• 항공우주시스템공학회지
• /
• 제18권4호
• /
• pp.61-69
• /
• 2024

최근 항공레저스포츠 분야에 대한 관심이 증가하면서 초경량 항공기의 수요가 증가하고, 이에 대응하여 항공기의 강건한 구조설계의 필요성이 대두되었다. 이를 위해 본 연구에서는 초경량 항공기 프레임 동체의 정적 구조해석과 자유낙하 해석을 진행하였다. 항공기 운용 과정에서 작용하는 하중 조건 및 수직 방향 충돌 조건에 대한 강건 설계와 내추락성을 최대 응력과 안전율을 통해 평가하였다. 이를 위해 유한요소법에 기반한 소프트웨어인 ANSYS Workbench를 사용하였으며, 해석 결과인 응력분포와 변형률을 분석하여 설계한 프레임 동체의 안전성을 점검하였다. 또한, 수직 방향 낙하 충돌 시 발생하는 프레임 동체의 과도한 변형 및 파손 위치를 예측하였다.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.352-357
• /
• 2012

The ground resonance instability of a helicopter with bearingless main rotor hub were investigated. The ground resonance instability is caused by an interaction between the blade lag motion and hub inplane motion. This instability occurs when the helicopter is on the ground and is important for soft-inplane rotors where the rotating lag mode frequency is less than the rotor rotational speed. For the analysis, the bearingless rotor was composed of blades, flexbeam, torque tube, damper, shear restrainer, and pitch links. The fuselage was modeled as a mass-damper-spring system having natural frequencies in roll and pitch motions. The rotor-fuselage coupling equations are derived in non-rotating frame to consider the rotor and fuselage equations in the same frame. The ground resonance instabilities for three cases where are without lead-lag damper and fuselage damping, with lead-lag damper and without fuselage damping, and finally with lead-lag damper and fuselage damping. There is no ground resonance instability in the only rotor-fuselage configuration with lead-lag damper and fuselage damping.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.65-74
• /
• 2002

항공기 동체의 주 구조를 이루는 스킨, 스트링거, 프레임을 복합재료 부재료 대체하여 파손 및 좌굴에 대해 유한요소해석을 수행하였다. 각 부재의 하중은 기존 항공기 MD90-30의 하중을 적용하였으며, 스트링거, 프레임은 I, Z, T-type의 3가지 단면형상을 선정하여 해석하였다. 복합재료 부재의 적층각, 적층수에 따른 부재의 특성을 알아보고, 단면형상에 대한 비교를 수행하였다. 해석결과 파손은 적층각에 좌굴은 적층수에 많은 영향을 받으며, 스킨, 스트링거는 좌굴이 프레임은 축방향 하중에 의한 파손이 부재 설계의 중요한 요소임을 알 수 있었다. 스트링거, 프레임은 준등방성 적층의 경우 [0/60/-60]적층이 좋은 결과를 갖는 것을 알 수 있었고 단면형상에 대해서는 I-type이 가장 좋은 결과를 보였다. 또한 기존 알루미늄 부재와의 비교를 통해 복합재료 부재의 경량성을 확인할 수 있었다.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.108-114
• /
• 2002

본 연구에서는 KSR-Ⅲ 로켓의 날개-동체 조인트에 대한 비선형 유한요소해석을 수행하므로 적절한 설계 개선을 제시하였으며, 최종 설계의 검증을 위해 수행된 구조 시험 결과와 비교하여 해석의 타당성을 평가하였다. 날개-동체 조인트는 동체 프레임 상에 존재하는 체결 홈에 날개의 체결부가 끼워짐으로 연결되는 방식으로 설계되었다. 이 방식은 연결 구조물간의 하중 전달을 주로 구조물간의 접촉면을 통해 이루어지게 하며, 체결 볼트를 통해서는 구조물을 고정하되 전달 하중은 최소화하기 위한 것이다. 조인트 구조의 정확한 해석을 위해 연결 구조물간의 접촉 및 체결 볼트를 통한 하중 전달을 묘사할 수 있는 세심한 구조 모델링을 적용하였다. 해석 결과에 의해 제시된 설계 개선은 구조시험을 통해 안전성이 검증되었으며, 해석 및 시험 결과가 잘 일치하였다.

• 한국기계가공학회지
• /
• 제19권2호
• /
• pp.103-110
• /
• 2020

Riveting is mainly used to assemble the aircraft fuselage. An average of 2~3 workers is needed to assemble an aircraft fuselage consisting of various size frames by riveting. In this study, a riveting process that enables one-person operation using an automated C-frame riveting machine was proposed for improving the efficiency of productivity. The proposed process was verified stability through structural analysis. In the range that can maintain structural stability, panel thickness of the riveting machine and shape were modified to optimizing the shape for reducing the weight of the riveting process. The structural analysis was performed by software ANSYS workbench 19.2. The optimized riveting machine was reduced by 257kg compared to the existing model.

• 항공우주기술
• /
• 제8권1호
• /
• pp.117-131
• /
• 2009

KSLV-1 1단 후방동체 상부 조합체 상세설계를 수행하였다. 동체 사이징 프로그램으로 기본적인 형상을 결정했다. 체결류 기본설계를 통하여 스킨-프레임, 스트링거-프레임의 체결류 선정하였다. 유한요소 프로그램을 통한 프레임 구조해석 및 인터페이스 확인을 통하여 프레임을 설계하였다. 또한 유한요소 프로그램으로 컷 아웃을 고려한 부분을 해석을 수행하여 구조 안전성을 확인하였다. 전단체결류 설계를 위하여 최대 전단하중에 대한 최대전단응력을 유한요소 방법으로 구하였다. 이러한 동체해석 사이징과 유한요소 및 체결류 선정 프로그램을 사용하여 후방동체 상부조합체의 상세설계를 수행하였다.

• 항공우주시스템공학회지
• /
• 제15권2호
• /
• pp.26-35
• /
• 2021

In this study, CFD analysis was conducted to compare the aerodynamic performance of the isolated propeller and pusher propeller, which is affected by the wake of wide fuselage. The moving reference frame (MRF) method was used for isolated propeller analysis, while the MRF and sliding mesh method were used sequentially for the pusher propeller to analyze the change in the aerodynamic characteristics based on the azimuth angle. Under the same torque condition, the thrust of the pusher propeller was greater than that of the isolated propeller. Thrust increment of the pusher propeller was mainly generated near the root of the blade where the fuselage wake was concentrated. The net efficiency of the pusher propeller was greater than or equal to that of the isolated propeller. Because of the flat fuselage shape, thrust and torque of the pusher propeller periodically changed with the rotation of the propeller.

• 항공우주시스템공학회지
• /
• 제1권1호
• /
• pp.36-44
• /
• 2007

This study was performed on preliminary structural design of a small scale WIG craft which has been developed as a next generation high speed maritime transportation system in Korea. A composite structure design using the foam-sandwich for main wing and tail fins and the honeycomb sandwich and skin-stringer-ring frame for fuselage was applied for weight reduction as well as structural stability. A commercial FEM code, NASTRAN for was utilized to confirm the structural safety for the reiterate design modifications to meet design requirements including the target weight. Each main wing was jointed with the fuselage by eight high strength insert bolts for easy assembling and disassembling as well as for assuring the required 20 years service life. For control surface structural design, the channel type spar, the foam sandwich skin and the lug joint were adopted.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.811-823
• /
• 2000

In design and manufacturing airframe structures which are composed of a lot of sub-assemblies and large complex profile shapes it is difficult to reduce so called hardware variations. Accordingly cost increasing factors for manufacturing airframe parts are much more than other machine parts because of the variability of fabricated details and assemlies. To improve cost and quality, accurate assembly methods and DPD techniques are proposed in this paper which are based upon using CAD/CAM techniques, the concept of KC's and the coordinated datum and index throughout the design, tooling, manufacturing and inspection. The proposed methods are applied to produce fuselage frame assemblies and related engineering aspects are described regarding the design of parts and tools in the context of concurrent digital definition. First articles and consequent mass production of frame assemblies shows a great improvement of the process capability ratio from 0.7 by the past processes to 1.0 by the proposed methods in addition to the cost reduction due to the less number of tools, reduced total assembly times and the space compaction needed by massive inventory. The need to achieve better Cpk, however, and future studies to be investigated will be addressed briefly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.265-270
• /
• 2005

This paper presents a new attitude stabilization and control of an unmanned helicopter based on neural network compensation. A systematic derivation on the dynamics of an unmanned small-scale helicopter is performed. Combined rotor-fuselage-tail dynamics is derived in body-fixed reference frame with its origin at the C.G. of the helicopter. And the resulting nonlinear equation of motion consists of 6-DOF air vehicle dynamics as well as the rotor flapping and engine torque equations. A simulation model was modified using the existing simulator for an unmanned helicopter dynamic model, which reflects the unmanned test helicopter(CNUHELI). The dynamic response of the refined model was compared with the flight test data. It can be shown that a good coincidence was accomplished between the real unmanned helicopter system and the mathematical model. This dynamic model was linearized for classical controller design using small perturbation method. A Neuro-PD control system was designed for both longitudinal and lateral flight modes, and the results were compared with the PD-only control response. Simulation results show that the proposed Neuro-PD control system demonstrates better performance.