• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2006년도 학술대회
• /
• pp.303-306
• /
• 2006

디지털 콘텐츠 서비스 제공자들이 증가함에 따라, 다양한 DRM 시스템들이 상호호환성에 대한 고려 없이 개발되었다. DRM 시스템 간의 상호호환성 부재는 소비자들이 콘텐츠를 다양한 디바이스 환경에서 사용하지 못하도록 하고 있으며 디바이스 제조자들에겐 다양한 DRM을 지원해야 하는 부담을 주고 있다. 본 논문에서는 서로 다른 DRM 시스템 사이에 상호호환성을 지원하기 위한 새로운 방법을 제안한다. '툴팩'이라 불리는 본 기술은 Open Frame Work 기반으로 기존의 Open Frame Work 기반의 DRM 기술이 가지고 있던 약점인 DRM 툴(Tool)의 보안성을 높이는 동시에 새로운 DRM 툴을 추가하기 위한 확장성과 인터페이스의 간략화로 효율성을 증가시키는 효과가 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.155-158
• /
• 2007

The construction industry kept lower level of the technology and productivity improvement than any other kinds of industry. But in most analysis of previous construction work which promoted the productivity of construction, the analysis process has only developed by the economical efficiency or the time studies through work sampling in construction field, So We suggest motion analysis as a tool to solve these problems. Spacially, this study find out productivity improvement method of steel frame fabrication works with using motion analysis. If the result of this study were to be applied to the actual construction field, it will be of great help for Building Construction Automation.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1553-1562
• /
• 2017

For the purpose of enhancing the performance of the shunt active power filter (APF), this paper presents a novel Fast Weighted Compound Control (FWCC) strategy based on the synchronous frame. In this control strategy, the proposed new repetitive controller can work faster and more stably by reducing the internal model cycle and introducing a damping coefficient. In addition, the harmonic detector can be removed to simplify the structure of the APF owing to the improvements. Furthermore, a proportional-integral (PI) controller is added to work in parallel with the repetitive controller by using a weighted ratio. Then, a convergence speed analysis and design algorithm are given in detail. Simulation and experimental results show that the harmonic distortion is reduced from 2.91% to 1.89%. In addition, the content for each of the characteristic harmonic orders has decreased by more than three times.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.224-225
• /
• 2020

The construction industry is a workforce dependent industry. However, problems with wages have occurred frequently from the past to the present, and the number of skilled workers is decreasing due to the influx of new skilled workers and the departure of existing skilled workers. In response, this paper surveyed the actual status of wage calculation and analyzed the problems and presented a rough improvement plan by surveying the functional personnel of domestic frameworks.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.221-222
• /
• 2022

In this study, the work flow of the construction process was analyzed based on construction monitoring for a building of the middle size beam-column system Precast Concrete(PC) apartment building supplied by LH, and the Arrow Daigram Method(ADM) network diagram of its construction was written. The results of this study are judged to be able to improve productivity by using the PC structure apartment building construction plan to calculate a reasonable construction period and prepare a process management method for the PC structure frame construction.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.141-144
• /
• 2006

The building construction is an essential field to consider weather condition because construction works are performed in a site. From this reason, this study evaluated the effect of weather condition with work sections in building construction by Analytic Hierarchy Proces (AHP) method. The results of this study as follows : (1) The effect of weather condition with work sections is affected by rainfall in summer season, and by a low temperature in winter season (2) The effect of weather condition with work sections is 0.235 for mold work, 0.210 for concrete work, 0.181 for steel-frame work.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.119.2-119.2
• /
• 2005

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.845-850
• /
• 2002

Maglev is the vehicle which can run in levitated condition by the electro-magnets, and the vehicle can run without any contact condition. The vehicle is devided in two parts such as carbody and bogies, and the bogies are the driving device of the vehicle. There are many equipments in the bogie, and the frame endure many loads occurred in the operation of the vehicle. The bogie frame is designed and manufactured in the view of good safety and maintainability, and the engineers work to accomplish this purpose.

• 한국건설관리학회논문집
• /
• 제22권6호
• /
• pp.120-130
• /
• 2021

최근 정부는 건설재해 예방을 위하여 건설공사 안전관리를 강화하고 있으며, 예방적 차원의 작업자 안전관리 방안이 중요한 실정이다. 한편 모듈러 건축은 중고층 건축물 등으로 점차 확대 적용될 예정이나, 작업환경이 열악하고 안전관리가 미흡한 중소규모 건설현장이 많아 재해예방을 위한 안전관리가 미흡한 실정이다. 또한 국내 모듈러 건축의 안전관리 방안은 작업자의 안전사고에 영향을 미치나 시공오차, 하자 등 구조안전과 관련한 요소를 관리하는 품질관리에 집중되어 있어, 작업자의 안전보건을 관리하여 재해를 예방하는 작업자 안전관리는 부족한 실정이다. 따라서 본 논문에서는 국내 연구 개발된 사례들을 분석하고 전문가 자문을 통하여 도출된 모듈러 건축의 작업자 안전관리를 위한 체크리스트의 분류체계를 제안하였다. 분류체계는 공장제작, 운송, 현장시공을 대분류로 구성하였으며, 하위체계는 현장시공의 6가지의 중분류 중 모듈러 골조설치 공사의 세부작업인 양중작업과 조립작업을 중심으로, 12가지의 단위작업을 구분하였다. 그리고 안전관리를 위한 관리요소에 따른 단위작업별 작업내용을 정의하고 분류체계에 최종적으로 반영하였다. 본 연구의 결과가 모듈러 건축의 건설현장에서 효율적인 안전관리를 수행하는데 기여할 수 있기를 기대한다.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.23-35
• /
• 2017

A nonlinear static procedure considering work-energy principle and global failure mechanism to estimate base shears of reinforced concrete (RC) frame-type structures is presented. The relative energy equation comprising of elastic vibrational energy, plastic strain energy and seismic input energy is obtained. The input energy is modified with a factor depending on damping ratio and ductility, and the energy that contributes to damage is obtained. The plastic energy is decreased with a factor to consider the reduced hysteretic behavior of RC members. Given the pre-selected failure mechanism, the modified energy balance equality is written using various approximations for modification factors of input energy and plastic energy in scientific literature. External work done by the design lateral forces distributed to story levels in accordance with Turkish Seismic Design Code is calculated considering the target plastic drift. Equating the plastic energy obtained from energy balance to external work done by the equivalent inertia forces considering, a total of 16 energy-based base shears for each frame are derived considering different combinations of modification factors. Ductility related parameters of modification factors are determined from pushover analysis. Relative input energy of multi degree of freedom (MDOF) system is approximated by using the modal-energy-decomposition approach. Energy-based design base shears are compared with those obtained from nonlinear time history (NLTH) analysis using recorded accelerograms. It is found that some of the energy-based base shears are in reasonable agreement with the mean base shear obtained from NLTH analysis.