• Journal of Korea Foundry Society
• /
• v.36 no.3
• /
• pp.81-87
• /
• 2016

In this study, the effect of scrap ratio on the mechanical properties of Zr alloys was studied. Oxygen content in the ingot cake increased rapidly with increasing fraction of scrap, which can be attributed to the surface oxide of scrap including small pieces of turning, chips, etc. Iron content did not increase much with the increasing addition of scrap, suggesting scrap materials was well reserved in the iron-free container. As-cast structure of Zr alloy with the scrap:sponge ratio displayed plate/or needle ${\alpha}$ phase and no appreciable change of the cast structure was observed with change of scrap fraction. The strength increases with increasing fraction of scrap, which can be attributed to the increase of oxygen content. The ductility decreased slightly with increase of scrap fraction. Dislocation-oxygen interaction is known to increase the strength at the expense of ductility. Ingot cake with intentionally added $Fe_2O_3$ exhibited the drastic decrease of the formability, even exhibited the brittle fracture behavior during rolling. The oxidation resistance, however, increased with the increase of scrap fraction because of high oxygen content, which may prevent more penetration and diffusion of oxygen into matrix.

• The Korean Journal of Emergency Medical Services
• /
• v.11 no.3
• /
• pp.139-152
• /
• 2007

Background and Purpose : Emergencies in the school setting occurs frequently. Therefore, the role of first responders is important. General teachers in elementary schools are expected by first responders in school emergencies. This study attempted to assess needs and demands assessment on the first aid education of general teachers in elementary schools. Method : The subjects of this study were 71 general teachers from 8 elementary schools. Data were collected by the questionnaire during the period from March 19 to April 13, 2007. The data were analyzed through frequency, Cronbach's ${\alpha}$, Independent Two samples t-test, paired T-test, One Way ANOVA, Pearson's Correlation by SPSS win 12.0. Result : 1. It showed that 47.9%(34 persons) of general teachers answerd that they experienced emergencies in elementary school setting. Experienced emergencies were wounds(cut, laceration, abrasion etc.) 79.4%(27 persons), bleeding(including epistaxis) 64.7%(22 person), fracture(including dislocation, sprain) 44.1%(15 person), sting or bite 29.4%(10 persons). 2. It showed that 95.8%(68 persons) of subjects answerd that first aid education are necessary. Also 91.5%(65 persons) of subjects answerd that will be educated first aid if opportunities is given. 3. The total mean showed $2.39{\pm}.40$ in necessities of first aid education and $2.17{\pm}.36$ in needs of first aid education by 3 points Likert scale. Ranking 1 in necessities and needs of first aid education was bleeding control. 4. The total mean in necessities and needs of first aid education showed statistically significant differences(t = 3.453, p = .002). 5. The necessities of first aid education showed significant positive correlations with necessities and needs of first aid education(r = .521, p = .002). Conclusion : These results suggest that education program of first aid on elementary general teachers must be developed through necessities and needs assessment of first aid education and instructors must searched methods to increase needs of first aid.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.1
• /
• pp.7-10
• /
• 2006

Purpose: We analyzed the ankle bony abnormality of patients with marked ankle instability who had chronic ankle sprain more than 3 years. Materials and Methods: We evaluated the chronic ankle sprain (more than 3 years) patients with marked ankle instability tested by varus stress test and anterior draw test from March 2000 to December 2005. Eighty-nine patients (104 ankle) were evaluated and there were 38 males and 51 females. The mean age of patient at the time of diagnosis was 34.5 (range, 18 to 56 years). The average duration of morbidity was 7 years and 3 months (range, 3 years and 3 months to 21 years). The patients who had history of dislocation, fracture, malalignment, operated patients, and rheumatoid ones were excluded. Plain radiographs of AP, lateral, oblique and mortise view were checked. Results: Radilologic abnormalities were found at 74 ankles (71%) among 104 ankles. Frequent sequences of location were anterior talotibial osteophyte, medial malleolar osteophyte, Os subfibulare, lateral malleolar osteophyte. Posteior osteophyte, ankle arthritis, talar articular defect were rarely found. Conclusion: Seventy-one percent among patients with chronic ankle sprain and marked ankle instability showed more than one radiologic abnormalities. Thus, more exclusive and accurate ankle examination should be performed in these patients.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.2
• /
• pp.76-79
• /
• 2014

In treatment of failure in ankle joint replacement therapy, talar avascular necrosis with massive bone defect, talus fracture with severe comminution and bone defect and ankle dislocation, treatment of large bone defects is considerably important for ankle joint stability and union, therefore, the choice of treatment for large bone defects is use of femoral head or iliac crest bone graft and rigid internal fixation. Because first generation total ankle arthroplasty performed for the first time using a cemented fixation technique requires a large amount of bone resection during re-surgery and there is some possibility of a larger bone defect after removal of implants, in cases where prosthesis for the defect is needed, performance of palliative femoral head or iliac crest bone graft and rigid internal fixation can be difficult. We report on a case of a 48-year-old woman who had experienced ankle pain for 25 years since undergoing total ankle arthroplasty. Because the patient had little ankle motion and rigid soft tissue despite a large bone defect caused by aseptic loosening, a good outcome was obtained only for the femoral cancellous bone graft using allo femoral head without internal fixation.

• Journal of Trauma and Injury
• /
• v.31 no.1
• /
• pp.12-15
• /
• 2018

Rib fixations for flail chest or displaced rib fractures are not a new technique. However, reports on rib fixations involving costal cartilage fractures are very few and surprisingly there are no reports of internal fixations involving only the costal cartilage in the English literature. The diagnosis is difficult and the necessity of the procedure may be quite controversial. Placing plates in screws into the costal cartilage alone may seem unstable and easily dislodged or stripped through the cartilage. We report a 31-year-old male scuba diver instructor who underwent rib fixations over his 7th and 8th costal cartilage ribs for severe pain. The procedure was done with conventional plates and screws. He had the plates and screws removed 2 months later due to lingering pain, but with them removed he is now quite happy with the results without pain. The procedure for fixation of painful overlapped costal cartilage is quite simple and can be done with the usual conventional methods, fixating plate and screws directly over the cartilage alone without fixation over the bony rib.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.397-402
• /
• 2018

The study best image for diagnosis of fracture, dislocation and unilateral degenerative arthritis of the Sacroiliac joint, this study was performed to obtain the best image of the joint space of the hip joint by giving angle change to the pelvis phantom and the x-ray tube. I received evaluation. The results of the Receiver Operating Characteristic that in the case of simple photographs for the detection of joint arthritis and degenerative arthritis in the prone position, the photograph taken in the prone position raises the buttocks of the opposite side of the test by $25^{\circ}{\sim}30^{\circ}$ and the x-ray tube is perpendicular to the sagittal plane passing 2.5 cm inward from the thorny vertebra In the lying position, lift the Sacroiliac joint of the test side by $25^{\circ}{\sim}30^{\circ}$, and take a $5^{\circ}$ angle of the x-ray tube angle toward the foot toward the center of the upper bruch spine from it will be helpful to diagnose arthritis. the center of the upper bruch spine to the side of the ankle joints in the transverse direction And posterior direction, it will be helpful to diagnose arthritis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.1-6
• /
• 2005

Injury of permanent teeth by trauma usually occurs to $8{\sim}10\;years$ old children, in mixed dentition. Fracture, dislocation, intrusion, extrusion, avulsion are the common types of trauma in teeth. The injuries which teeth are dislocated from the alveolar sockets can be treated by reduction and fixation. In this case report two children visited Wonkwang University Dental Hospital after the emergency treatment of tooth injury by other medical institutes. In these cases the injured teeth were not reducted properly and showed premature contact. So the teeth were dislocated from the alveolar sockets intentionally and fixed again in the proper position. Unproper reduction can cause premature contact, delay of healing, difficulty of mastication, and malocclusion. For this reason emergency rooms or local dental clinics where patients with dental trauma can be examined first, must know well about the treatment procedure of the injured teeth and should be consulted to the profession when necessary.

• Transactions of Materials Processing
• /
• v.17 no.5
• /
• pp.364-372
• /
• 2008

In this study, the circumferential creep behaviors ofpilgered advanced Zirconium alloy tubes such as Zr-Nb-O and Zr-Nb-Sn-Fe were investigated in the temperature range of $400\sim500^{\circ}C$ and in the stress range of 80$\sim$150MPa. The test results indicate that the stress exponent for the steady-state creep rate of the Zr-Nb-Sn-Fe alloy decreases with the increase of stress(from 6$\sim$7 to 4), while that of the Zr-Nb-O alloy is nearly independent of stress(5$\sim$6). The activation energy of creep deformation is found to be nearly the same as the activation energy for Zr self diffusion. This indicates that the creep deformation may be controlled by dislocation climb mechanism in Zr-Nb-O. On the other hand, the transition of stress exponent(from 6-7 to 4) in Zr-Nb Sn-Fe strongly suggests the transition of the rate controlling mechanism at high stresses. The lower stress exponent at high stresses in Zr-Nb-Sn-Fe can be explained by the dynamic deformation aging effect caused by interaction of dislocations with Sn substitutional atoms.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.174-174
• /
• 2009

The acromioclavicular-hook-plate is one of the surgical treatments for distal clavicle fracture and traumatic acromioclavicular (AC) joint dislocation. Although this procedure can obtain rigid and accurate anatomical reduction of the AC joint, secondary widening of the hook-hole in the acromion is often seen during postoperative follow-up. This complication is owing to the high-degree of mobility of the AC joint. Therefore, it is important to evaluate the effect on these complications due to the position of the hook-hole. The purpose of the present study is to investigate three-dimensionally the effect due to the position of the hook-hole during arm abduction motion. We studied in vivo and three-dimensional kinematics of the normal shoulder joint with use of a markerless bone-registration technique. Magnetic resonance images of 14 shoulders of 7 healthy volunteers were acquired in 7 positions between $0^{\circ}$ and $180^{\circ}$ of abduction. We created three-dimensional computer models of the bones and the acromioclavicular-hook-plate. Based on the three-dimensional kinematics data, we simulated the widening of the hook-hole each different positioning of the hook-hole. The widths of the hook-holes almost linearly increased. And these widths significantly increased, when we put the hook-hole on the acromion from AC joint to 20 mm and 25 mm posterior position.

• Journal of the Korean Society of Safety
• /
• v.9 no.4
• /
• pp.29-41
• /
• 1994

High temperature tensiles tests, steady state creep tests, internal stress tests and creep rupture tests using Al 7075 alloy were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$) in order to investigate the creep behavior and predict creep rupture life From the apparent activation energy Qc and the applied stress exponent n measured, at the temperature range of 9$0^{\circ}C$~l2$0^{\circ}C$, the creep deformation seemed to be controlled by cross slip. On the other hand at the temperature of 20$0^{\circ}C$~23$0^{\circ}C$ the creep deformation seemed to be controlled by dislocation climb but at 47$0^{\circ}C$~50$0^{\circ}C$, by diffusion creep. And the rupture life(t$_{f}$) might be represented by anthermal process attributed to the difference of the applied stress dependence of Internal stress and the ratio of the Internal stress to the applied stress, the thermal activated process attributied to the temperature dependence of the internal stress. Also the ratio between stress dependence of primary creep rate and that of minimum creep rate was measured 0.46, the minimum creep rate is expected to be appromately obtained from master creep curve including the relationship primary creep rate and minumum creep rate. Finally the relationship new rupture parameter and logarithmic stress was represented with including the ratio between the dependence of primary creep rate and that of minimum creep rate, using the new rupture parameter the rupture life predition is exactly expected.d.