• Journal of Nutrition and Health
• /
• v.26 no.3
• /
• pp.299-312
• /
• 1993

Anthropometry, computed tomography(CT) at the umbilical level, nutrient intake, blood pressure, serum levels of lipids and lipoproteins and response of glucose, c-peptide, insulin, and free fatty acid(FFA) during oral glucose tolerance test(OGTT) were estimated on 11 normal-weight controls and 35 overweight and obese middle-agd men. The areas of total abdominal, subcutaneous and visceral were determined by CT scanning technique. Total abdominal fat area correlated the most significantly with the levels of serum lipids, lipoproteins and insulin among several obese indices. Compared with normal-weight controls, overweight and obese men with abdominal fat lower than 29000$\textrm{mm}^2$ showed an increase in waist-hip ratio, areas of total abdominal(35%), visceral and subcutaneous fat and C-peptide response area during OGTT, though age, percent ideal body weight, body mass index, % body fat, and all biochemical indices except C-peptide response area were not different between two groups. Overweight and obese men with abdominal fat greater than 29000$\textrm{mm}^2$ showed a higher values in total abdominal fat(85%), serum levels of triglyceride, total-and LDL-cholesterol, the ratio of LDL-to HDL-cholesterol, and response areas of FFA, insulin and C-peptide during OGTT than normal-weight controls. Overweight and obese men with great abdominal fat showed an increase in alcohol ingestion and percent calorie intake per total energy expenditure, compared with normal-weight controls. Our results indicate that obesity and a certain level of total abdominal fat accumulation is required to observe abnormal levels of serum lipids, lipoproteins and insulin in Korean middle-aged men. In addition, increased alcohol and calorie intake and decreased physical activity could partly explain total abdominal fat accumulation in men.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.151-160
• /
• 2024

Objective: The growing consumers' interest on animal welfare has raised the request of products obtained by alternative rearing systems. The present study was conducted to assess the influence of housing system on gut and muscle morphology and on microbial load in rabbits reared under free-range (FR) and cage system (CS). Methods: A total of forty weaned (35 days of age) male Italian White breed rabbits were allotted according to the rearing system, and at 91 days of age were randomly selected and slaughtered for the morphological evaluation of tissue from duodenum and longissimus lumborum. Morphometric analysis of the villus height, villus width, crypt depth, villus height/crypt depth ratio, and villus surface was performed. The microbial loads on hind muscle was determined by total mesophilic aerobic count (TMAC), Escherichia coli and Enterobacteriaceae; whereas, total anaerobic bacteria count (TABC) and TMAC, E. coli and Enterobacteriaceae was determined on caecal content. Results: Rearing system did not interfere with the duodenum and muscle histomorphology in both rabbit groups. Similarly, microbial load of caecal content showed no significant differences on the TABC and TMAC. Conversely, significant difference was found for E. coli strains in caecal content, with the lower counts in FR compared to CS rabbits (p<0.01). Microbiological assay of muscle revealed significant lower TMAC in FR vs CS rabbits (p< 0.05). All rabbit meat samples were negative for E. Coli and Enterobacteriaceae. Conclusion: Free-range could be considered a possible alternative and sustainable rearing system in rabbits to preserve gut environment and muscle quality.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.45.1-45.8
• /
• 2015

Background: Radial forearm free flap is the most reliable flap for intraoral soft tissue reconstruction after cancer ablation surgery. However, unesthetic scar of the donor site and the need for a second donor site for skin graft are major disadvantages of the forearm flap. The purpose of this study was to report the clinical results of double-layered collagen graft to the donor site of the forearm free flap without skin graft. Methods: Twenty-two consecutive patients who underwent oral cancer ablation and forearm reconstruction between April 2010 and November 2013 were included in this study. Male to female ratio was 12:10, and average age was 61.0 years old (27-84). Double-layered collagen was grafted to the donor site of the forearm free flap and healed for secondary intention. Upper silicone had been trimmed at the periphery during secondary intention, and dry dressing was used. Postoperative scar healing and esthetic results and function were evaluated. Results: An average follow-up period was 34.9 months. The scar area was decreased to 63.9 % in average. The complete healing was obtained between 1.5 and 3 months according to the defect size. There was no functional defect or impairment 3 months after operation. All patients were satisfied with the esthetic results. Three patients died of recurred cancer. Conclusions: Double-layered collagen graft was successfully performed in this study. Without the thigh skin graft, patients had experienced less painful postoperative healing periods and discomfort.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.35-42
• /
• 1998

Surface mount technology is the biggest theme in the area of deιIronic component. To miniatunze an electronic component, s such as ferrite chip inductor, the cer뼈lic wet process for green-sheet lamination and/or screen printing method through a s solvent medium system is widely used. The preparation and characterization of NiCuZn Ferrite (NCZF) shurry and the green s sheet using the water mixed binder system has been studied. The 21 vol% of NCZF slurry was prepared by a ball milling. The p polyacrylic vinyl copolymer (Mw; 60,000) was used as a binder. Th$\xi$ mixture of distilled water, isopropyl alcohol (IPA) and 2l butoxy ethanol was used as a dispersion medium. The water content of medium varied from about 40% to 80%. As the results. Thc disp$\xi$rston stability of the NCZF slurry was attributed to the free polymer rather than the electrostatic force of the particle. T The viscosity of the NCZF slurry was greatly depended on the ratio of water content in the medium.

• Korean Journal of Radiology
• /
• v.23 no.2
• /
• pp.159-171
• /
• 2022

Objective: This study aimed to investigate the impact of baseline values and temporal changes in body composition parameters, including skeletal muscle index (SMI) and visceral adipose tissue area (VAT), measured using serial computed tomography (CT) imaging on the prognosis of operable breast cancers in Asian patients. Materials and Methods: This study retrospectively included 627 Asian female (mean age ± standard deviation [SD], 53.6 ± 8.3 years) who underwent surgery for stage I-III breast cancer between January 2011 and September 2012. Body composition parameters, including SMI and VAT, were semi-automatically calculated on baseline abdominal CT at the time of diagnosis and follow-up CT for post-treatment surveillance. Serial changes in SMI and VAT were calculated as the delta values. Multivariable Cox regression analysis was used to evaluate the association of baseline and delta SMI and VAT values with disease-free survival. Results: Among 627 patients, 56 patients (9.2%) had breast cancer recurrence after a median of 40.5 months. The mean value ± SD of the baseline SMI and baseline VAT were 43.7 ± 5.8 cm²/m² and 72.0 ± 46.0 cm², respectively. The mean value of the delta SMI was -0.9 cm²/m² and the delta VAT was 0.5 cm². The baseline SMI and VAT were not significantly associated with disease-free survival (adjusted hazard ratio [HR], 0.983; 95% confidence interval [CI], 0.937-1.031; p = 0.475 and adjusted HR, 1.001; 95% CI, 0.995-1.006; p = 0.751, respectively). The delta SMI and VAT were also not significantly associated with disease-free survival (adjusted HR, 0.894; 95% CI, 0.766-1.043; p = 0.155 and adjusted HR, 1.001; 95% CI, 0.989-1.014; p = 0.848, respectively). Conclusion: Our study revealed that baseline and early temporal changes in SMI and VAT were not independent prognostic factors regarding disease-free survival in Asian patients undergoing surgery for breast cancer.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.14 no.3
• /
• pp.13-22
• /
• 1977

The hydrodynamic forces acting on a forced oscillating 2-dimensional cylinder on a free surface of a fluid of a finite depth are calculated by distributing singularities on the immersed body surface. And the Haskind-Newman relation in a fluid of a finite depth is derived. The wave exciting force of the cylinder to an oscillation is also calculated by using the above relation. The method is applied to a circular cylinder swaying in a water of finite depth, and then, to a rectangular cylinder heaving, swaying, and rolling. The results of above cases give a good agreement with those by earlier investigators such as Bai, Keil, and Yeung. Also, this method is applied to a Lewis form cylinder with a half beam-to-draft ratio of 1.0 and a sectional area coefficient of 0.941, and to a bulbous section cylinder which is hard to represent by a mapping function. The results reveal that the hydrodynamic forces in heave increase as the depth of a water decrease, but in sway or roll, the tendency of the hydrodynamic forces is difficult to say in a few words. The exciting force to heave for a bulbous section cylinder becomes zero at two frequencies. The added mass moment of inertia for roll is seemed to mainly depend on the sectional shape than the water depth.

• Structural Engineering and Mechanics
• /
• v.44 no.1
• /
• pp.61-72
• /
• 2012

The paper is on contact analysis of a spherical ball with a deformable flat, considering the effect of tangent modulus on the contact parameters of a non-adhesive frictionless elastic-plastic contact. The contact analysis of this model has been carried out using analysis software Ansys and Abaqus. The contact parameters such as area of contact between two consecutive steps, volume of bulged material are evaluated from the formulated equations. The effect of the tangent modulus is considered for determining these parameters. The tangent modulus are accounted between 0.1E and 0.5E of materials E/Y value greater than 500 and less than 1750. Result shows that upto an optimal tangent modulus values the elastic core push up to the free surface in the flat. The simulation is also carried out in Abaqus and result provide evidence for the volume of bulged material in the contact region move up and flow into the free surface of the flat from the contact edge between the ball and flat. The strain energy of the whole model is varied between 20 to 40 percentage of the stipulated time for analysis.

• Journal of the Korea Society for Simulation
• /
• v.11 no.3
• /
• pp.23-34
• /
• 2002

Dynamic storage allocation (DSA) is a field fairly well studied for a long time as a basic problem of system software area. Due to memory fragmentation problem of DSA and its unpredictable worst case execution time, real-time system designers have believed that DSA may not be promising for real-time application service. Recently, the need for an efficient DSA algorithm is widely discussed and the algorithm is considered to be very important in the real-time system. This paper proposes an efficient DSA algorithm called QSB (quick semi-buddy) which is designed to be suitable for real-time environment. QSB scheme effectively maintains free lists based on quick-fit approach to quickly accommodate small and frequent memory requests, and the other free lists devised with adaptation upon a typical binary buddy mechanism for bigger requests in harmony for the .improved performance. Comprehensive simulation results show that the proposed scheme outperforms QHF which is known to be effective in terms of memory fragmentation up to about 16%. Furthermore, the memory allocation failure ratio is significantly decreased and the worst case execution time is predictable.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.5 no.2
• /
• pp.1-26
• /
• 1968

This work is a general treatment of added mass calculation of two-dimensional cylinders with straight-framed sections and chines oscillating in the free surface of an ideal fluid with high frequencies. Two and three parameter families in vertical oscillations are treated by employing Schwarz-Christoffel transformation. The results are presented with regards to geometrical parameters such as chine engles, sectional area coefficient and beam draft ratio.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.5
• /
• pp.317-324
• /
• 2014

Environmental tobacco smoke (ETS) samples were collected separately in mainstream and side-stream smoke using a self-designed smoking machine, and a total 40 of PM2.5 was collected with low volume air sampler at indoor environments with and without ETS in Daejeon, Korea. About 20 trace elements including toxic metals like As, Cr, Mn, Se, V, and Zn were determined in PM2.5 and ETS samples by instrumental neutron activation analysis (INAA). It is found that the emission factors of K, Cl, Na, and Al were much higher than those of toxic elements for both mainstream and side-stream smoke. The average concentration of PM2.5 was enriched by 1.5 times at smoking area ($58.7{\pm}18.1{\mu}g/m^3$) than at smoking free area ($38.6{\pm}12.7{\mu}g/m^3$). The concentration ratio of each element between smoking and smoking free area were ranged from 1.1 to 6.0 except Cu (1.0); especially, Ce (6.0), La (5.2), K (2.3), and Co (2.0) showed higher ratio, which suggests that the ETS is one of the possible increasing factors of PM2.5 and elemental concentration at indoor environment.