• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.77-83
• /
• 1999

H.263 is an international standard of ITU-T that can makes the service such as video phone, video conference in the transmission line less than 64Kbps. This recommendation draft has used motion estimation/compensation, transform coding and quantizing methods. TMN5 used for the performance estimation of H.263 has fundamentally used DCT in transform coding method and presented quantizer for quantizing the DCT transform coefficient. This paper is presenting adaptive quantizer effectively able to quantize DCT coefficient considering the human visual sensitivity while the structure of TMN5 is maintaining. As quantizer that proposed DCT-based H.263 could make transmit more frame than TMN5 in a same transfer speed, it could lower the frame drop effect. And the luminance signal appeared the difference of -0.3 ～ +0.7dB in the average PSNR for the estimation of objective image quality and the chrominance signal appeared the improvement in about 1.5dB in comparision with TMN5. As a result it can attain the better image quality compared to TMN5 in the estimation of subjective image quality.

• Journal of architectural history
• /
• v.16 no.1
• /
• pp.83-99
• /
• 2007

This study examines the joint and splice of wooden structure at Geunjeongjeon Hall of Gyengbok Palace, which was constructed in the late Joseon Dynasty. The scope of the study is on the part of columns, the bracket sets, and the frame structure. This research also deals with the relationship between vortical load and horizontal load. Firstly, the examination of the joint and splice methods between the pillar and penetrating ties is on the joint and splice methods of the outer and corner. Through the investigation, it is verified that the joint methods between pillar and penetrating tie on the outer and corner pillars is the method of Sagal joints(cross joints, 사개맞춤). Joints used between pillar and penetrating tie are dovetailed tenon joints, between columns and Anchogong(안초공), between columns and Choikgong(초익공) are tenon joint(장부맞춤). Secondly, the examination of the joint and splice methods of the bracket set is on that of Salmi and Cheomcha(첨차), and Salmi and Janghyeo(장혀). Joints used between Salmi and Cheomcha, Salmi and Janghyeo are halved joint, and between each Janghyeo are stepped dovetailed splice. It is Cheomcha that is used the Jujang-Cheomcha(주장첨차) on center line. Therefore it is connected with each bracket set, which gets to is the strong system, easy and convenient on the construction of that. Thirdly, the frame structure of wooden architecture in royal palace is consist of purlins and beams, Janghyeo(장혀, timber under purlin), tall columns, king posts, etc. Through the investigation, it is verified that the joint and splice methods between purlins and beams are used with the methods of Sungeoteok joint(숭어턱맞춤). It is verified that the joint and splice methods between beams and high columns are used with methods of mortise and tenon joint(장부맞춤), is highly related with tensile force. To reduce the separation of parts, sangi(산지) and tishoi(띠쇠) are used as a counterproposal, which were generally used for architecture in royal Palaces in the late Joseon Dynasty and continued to be used until these days common wooden architecture.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.6
• /
• pp.47-56
• /
• 2015

In the multi-sensor system, sensor registration errors such as a sensor bias must be corrected so that the individual sensor data are expressed in a common reference frame. If registration process is not properly executed, large tracking errors or formation of multiple track on the same target can be occured. Especially for launch vehicle tracking system, each multiple observation lies on the same reference frame and then fused trajectory can be the best track for slaving data. Hence, this paper describes an on-line bias estimation/correction and asynchronous sensor fusion for launch vehicle tracking. The bias estimation architecture is designed based on pseudo bias measurement which derived from error observation between GPS and radar measurements. Then, asynchronous sensor fusion is adapted to enhance tracking performance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.6
• /
• pp.37-49
• /
• 2002

The objective of this research was an investigation of the important green spaces in Daegu and to present the basic frame of green network in Daegu. Present the condition of the significant green spaces is as follows: In the 3km radius of the city center, the isolation and discontinuation of the green spaces was extensive, caused by crowding of houses and funeral parlours. Consequently, the isolation relaxation which leads to the additional creation of the green spaces and a buffering plan were demanded. In the transfer area of a 3∼6km radius, which is located between the city center's congested area and the suburb green spaces, the significant green spaces had high connection and buffering characteristic, but in the northwest and the south, serious discontinuation appeared between the suburb green spaces and the city conte green spaces. In the 6∼9km radius, the suburb important green spaces accomplished the function which extended the back core green spaces to the city center area. But creation of buffering green spaces was necessary in part because of proximity to the resident area. The results suggest a connection between green spaces on the base of the distribution of the important green spaces, were as follows: In the 3km radius, irregular direction lines appeared while a schedule one direction line appeared in 3∼6km and 6∼9km radius. The discontinued parts of the green network were caused by industrial complexes, house crowding, and cultivation areas. Consequently, reservation and creation plans of green spaces in response to this were demanded. Through the additional creation of green spaces in the discontinued parts, the basic frame of green network in Daegu was the radiation annular form. And it was suitable to activate the parks and the general green spaces.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.859-869
• /
• 2012

In this paper, a new method to efficiently generate the 3-D(three-dimensional) video holograms for 3-D moving scenes, which is called here the TSR-N-LUT method, is proposed by the combined use of temporal-spatial redundancy(TSR) of 3-D video images and novel look-up table(N-LUT) technique. That is, in the proposed scheme, with the differential pulse code modulation (DPCM) algorithm, temporally redundancy redundant data in the inter-frame of a 3-D video images are removed between the frames, and then inter-line redundant data in the inter-frame of 3-D video images are also removed by using the DPCM method between the lines. Experimental results show that the proposed method could reduced the number of calculated object points and the calculation time of one object point by 23.72% and 19.55%, respectively on the average compared to the conventional method. Good experimental results with 3-D test moving pictures finally confirmed the feasibility of the proposed method to the fast generation of CGH patterns of the 3-D video images.

• Progress in Medical Physics
• /
• v.3 no.1
• /
• pp.63-69
• /
• 1992

Recently, stereotactic radiosurgery plan is required with the information of 3-D image and dose distribution. The purpose of this research is to develop 3-D radiosurgery planning system using personal computer. The procedure of this research is based on three steps. The first step is to input the image information of the patient obtained from CT or MR scan into personal computer through on-line or digitizer. The position and shape of target are also transferred into computer using Angio or CT localization. The second step is to compute dose distribution on image plane, which is transformed into stereotactic frame coordinate. and to optimize dose distribution through the selection of optimal treatment parameters. The third step is to display both isodose distribution and patient image simultaneously using superimpose technique. This prototype of radiosurgery planning system was applied recently for several clinical cases. It was shown that our planning system is fast, accurate and efficient while making it possible to handle various kinds of image modelities such as angio, CT and MRI. It is also possible to develop 3-D planning system in radiation therapy using beam's eye view or CT simulation in future.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.37-49
• /
• 2014

This paper aims to interpret the transformation process of town plan of Gosan-up(高山), which was provincial administrative focus town in Josun dynasty, basing on morphological viewpoint. Morphological concepts, such as morphological frame, urban plan, kernel, colonization, route system, fixation line, fringe belt, plan unit & plan division, morphological period derived from the study of Conzen, M.R.G. and Caniggia, G. epidome district, break point, broken plot, urban fallow, privatization are adopted for the interpretation of urban form. Morphological period of Gosan can be divided in four ; formation of kernel & morphological structure, disintegration & redevelopment of the kernel, augmentative development of the kernel & formation of modern epidome district, outwards expanding of urbanized area, transition & reorganization of epidome district. Especially public leading projects such as construction of new regional connection road and public facilities such as myeon(township) office, agricultural cooperatives federation office, market, are main factors of morphological transformation of townplan. In the early stage, under the Japanese imperialism, construction of the new matrix route(Gosan-ro) through the kernel and followed planned routes gave way to disintegrating traditional areal plan unit and forming small block plan units in administrative facilities area. And linear plan units with commercial buildings were formed along the new matrix route and planned route adjacent to periodical market. In the latter stage, with development of public facilities, private sectors' large circulation institution and terminal outside the kernel with planned routes formed areal block based plan units with commercial and public buildings. And part of the spatial area with the linear plan unit were turned into urban fallow. With the transformation of town plan, new roads outside the kernel have substituted for traditional fixation line of waterway with road and topographical feature. Fringe belts were made successively along the new road and around the major intersections outside of existing urbanized area. Land use in fringe belts, constituting of outer locational tendency early on formation, was gradually replaced with commercial & business buildings.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.611-621
• /
• 2005

State of problem: Zirconia all-ceramic restoration fabricated with CAM system is on an increasing trend in dentistry. However, evaluation of the marginal and internal fits of zirconia bridge seldomly have been reported. Purpose: This study was to evaluate the at of margin and internal surface in posterior 3-unit zirconia bridge framework fabricated with CAM system(DeguDent, Germany). Material and Method: Preparations of secondary premolar and secondary molar on artificial resin model were performed for fabrication of 3-unit posterior bridge framework. Fits of 5 zirconia bridge framework were compared with 5 precious ceramo-metal alloy framework(V-GnathosPlus, Metalor, Switzerland), and prepared margins were designed to chamfer and shoulder finishing line. Each framework was cemented to epoxy resin model with reinforced glass ionomer(FujiCEM, GC Co., Japan), embedded in acrylic resin and sectioned in two planes, mesio-distal and buccolingual. Samples were divided into six pieces by sectioning and had two pieces of each surface(i.e mesial, distal, buccal and lingual surface) per abutment, so there were eight measuring points in each abutment. External gap was measured at the margin and internal gaps were measured at the margin, axial and occlusal surface. Gaps were observed under the measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of $\times100$. T-test were used to determine the statistic significance of the different gaps between zirconia and metal framework. Results and Conclusion: 1. External and internal marginal gaps of zirconia and metal framework were in clinically acceptable range. External marginal gaps were not different significantly between zirconia$(81.9{\mu}m)$ and metal $(81.3{\mu}m)$ framework and internal marginal gaps of zirconia $(44.6{\mu}m)$ were smaller than those of metal framework $(58.6{\mu}m)$. 2. Internal axial gaps of zirconia framework$(96.7{\mu}m)$ were larger than those of metal frame-work$(78.1{\mu}m)$ significantly and adversely, internal occlusal gaps of zirconia frame-work$(89.4{\mu}m)$ were smaller than those of metal framework $(104.9{\mu}m)$ significantly. 3. There were no significant differences in external and internal marginal gaps between chamfer and shoulder finish line when zirconia frameworks were fabricated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1183-1191
• /
• 2010

In this paper, I propose an adaptive OFDM CP length algorithm for in PLC systems for smart grid. The proposed scheme calculates the channel delay information at the CP controller of the receiver by taking correlation between a received data frame and the following delayed one. The CP controller, immediately, feeds back the channel delay information to the transmitter. Then, the transmitter adapts CP length for next data frame. As an impulsive noise model, Middleton Class A interference model was employed. The performance is evaluated in terms of packet data rate, cumulative packet data rate, and bit error rate (BER). The simulation results showed data gain (which is the amount of the reduced bits) gets larger as the number of packets increase, but the amount of data gain reduced as the number of branches ($N_{br}$) increase. In respects of BER for the cases $N_{br}$ is 3, 4, and 5, performance of the adaptive CP length algorithm and the fixed CP scheme are similar. Therefore, it is confirmed the proposed scheme achieved data rate increment without BER performance reduction compared to the conventional fixed CP length scheme.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.1-9
• /
• 2016

This paper was studied in two ways with respect to the information received from the video signal separation technique of PPI Scop radar device. The proposed technique consists in generating an image signal through the video signal separation and synthesis, symbol generation, the residual image signal generation process. This technology can greatly improve the operating convenience with improved ease of discrimination, screen readability for the operator in analyzing radar information. The first proposed method was constructed for high-speed FPGA-based information processing systems for high speed operation stability of the system. The second proposed method was implemented intelligent algorithms and a software algorithm function curve associated resources.This was required to meet the constraints on the radar information, analysis system. Existing radar systems have not the frame data analysis unit image. However, this study was designed to image data stored in the frame-by-frame analysis of radar images with express information MPEG4 video. Key research content is to highlight the key observations expresses the target, the object-specific monitoring information to the positive image processing algorithm and the function curve delays. For high-definition video, high-speed to implement data analysis and expressing a variety of information was applied to the ARM Processor Support in Pro ASIC3.