• Journal of electromagnetic engineering and science
• /
• v.8 no.3
• /
• pp.114-118
• /
• 2008

Direct-conversion RF front-end for 5-GHz WLAN is implemented in $0.18-{\mu}m$ CMOS technology. The front-end consists of a low noise amplifier, and low flicker noise down-conversion mixers. For the mixer, an inductor is included to resonate out parasitic tail capacitances in the transconductance stage at the operating frequency, thereby improves the flicker noise performance of the mixer, and the overall noise performance of the front-end. The receiver RF front-end has 6.5 dB noise figure, - 13 dBm input IP3, and voltage conversion gain of 20 dB with the power consumption of 30 mW.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.904-907
• /
• 2002

In this study, the plasma-assisted $CO_2$ conversion characteristics were investigated in the streamer corona discharge and silent discharge reactors with dielectric of $Al_2O_3$, to improve the conversion efficiency $CO_2$. Some discharge characteristics of $CO_2$ as parameters of gap spacing and applied voltage frequency, in both corona and silent discharge reactor were also obtained. The maximum $CO_2$ conversion rate was 10.1 [%] under the 5.2 [W] of discharge power and 250 [Hz] of applied voltage frequency.

• MALSORI
• /
• no.45
• /
• pp.63-77
• /
• 2003

The purpose of voice color conversion is to change the speaker identity perceived from the speech signal. In this paper, we propose a new voice color conversion algorithm through the formant shifting and the spectrum-tilt modification in the frequency domain. The basic idea of this technique is to convert the positions of source formants into those of target speaker's formants through interpolation and decimation and to modify the spectrum-tilt by utilizing the information of both speakers' spectrum envelops. The LPC spectrum is adopted to evaluate the position of formant and the information of spectrum-tilt. Our algorithm enables us to convert the speaker identity rather successfully while maintaining good speech quality, since it modifies speech waveforms directly in the frequency domain.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.679-682
• /
• 2008

Probability precipitation is one of the most important factor for designing the hydrology structures. Probability precipitation is calculated based on the frequency analysis on each durations of annual maximum rainfall data. For frequency analysis we need a conversion factor between the rain data per random-time interval and fixed-time-interval. In this study, the minutely precipitation data on observatory of the Meteorological Administration are used for 37 stations. Therefore, we should conversion factors between the rain data per minute and fixed-time-interval.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1106-1111
• /
• 2018

Electromagnetic waves potentially have been used to heat overdense nuclear fusion plasmas through a double mode conversion from ordinary to slow extraordinary and finally to Electron Bernstein Wave (EBW) modes, OSXB. This scheme is efficient and has not any plasma density limit of electron cyclotron resonance heating due to cut-off layer. The efficiency of conversion depends on the isotropic launching angles of the microwaves with the plasma parameters. In this article, a two-step mode conversions of OSXB power transmission efficiency affected by the fast extraordinary (FX) loses at upper hybrid frequency are studied. In addition, the kinetic (hot) dispersion relation of a overdense plasma in a full wave analysis of a OSXB in Wendelstein 7X (W7-X) stellarator plasma has been numerically simulated. The influence of plasma dependent parameters such as finite Larmor radius, electron thermal velocity and electron cyclotron frequency are represented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.638-646
• /
• 2005

In recent wireless communications, direct conversion transceiver or If sampling SDR-based receivers have being designed as an alternative to conventional transceiver topologies. In direct conversion receiver a.chitectu.e, the 1.equency/phase offset between the RF input signal and the local oscillator signal is a major impairment factor even though the conventional AFC/APC compensates the service deterioration due to the offset. To rover the limited tracking range of the conventional method and effectively aid compensation scheme in terms of I/Q channel imbalances, the frequency/phase offset compensation in RF-front end signal stage is proposed in this paper. In RF-front end, the varying phase offset besides the fixed large frequency/phase offset are corrected by using early-late phase compensator. A more simple frequency and phase tacking function in digital signal processing stage of direct conversion receiver is effectively available by an ingenious frequency/phase offset tracking method in RF front-end stage.

• 전기의세계
• /
• v.19 no.4
• /
• pp.1-11
• /
• 1970

It is well known that solid-state devices like inverter and converter made by transistor and other semi-conductors are widely used for the purpose of motor speed control in industrial fields. This paper is devoted primarily to a study of Trial Manufacturing of Solid-state Frequency Converter by means of single-phase bridge-type SCR inverter. The principle of the trial product belongs to AC-DC-AC conversion system. The voltage to be impressed to the motor in case of speed control by frequency conversion method is necessary to be proportional to frequency. It also requires the frequency and voltage are independent to hte load variation. In order to meet above requests required to motor speed control., the trial product introduced the open loop system in the frequency setting and closed loop system in the voltage setting. The trial product showed the favorable performance characteristics in speed control of singlephase fractional horsepower motor from 45HZ through 80HZ.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.12 no.2
• /
• pp.101-107
• /
• 2012

This study describes a proposed method of converting an input sound signal into a color image by emulating human synesthetic skills which make it possible to associate an sound source with a specific color image. As a first step of sound-to-image conversion, features such as fundamental frequency(F0) and energy are extracted from an input sound source. Then, a musical scale and an octave can be calculated from F0 signals, so that scale, energy and octave can be converted into three elements of HSI model such hue, saturation and intensity, respectively. Finally, a color image with the BMP file format is created as an output of the process of the HSI-to-RGB conversion. We built a basic system on the basis of the proposed method using a standard C-programming. The simulation results revealed that output color images with the BMP file format created from input sound sources have diverse hues corresponding to the change of the F0 signals, where the hue elements have different intensities depending on octaves with the minimum frequency of 20Hz. Furthermore, output images also have various levels of chroma(or saturation) which is directly converted from the energy.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.413-414
• /
• 2014

This paper proposed an optimized design of a dual active bridge converter for a low-voltage charger. The dual active bridge converter among various bi-directional DC/DC converters is a high-efficiency isolated bi-directional converter. In the general design, when the battery voltage is high, the ZVS region is reduced. In contrast, when the battery voltage is low, the efficiency is low due to high conduction loss. In order to increase the ZVS region and the power conversion efficiency, depending on the battery voltage, variable switching frequency method is applied. At the same duty, the same power is obtained regardless of the battery voltage using the variable switching frequency method. The proposed method was applied to a 5kW prototype converter, and the experimental results were analyzed and verified.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.387-390
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit Incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.