초록
KSLV-1 1단 후방동체 상부 조합체 상세설계를 수행하였다. 동체 사이징 프로그램으로 기본적인 형상을 결정했다. 체결류 기본설계를 통하여 스킨-프레임, 스트링거-프레임의 체결류 선정하였다. 유한요소 프로그램을 통한 프레임 구조해석 및 인터페이스 확인을 통하여 프레임을 설계하였다. 또한 유한요소 프로그램으로 컷 아웃을 고려한 부분을 해석을 수행하여 구조 안전성을 확인하였다. 전단체결류 설계를 위하여 최대 전단하중에 대한 최대전단응력을 유한요소 방법으로 구하였다. 이러한 동체해석 사이징과 유한요소 및 체결류 선정 프로그램을 사용하여 후방동체 상부조합체의 상세설계를 수행하였다.
In this study, a detail design was conducted for KSLV-1 1st stage Rear Fuselage Upper Compartment assembly. A basic structural sizing was done by the aircraft fuselage sizing in-house program. The frame structural design and the interface check were conducted by the FE and the CAD program. The structural margin of safety was conformed by FE analysis for the normal section model and duct cut-out section models which are the weakest parts of the rear fuselage. The shear stress analysis was performed for a fastener design of the skin-stringer which is most affected by the shear stress induced by the shear load.