록 주파수 오프셋 예측성능이 기존 예측 알고리즘보다 우수함을 확인하였다.

• 한방재활의학과학회지
• /
• 제24권1호
• /
• pp.83-92
• /
• 2014

Objectives To evaluate the clinical usefulness between muscle energy techniques (MET) and transcutaneous electrical nerve stimulator (TENS), we performed both on elector spinae muscle of acute low back pain patients. Methods After performing MET and TENS, we compared both in terms of electrical activity. We performed MET or TENS on elector spinae muscle of acute low back pain patients in each group (n=15,15). After performing MET or TENS, we analyzed root mean square (RMS), median edge frequency (MEF) and asymmetry index (AI). Results 1. After performing MET on elector spinae muscle of acute low back pain patients, RMS was significantly decreased compared with before (p<0.005). 2. After performing TENS on elector spinae muscle of acute low back pain patients, RMS was significantly decreased compared with before (p<0.005). 3. After performing MET on elector spinae muscle of acute low back pain patients, asymmetric index was significantly decreased compared with before (p<0.05). Conclusions According to above results, performing MET on elector spinae muscle of acute low back pain patients has effect in terms of RMS and asymmetric index. And performing TENS on elector spinae muscle of acute low back pain patients also has similar effect in terms of RMS but has not in terms of asymmetric index.

• 한국농촌건축학회논문집
• /
• 제4권1호
• /
• pp.61-70
• /
• 2002

The purpose of this paper is to find out and discuss architectural factors for planning the cultural facilities for performing art. For the purpose, the Culture & Art centers in major cities are investigated. The investigation focuses on the analysis of efficient utilization and spatial composition of the Culture & Art centers. Generally the cultural facilities must be located on the site where people can easily access, and should have various kinds and sizes of rooms which people can use for various activities. However, most of the investigated Culture & Art centers are apart from the downtown of the cities, and do not provide the varied spaces. In particular, the sizes of performing halls are too large, and this makes the ratio of room use frequency and the occupancy of seat to be low. To encourage people to use the Culture & Art Centers, the program managers should arrange various programs which reflect the needs of people, and the clients and designers should decide proper room sizes and functions through appropriate analyses of the facilities.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.76-81
• /
• 2012

Ultrasonic metal welding is one of the welding methods which welds metal by applying high frequency vibrational energy into specific area at constant pressure, avaliable in room temperature and low temperature. Ultrasonic metal welder is consisted of power supply, transducer, booster, and horn. Precise designing is required since each parts' shape, length and mass can affect driving frequency and vibration mode. This paper focused to horn design, its length L was set to 62mm by calculating vibration equation. By performing modal analysis with various shape variable b times integer, when length of b is 30mm the output was 39,599Hz at 10th mode. Also by performing harmonic response analysis, the frequency response result was 39,533Hz, which was similar to modal analysis result. In order to observe the designed horn's performance, about 4,000 voltage data was obtained from a light sensor and was analyzed by FFT analysis using Origin Tool. The result RMS amplitude was approximately 8.5${\mu}m$ at 40,000Hz, and maximum amplitude was 12.3${\mu}m$. Therefore, it was verified that the ultrasonic metal welding horn was optimally designed.

• 대한가정학회지
• /
• 제30권1호
• /
• pp.179-198
• /
• 1992

The purspoe of this study is to identify the socialization level of household work of the employed and unemployed housewives and it's related variables in order to provide some fundamental information for the rational and effective performation of the household task. For the purpose of this study, 700 questionnaire were distributed to the employed and unemployed wives who lived in Seoul. The data were analyed by the Frequency distribution, Percentile, t-test, F-test, Duncan's Multiple Range Test, and Multiple Regression Analysis. The main results were as follows : (1) Socialization level of household work of the employed wives was a little below medium point. When the household work was devided into three subdomains, in the domain of food and shelter, the socialization level was far below medium point. In the domain of clothes, the socialization level was a little higher than medium point. Socialization level of household work of the unemployed wives far below average. When the household work was devided into three sudbomains, in the domain of food, clothes and shelter, the socialization level was far below average, too. Socialization level of household work was significantly different according to the employment. (2) Among the background veriables, family income, household work helper, and frequency of leisure activities have a significant influence on the socialization level of the employed wives. Duration of marriage, housewife's education level and house income have a important effect on the socialization level of the unemployed wives background. (3) Among the background variabels of household work, performing competence of household work is powerful effect on the socialization level of the employed wives. And as for the unemployed wives, performing competence of household task and recognition of the velue of household work are significant variables. (4) The psychological variable such as sex-role attitude gave no noticeable influence on the socialization level of employed and unemployed wives. (5) In conclusion, classifing the variances influencing on the socialization level of household work in a measure of respcetive effect, it appears to be performing competence of household task, frequency of leisure activities, house income, sex-role attitued and educational level in the order of their influences for the employed wives. And as for the unemployed wives, it seems to be house income, educational level, performing competence of household work and frequency of leisure activities. To the two sides, the rate of explanation is shown at 35%.

• 한국항공우주학회지
• /
• 제45권10호
• /
• pp.872-880
• /
• 2017

일반적으로 추력기는 on/off 제어 방식을 이용한다. Bang-Bang Control, PWM(Pulse Width Modulator), PWPF(Pulse Width Pulse Frequency) 등이 그 방법으로 많이 이용되고 있다. PWPF를 설계할 때 파라미터($K_m$, ${\tau}$, $U_{on}$, $U_{off}$, $U_m$)를 잘못 선정하면 위상 지연, 연료 낭비, 수명 감소 등이 발생한다. 그러므로 파라미터가 시스템 성능에 미치는 영향을 분석하고 적절한 파라미터를 선정하여야 한다. 본 논문은 정적 해석을 수행하여 PWPF 파라미터 설계방안을 제시하였으며, 동적 분석 및 시뮬레이션을 수행하여 설계변수에 미치는 상호 영향을 분석하였다.

• 가정과삶의질연구
• /
• 제34권6호
• /
• pp.1-14
• /
• 2016

The purpose of this study is to examine the relation among adolescents' perception of parental overprotection, goal-seeking orientation, self-handicapping and academic procrastination. Questionnaires were administered to 1200 male and female high school students in Gyeonggi Province. A total of 942 questionnaires were statistically analyzed through mean, standard deviation, frequency analysis, one-way analysis of variance, Pearson's correlation analysis, and multiple regression analysis. The major results of the study are as follows: First, adolescents' academic procrastination differed by school grades. Second, for the high-performing group, self-handicapping, goal-seeking orientation and parental overprotection were significant predictors of their academic procrastination. For the mid-level performing group, self-handicapping and goal-seeking orientation were significant predictors of their academic procrastination. For the low-performing group, self-handicapping was the only predictor of their academic procrastination. Third, for the high-performing group, self-handicapping meditated the relation between parental overprotection and academic procrastination. Those results provide useful information regarding proactive support or intervention for adolescents' academic procrastination.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1113-1116
• /
• 1999

In this papers, we proposes a efficient compression method of an image using the extraction of boundary region of DCT in MPEG-1. DCT coefficients have from low frequency to high frequency various components. After performing DCT to an image, the data is compressed to contain the boundary Region by quantization, and the information of boundary Region can be extracted by inverse DCT. In those, I chose frequency components susceptible to the boundary through the many experiences. In this paper, boundary can be selected by dividing low frequency by big quantization coefficient and dividing high frequency by small quantization coefficient without degrading visual qualify in MPEG-1. Also it is predicted that to reduce high frequency value will be good in noisy environments.