• 대한조선학회지
• /
• 제11권2호
• /
• pp.7-14
• /
• 1974

Hydrodynamic moments produced by the rolling oscillation on the free surface and the associated swaying force were exactly calculated by Ursell-Tasai method for the cylinders with Kim's chine form sections($a_1,\;a_7$). The coefficient of the added moment of inertia $K_{\varphi^{\tau}}$, the progressive wave height ratio $\bar{A}$, the coefficient of swaying forces $K_{RS}$, ${\alpha}_{RS}$ of rolling oscillations are shown in the several figures. The results of the computation were compared with those of lewis form sections. It is concluded that the effect of the section form on the added moment of inertia is significant for the cylinder with the section of same beam-draft ratio and sectional area coefficient, on the other hand, a little effect appears on the wave damping.

• 대한지역사회영양학회지
• /
• 제10권3호
• /
• pp.303-310
• /
• 2005

The purpose of this study was to compare the nutrient intake and foodservice satisfaction of homebound elderly had lunch at the local community centers by the difference of meal service charge. Two local community center with cons-regate meal service program located in Daegu and Gyongsan were selected; one with free of meal service charge (F), and the other with 500-1,000 won for meal service charge (K), According to the dietary assessment, energy and nutrient intakes of the 156 elderly subjects were as a whole under the Korean Recommended Dietary Allowance (RDA). Elderly or F service conte. showed higher $\%$ RDA for the selected nutrients and MAR (mean adequacy ratio) than those of K service center (p<0.001). Participants were satisfied with most of the congregation meal service from community conte. with different reasons such as 'tasty (K service center)' and 'free of charge (F service center)'. In conclusion, elderly had the lunch at the community center with free of meal service charge was poor nutrition status and lower socioeconomic level than the other type of community center in this area. Therefore, healthy menu for elderly should be developed and managed by professional dietitian, as well as its impact on health status of this group, and congregate meal service system might be extended to the homebound elderly of whole community with free of charge.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.757-764
• /
• 2004

This paper deals with the numerical study on the displacement behavior of corner areas in an excavation site. Several corner areas always exist in the excavation site. The corner area has two free surfaces, which may become serious weak point from the viewpoint of structural stability. If the structural reinforcements are not applied adequately in corner areas, significant displacement of retaining wall could occur. What is worse, the collapse of retaining system rarely happens. In this paper, 3D numerical analyses were performed to investigate the effect of the arrangement of diagonal and normal strut. From the analysis results, it is found that the spacing between diagonal strut and normal strut should be less than 4m to avoid excessive displacement due to excavation.

• Computers and Concrete
• /
• 제14권3호
• /
• pp.263-277
• /
• 2014

This study investigated four electric field configurations of two-dimensional accelerate lithium migration technique (ALMT), including line-to-line, plane-to-line, contour-to-line and plane-to-plane, and analyzed the ion migration behavior and efficiency. It was found that the free ion distribution diagram and voltage distribution diagram were similar, and ions migrated in the power line direction. The electrode modules were used for the mortar specimen with w/c ratio of 0.5. The effectively processed areas accounted for 14.1%, 39.0%, 49.4% and 51.4% of total area respectively on Day 28. Larger electrode area was more advantageous to ion migration. In addition, it was proved that the two-dimensional electric field could be divided into different equifield line active regions, and regarded as affected by one-dimensional electric field, and the ion migration results in various equifield line active regions were predicted by using the duration analysis method based on the theoretical model of ion migration obtained from one-dimensional test.

• 한국공간구조학회논문집
• /
• 제7권5호
• /
• pp.75-82
• /
• 2007

본 연구는 지붕개폐형 구조물에서 지붕을 개폐함으로써 나타나는 음장의 특성변화를 파악하기 위하여 1/20스케일의 축소모형을 제작하고 이를 대상으로 개폐율을 조절하면서 음장변화를 측정 분석하였다. 공간의 음향설계 시 사용되는 기존의 설계 및 평가파라메타들을 검토한 결과, 잔향음의 감쇠과정이 비선형적이며 기존의 잔향감 평가파라메타인 잔향시간에 의해서 적절한 설계 및 성능평가가 이루어지기 어려울 것으로 분석되었다. 특히 비선형적 감쇠구간에 대한 선형적 curve-fitting에 의해 실제 청감과는 거리가 먼 매우 긴 잔향시간이 도출되어 실질적인 효용성이 의심된다. 따라서 잔향시간(T30)을 음향설계 및 평가과정에서 중요설계변수로 활용 시 완공 후 얻게 되는 음장특성과 상이한 결과를 초래할 가능성이 있다. EDT의 경우 전체적으로 초기감쇠시간은 개폐율이 증가할수록 짧아지는 경향을 나타내었다. 주파수별로 저주파수대역에서의 감쇠율이 가장 높게 나타났으며 고주파수 대역으로 갈수록 감쇠율은 둔화되는 것으로 평가되었다. 명료도 관련 파라메타인 D50 또한 개폐에 따른 음장의 변화를 효과적으로 나타내고 있는 것으로 분석되었다. 객석부위별로는 지붕개폐면에 직접 노출되지 않는 객석에서 개폐율 증가에 따라 선형적인 감쇠현상이 나타나고 있으나, 직접 노출되는 객석의 경우에는 40%이상의 개폐율에서는 명료도와 잔향감에 영향을 거의 미치지 않는 것으로 나타났다.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.33-39
• /
• 2010

The moisture absorption properties such as diffusion coefficient and moisture content ratio of liquid type epoxy resin systems with the filler were investigated. Bisphenol A type and Bisphenol F type epoxy resin, Kayahard MCD as hardener and 2-methylimidazole as catalyst were used in these epoxy resin systems. The nano-sized spherical type fused silica as filler were used in order to study the moisture absorption properties of these liquid type epoxy encapsulant according to the change of filler size. The temperature of glass transition (Tg) of these epoxy resin systems was measured using Dynamic Scanning Calorimeter (DSC), and the moisture absorption properties of these epoxy resin systems according to the change of time were observed at $85^{\circ}C$ and 85% relative humidity condition using a thermo-hygrostat. The diffusion coefficients in these systems were calculated in terms of modified Crank equation based on Ficks' law. An increase of Tg and diffusion coefficient with filler size in these systems can be observed, which are attributed to the increase of free volume with Tg. The change of maximum moisture absorption ratio according to the filler size and filler content cannot be observed; however, the diffusion coefficients of these systems decreased with filler content. The diffusion via free volume is dominant in the epoxy resin systems with low nano-sized filler content; however, the diffusion with the interaction of absorption according the increase of the filler surface area is dominant in the liquid type epoxy encapsulant with high nano-sized filler content.

• 분석과학
• /
• 제12권5호
• /
• pp.415-420
• /
• 1999

칼라필터의 Black Matrix (BM)의 표면에 발생하는 잔사의 양을 Atomic Force Microscopy (AFM) 측정 결과에 의해 얻어진 히스토그램을 사용하여 정량화하였다. 히스토그램을 free BM 표면(1)과 잔사(2)에 해당하는 두 개의 Gaussian 함수로 분리하고 각 분포의 면적($a_1$, $a_2$)을 계산하여, 잔사가 차지하는 면적비($a_2/(a_1+a_2)$)를 계산하였다. 또한, free BM 표면에 대한 Gaussian 함수로부터 free BM 표면내에 또 다른 잔사가 존재하고 있음을 알 수 있었다. 이것의 경우에는 잔사의 양을 정확하게 수치적으로 정량화는 할 수 없지만, 분포의 평균값과 표준 편차로부터 정성적인 결과를 얻을 수 있다.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.43-48
• /
• 2015

Silver nanowire (AgNW) is a material that is increasingly being used for transparent electrodes, as a substitute for indium tin oxide (ITO), owing to its flexibility, high transmittance to sheet resistance ratio, and simple production process. This study involves manufacturing large-area organic photovoltaic cells (OPVs) deposited on AgNW electrodes. We compared the efficiency of OPVs with ITO and AgNW electrodes. The results verified that an OPV with an AgNW electrode performed better than that with an ITO electrode. Furthermore, by using the knife coating method, we successfully fabricated large-area OPVs without the loss of efficiency. Use of AgNW instead of ITO demonstrated that an OPV could be produced on various substrates by the solution process method, dropping the productions costs significantly. Additionally, by using the knife coating method, the process time and amount of wasted solution are reduced. This leads to an increase in the efficient fabrication of the OPV.

• Current Photovoltaic Research
• /
• 제5권3호
• /
• pp.95-99
• /
• 2017

The interconnecting shingled solar cells method shows extremely high ratio active area per total area and has the excellent potential for high power PV (photovoltaic). Compared to the conventional module, it can have much more active area due to busbar-free structure. The properties of ECA (electrically conductive adhesives) are significant to fabricate the shingled array PV since it should be used in terms of electric and structural connection. Various ECA were tried and characterized to optimize the soldiering conditions. The open circuit voltage of shingled array cells showed a three-fold increase and efficiency was also increased by 1.63%. The shingled array cells used in CE3103WLV showed the highest power and in CA3556HF the lowest curing temperature and very fast curing time.

• Structural Engineering and Mechanics
• /
• 제82권2호
• /
• pp.173-189
• /
• 2022

This study presents an experimental and numerically study about the effects of fiber reinforcement ratio on the behavior of concrete-filled steel tubes (CFST) under dynamic impact loading. In literature have examined the behavior of GFRP and FRP wrapped strengthened CFST elements impact loads. However, since the direction of potential impact force isn't too exact, there is always the probability of not being matched the impact force of the area where the reinforced. Therefore, instead of the fiber textile wrapping method which strengthens only a particular area of CFST element, we used fiber-added concrete-filled elements which allow strengthening the whole element. Thus, the effect of fiber-addition in concrete on the behavior of CFST elements under impact loads was examined. To do so, six simply supported CFST beams were constructed with none fiber, 2% fiber and 10% fiber reinforcement ratio on the concrete part of the CFST beam. CFST beams were examined under two different impact loads (75 kg and 225 kg). The impactors hit the beam from a 2000 mm free fall during the experimental study. Numerical models of the specimens were created using ABAQUS finite element software and validated with experimental data. The obtained results such as; mid-span displacement, acceleration, failure modes and energies from experimental and numerical studies were compared and discussed. Furthermore, the Von Misses stress distribution of the CFST beams with different ratio of fiber reinforcements were investigated numerically. To sum up, there is an optimum amount limit of the fiber reinforcement on CFST beams. Up to this limit, the fiber reinforcement increases the structural performances of the beam, beyond that limit the fiber reinforcement decreases the performances of the CFST beam under transverse impact loadings.