• Title/Summary/Keyword: Frame SNR

Search Result 112, Processing Time 0.025 seconds

An Improvement in Intra-Slice Low Delay Video Coding for Digital TV Broadcasting (디지틀 TV 방송을 위한 저지연 intra-slice 영상 부호화 방식의 개선 방법)

  • 권순각;김재균
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.12
    • /
    • pp.2376-2385
    • /
    • 1994
  • In receiving the digital TV signal, both decoding delay and the channel hopping delay are very critical factors in applications. The intra-slice coding in the MPEG-2 SIMPLE PROFLE of No B-picture is one of the primary methods for short delay time in video decoding. It has the advantage of short decoding delay, but has the drawback of long channel hopping delay time. In this paper, we propose a method to reduce the channel delay with negligible loss in SNR performance. It is shown that dividing pictures into several regions of slices and adding some restriction in motion vector search for inter-frame coding. hence the random acess points are effectively increased. and the channel hopping delay is reduced.

  • PDF

Application of Correlation-Aided DSA(CDSA) Technique to Fast Cell Search in IMT-2000 W-CDMA Systems.

  • Kim, Byoung-Hoon;Jeong, Byeong-Kook;Lee, Byeong-Gi
    • Journal of Communications and Networks
    • /
    • v.2 no.1
    • /
    • pp.58-68
    • /
    • 2000
  • In this paper we introduce the correlation-aided distributed sample acquisition (CDSA) scheme for fast cell search in IMT-2000 W-CDMA cellular system. The proposed scheme incorporates the state symbol correlation process into the comparison-correction based synchronization process of the original DSA scheme to enable fast acquisition even under very poor channel environment. for its realization, each mobile station (MS) has to store in its memory a set of state sample sequences. which are determined by the long-period scrambling sequences used in the system and the sampling interval of the state samples. CDSA based cell search is carried out in two stages : First, the MS first acquires the slot timing by using the primary synch code (PSC) and then identifies the igniter code which conveys the state samples of the current cell . Secondly. the MS identifies the scrambling code and frame timing by taking the comparison-correction based synchronization approach and, if the identification is not done satisfactorily within preset time. it initiates the state symbol correlation process which correlates the received symbol sequence with the pre-stored state sample sequences for a successful identification. As the state symbol SNR is relatively high. the state symbol correlation process enables reliable synchronization even in very low chip-SNR environment. Simulation results show that the proposed CDSA scheme outperforms the 3GPP 3-step approach, requiring the signal power of about 7 dB less for achieving the same acquisition time performance in low-SNR environments. Furthermore, it turns out very robust in the typical synchronization environment where large frequency offset exists.

  • PDF

Voice Activity Detection Using Modified Power Spectral Deviation Based on Teager Energy (Teager Energy 기반의 수정된 파워 스펙트럼 편차를 이용한 음성 검출)

  • Song, J.H.;Song, Y.R.;Shim, H.M.;Lee, S.M.
    • Journal of rehabilitation welfare engineering & assistive technology
    • /
    • v.8 no.1
    • /
    • pp.41-46
    • /
    • 2014
  • In this paper, we propose a novel voice activity detection (VAD) algorithm using feature vectors based on TE (teager energy). Specifically, power spectral deviation (PSD), which is used as the feature for the VAD in the IS-127 noise suppression algorithm, is obtained after the input signal is transfomed by Teager energy operator. In addition, the TE-based likelihhod ratio are derived in each frame to modifiy the PSD for further VAD. The performance of our proposed VAD algorithm are evaluated by objective testing (total error rate, receiver operating characteristics, perceptual evaluation of speech quality) under various environments, and it is found that the proposed method yields better results than conventional VAD algorithms in the non-stationary noise environments under 5 dB SNR (total error rate = 2.6% decrease, PESQ score = 0.053 improvement).

  • PDF

Turbo Perallel Space-Time Processing System with LDPC Code in MIMO Channel for High-Speed Wireless Communications (MIMO 채널에서 고속 무선 통신을 위한 LDPC 부호를 갖는 터보 병렬 시공간 처리 시스템)

  • 조동균;박주남;황금찬
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.10C
    • /
    • pp.923-929
    • /
    • 2003
  • Turbo processing have been known as methods close to Shannon limit in the aspect of wireless multi-input multi-output (MIMO) communications similarly to wireless single antenna communication. The iterative processing can maximize the mutual effect of coding and interference cancellation, but LDPC coding has not been used for turbo processing because of the inherent decoding process delay. This paper suggests a LDPC coded MIMO system with turbo parallel space-time (Turbo-PAST) processing for high-speed wireless communications and proposes a average soft-output syndrome (ASS) check scheme at low signal to noise ratio (SNR) for the Turbo-PAST system to decide the reliability of decoded frame. Simulation results show that the suggested system outperforms conventional system and the proposed ASS scheme effectively reduces the amount of turbo processing iterations without performance degradation from the point of average number of iterations.

Variable Iteration Decoding Control Method of Iteration Codes using CRC-code (CRC부호를 이용한 반복복호부호의 반복복호 제어기법)

  • Baek, Seung-Jae;Park, Jin-Soo
    • The KIPS Transactions:PartC
    • /
    • v.11C no.3
    • /
    • pp.353-360
    • /
    • 2004
  • In this Paper, We propose an efficient iteration decoding control method with variable iteration decoding of iteration codes decoding using Cyclic Redundancy Check. As the number of iterations increases, the bit error rate and frame error rate of the decoder decrease and the incremental improvement gradually diminishes. However, when the iteration decoding number is increased, it require much delay and amount of processing time for decoding. Also, It can be observed the error nor that the performance cannot be improved even though increasing of the number of iterations and SNR. So, Suitable number of iterations for stopping criterion is required. we propose variable iteration control method to adapt variation of channel using Frame Error-Check indicator. Therefore, the amount of computation and the number of iterations required for iteration decoding with CRC method can be reduced without sacrificing performance.

Performance Analysis of Frame Synchronization and Structure Detection Utilizing Multiple Frames of the DVB-S2 Satellite Broadcasting System (다수개 프레임을 활용한 DVB-S2 위성방송 시스템의 프레임 동기 및 구조 검출 성능 분석)

  • Kim, Sang-Tae;Kang, Seok-Heon;Sung, Won-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.2A
    • /
    • pp.139-147
    • /
    • 2008
  • DVB-S2 (Digital Video Broadcasting-Satellite, Version 2) system transmits frames which adapt their structures based on the channel conditions, thus requiring simultaneous detection of the start of the Same (SoF) and the frame structure at the initial acquisition stage of the receiver. Also, a very low value of the minimum operating signal-to-noise ratio (SNR) for the acquisition necessitates a method utilizing multiple received frames to meet the required performance. In this paper, performance of joint time synchronization and frame structure detection methods using multiple DVB-S2 frames is evaluated by deriving the detection error probability. In particular, we evaluate the performance and complexity variations when the soft- and hard-decision values of the signal correlation output are used, present the synchronization parameters to optimize the performance, and verify the analysis results via computer simulations.

Performance Improvement of the battening Effect of the new Asymmetric Turbo Codes (새로운 비대칭 구조를 갖는 터보부호의 Flattening Effect의 성능향상에 관한 연구)

  • 정대호;정성태;김환용
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.27 no.6A
    • /
    • pp.533-539
    • /
    • 2002
  • It is well known the fact that turbo lodes has better performance as the number of iteration and the interleaver size increases in the AWGN channel environment. However, as the number of iteration and the interleaver size are increased, it is required much delay and computation for iterative decoding, and caused the flattening effect phenomenon which is very litter BER performance improvement at the arbitrary SNR. In this paper, We proposed the new asymmetric turbo codes, which consist of parallel concatenated turbo codes that use mixed types of component codes with different not only constraint length but also generate polynomial and analyzed its BER performance for log-MAP decoding algorithm with frame size of 128, 256, 512 and 1024 bits, and coding rate of 1/3. As a results of simulation, proposed asymmetric turbo codes verify that its BER performance is superior to conventional symmetric turbo codes. It can be also observed that the flattening effect phenomenon is very reduced by applying the proposed asymmetric turbo codes. It gains respectively 1.7dB ~2.5dB and 2.0dB~2.5dB SNR improvements in the case of short frame(128, 256) and large frame(512, 1024) size for the BER $10_{-4}$>/TEX> region.

Simultaneous Multiple Transmit Focusing Method with Orthogonal Chirp Signal for Ultrasound Imaging System (초음파 영상 장치에서 직교 쳐프 신호를 이용한 동시 다중 송신집속 기법)

  • 정영관;송태경
    • Journal of Biomedical Engineering Research
    • /
    • v.23 no.1
    • /
    • pp.49-60
    • /
    • 2002
  • Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .

An adaptive bandwidth allocation for the two-layer VBR video transmission in ATM networks (ATM망에서 2계층 VBR 비디오 전송을 위한 적응적인 대역할당)

  • 이동은;이청훈;이팔진;김영선;김영천
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.21 no.8
    • /
    • pp.1928-1936
    • /
    • 1996
  • In this paper, we propose an adaptive bandwidth allocation algorithm for the transmission of VBR video through ATM Networks. In order to evaluate the required bandwidth for the VBR video, the characteristics of the compressed VBR video generated by the two-layered coder are analyzed with variations in the number of GOP(N), quantizer scale(q), and the number of low-frequency DCT coefficients(.betha.). The two-layer coder which is used to separate from the number of DCT coefficients is designed to transmit the VBR video efficiently. The compressed data generated by the two-layer coder are splitted into the high priority and low priority cells. If congestion is occurred in ATM networks, the minimum image quality is maintained by the high priority cells. The required bandwidth for VBR video is estimated with a prediction algorithm using the scene anframe correlations as well as the statistical properties of the VBR video sources. Strong correlation among the adjacent slices in a frame represents by the scene correlation andstrong correlation among the frames is represented by the frame correlation. The performance of the bandwidth allocation scheme proposed is evaluated in terms of the bandwith utilization, cell loss rate, and SNR with variations in q, n, .betha.. Simulation rewsults shown that the proposed scheme is superior to the conventional methods.

  • PDF

A study of synchronization scheme for DVB-S2x receivers based on burst super-frame transmission (버스트 슈퍼프레임 전송 기반의 DVB-S2x 수신기를 위한 동기부 설계에 관한 연구)

  • Oh, Jonggyu;Oh, Dukgil
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2016.11a
    • /
    • pp.63-65
    • /
    • 2016
  • DVB (Digital Video Broadcasting)-S2 (Satellite - Second Generation) 표준은 현재 위성방송 시스템으로 가장 많이 사용되고 있는 표준이나, 추가적인 성능향상과 보다 다양한 응용분야에 적용하기 위해 DVB-S2 기술을 확장한 DVB-S2x (Satellite - Second Generation Extension) 시스템이 제정되었다. 그 중에서도 612,540 심볼 길이의 수퍼프레임 (Super-frame) 구조를 선택적으로 도입하여 긴 데이터 길이에 대해 스크렘블링 (Scrambling)을 적용하는 방법과 PLS (Physical Layer Signaling) 코드와 같은 참조 데이터 필드를 반복적으로 사용하는 방법 등을 사용할 수 있도록 하였다. 이를 통해 동일채널 간섭 (co-channel interference)에 대한 강인성을 증가시키고, 매우 낮은 SNR (Signal to Noise Ratio) 환경에서의 수신기 성능 향상 효과를 제공하게 된다 본 논문에서는 버스트 슈퍼프레임 전송 기반의 DVB-S2x 수신기를 위한 동기부를 설계하고 구조를 제안한다. 슈퍼프레임의 포맷은 DVB-S2x Annex E 의 규격 중 2 번 포맷을 이용하였으며, 2 번 슈퍼프레임 포맷은 버스트 (burst) 기반의 전송 방식에 용이한 측면이 있다. 동기부는 크게 버스트 검출부, 주파수 복구부, 신호 이득 조절부 그리고 심벌 타이밍 복구부로 구성된다.

  • PDF