• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.11-18
• /
• 2015

Purpose - This paper reviews the changes in the ship export and import structure between Korea and China. It utilizes the comparative advantage trade theory to analyze time-series statistical data from the market share index, revealed comparative advantage index (RCA), and trade specialization index(TSI). Research design, data, and methodology - Based on their economic phases, both Korea and China have similar country characteristics. The purpose of this research is to understand the two country's trade structures to fortify the Korea-Sino economic relationship including verifying what is working and what is not. Results - Based on the analysis, bilateral economic activity to achieve a plus trade stimulus environment should be realized in the long run. Both countries should establish guarantee-free trade negotiations and boundaries instead of various non-tariff barriers. Conclusion - Reviewing the research, a sound competitive relationship can be grown for mutual benefit including export market diversification in the near future. The review of the Korea-Sino ship industry is keenly important and investigative research about it is timely because it is a major industry in each country.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.2
• /
• pp.79-85
• /
• 1989

The generation and propagation of shelf wave-like oscillations induced by local wind at a basin with continental shelf and slope are studied by a numerical experiment. Three types of vortices are generated along western boundary and they propagate along the boundaries in the counter-clockwise direction. The first vortex is generated at the early stage of wind stress and its center is located off the continental slope. The second type centered on the continetal slope is generated at about the terminating time of wind stress and follows the first one. The third, centered on continental shelf, decays so soon that its propagation pattern is hard to be identified. Each of those vortices is probably to be one of free modes of the model basin.

• Economic and Environmental Geology
• /
• v.13 no.4
• /
• pp.205-213
• /
• 1980

Stannite is mainly found in hypothermal ore deposits, whereas mawsonite and stannoidite occur characteristically with bornite and chalcopyrite in subvolcanic (xenothermal) ore deposits. Mawsonite always shows the replacement on the rims of stannoidite grains or along the grain boundaries of stannoidite, bornite and chalcopyrite. In the Tada mine, Japan, the following mineral assemblages of the Cu-Fe-Sn-S minerals were observed. 1) bornite-stannoidite; 2) stannoidite-chalcopyrite; 3) stannite-chalcopyrite; 4) bornite-mawsonite-stannoidite; 5) bornite-stannoidite-chalcopyrite; 6) mawsonite-stannoidite-chalcopyrite; 7) stannoidite-stannite-chalcopyrite; 8) bornite-mawsonite-stannoidite-chalcopyrite The heating and D.T.A. experimental results indicate that natural stannoidite containing 3 weight percent of zinc decomposes to bornite, stannite and chalcopyrite at above $500^{\circ}C$, whereas zinc-free synthetic stannoidite is stable up to $800^{\circ}C$. The stability temperature of zincian stannoidite depends on the zinc content. Mawsonite is stable at temperatures below $390^{\circ}C$ and decomposed to stannoidite, bornite and chalcopyrite above it. According to the sulfur fugacity determination by the electrum tarnish method the univariant assemblage of mawsonite, bornite, stannoidite and chalcopyrite requires a higher sulfur fugacity than that of bornite, stannoidite and chalcopyrite assemblage.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.150-159
• /
• 2014

A simplified method for the calculation of buckling and vibrational characteristics of initially stressed rectangular plate and antisymmetric angle-ply laminated plates is presented in this paper using the natural frequencies under unloading state. The equation of motion of rectangular plate with two opposite edges simply supported is investigated on the basis of Rayleigh-Ritz method and Mindlin plate theory with effect of the curvature term. The relationships of the non-dimensional natural frequencies with initial stresses the coeffcients of critical buckling and the boundaries of the dynamic principal instability region can be characterized by the non-dimensional natureal frequencies under unloading state. Numerical examples are presented to verify the simplified equations and to illustrate potential applications of the analysis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.3
• /
• pp.176-183
• /
• 1991

In this paper. boundary element method is applied to the analysis of nonlinear free surface wave. A particular concern is given to the treatment of the open boundaries at the in-flow boundary and out-flow boundary, which uses the mass-flux and energy-flux considering the continuity of fluid. By assuming the fluid to be inviscid and incompressible and the flow to be irrotational. the problem is formulated mathematically as a two-dimentional nonlinear problem in terms of a velocity potential. The equation(Laplace equation) and the boundary conditions are transformed into two boundary integral equations. Due to the nonlinearity of the problem. the incremental method is used for the numerical analysis. Numerical results obtained by the present boundary element method are compared with those obtained by the finite element method and also with experimental values.

• Journal of Korea Foundry Society
• /
• v.29 no.4
• /
• pp.176-180
• /
• 2009

Effect of matrix microstructure on creep behaviors of squeeze cast magnesium matrix composites was investigated. Aluminum borate whisker was used as reinforcement and AZ31, AS52 and Sr added AS52 Mg alloys were used for matrix alloys. The reinforcement was distributed homogeneously and defect-free composite was manufactured. Creep tests were carried out at the temperature of $150^{\circ}C$ under the applied stress of 50 and 100 MPa for Mg alloys and Mg MMCs, respectively. The creep resistance of Mg MMCs was in this order: AS52-Sr > AS52 AZ31 MMCs. Void initiation during creep mainly occurred at $Mg/Mg_{17}Al_{12}$ interface and propagation went along grain boundaries. On the other hand, $Mg_2Si$ phase was not attributed to the creep void initiation.

• Phonetics and Speech Sciences
• /
• v.7 no.2
• /
• pp.103-109
• /
• 2015

This paper describes the development of the Korean corpus of spontaneous speech, also called the Seoul corpus. The corpus contains the audio recording of the interview-style spontaneous speech from the 40 native speakers of Seoul Korean. The talkers are divided into four age groups; talkers in their teens, twenties, thirties and forties. Each age group has ten talkers, five males and five females. The method used to elicit and record the speech is described. The corpus containing around 220,000 phrasal words was phonemically labeled along with information on the boundaries for Korean phrasal words and utterances, which were additionally romanized. According to the test result of labeling consistency, the inter-labeler agreement on phoneme identification was 98.1% and the mean deviation on boundary placement was 9.04 msec. The corpus will be made available for free to the research community in March, 2015.

• Structural Engineering and Mechanics
• /
• v.22 no.4
• /
• pp.483-510
• /
• 2006

The dynamic instability characteristics of laminated composite stiffened shell panels subjected to in-plane harmonic edge loading are investigated in this paper. The eight-noded isoparametric degenerated shell element and a compatible three-noded curved beam element are used to model the shell panels and the stiffeners respectively. As the usual formulation of degenerated beam element is found to overestimate the torsional rigidity, an attempt has been made to reformulate it in an efficient manner. Moreover the new formulation for the beam element requires five degrees of freedom per node as that of shell element. The method of Hill's infinite determinant is applied to analyze the dynamic instability regions. Numerical results are presented to demonstrate the effects of various parameters like shell geometry, lamination scheme, stiffening scheme, static and dynamic load factors and boundary conditions, on the dynamic instability behaviour of laminated composite stiffened panels subjected to in-plane harmonic loads along the boundaries. The results of free vibration and buckling of the laminated composite stiffened curved panels are also presented.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.527-533
• /
• 2015

A simplified method for the calculation of dynamic characteristics of initially stressed antisymmetric cross-ply laminated shells is presented in this paper using the natural frequencies under unloading state. The equation of motion of laminated shell with two opposite edges simply supported is investigated on the basis of Rayleigh-Ritz method and Mindlin shell theory with effect of the curvature term. The relationships of the non-dimensional natural frequencies with initial stresses the coeffcients of critical buckling and the boundaries of te dynamic principal instability region can be characterized by the non-dimensional natureal frequencies under unloading state. Numerical examples are presented t verify the simplified equations and to illustrate potential applications of the analysis.

• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.295-301
• /
• 2000

The effect of V2O5 addition on the low temperature sintering of Pb(Mn1/3Sb2/3)O3-PZT ceramics, which is known as a prominent material for piezoelectric transformer application was studied, and the densification behavior and piezoelectric characteristics of the samples as a function of heating rate were also examined. V2O5 led the system to liquid phase sintering by forming liquid phase during sintering, which accelerated densification through the particle rearrangement in the early stage of sintering. The liquid phase mostly existed at grain boundaries retarded the evaporation of PbO, while the densification temperature and the weight loss of V2O5-free samples were higher than those of samples with V2O5. Faster heating improved the densification of the samples regardless of V2O5 addition. The low temperature sintering at 100$0^{\circ}C$ was achieved in PMS-PZT ceramics with high density and reasonable dielectric and piezoelectric characteristics. This result revealed optimistic way to the development of multi-layered piezoelectric transformers.