• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.686-692
• /
• 1996

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 추계학술발표대회 개요집
• /
• pp.182-184
• /
• 2003

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.205.1-205
• /
• 2002

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.182-182
• /
• 2002

• 산업기술연구
• /
• 제20권A호
• /
• pp.295-301
• /
• 2000

Various nondestructive prospecting method were applied to detect the flaws of concrete structure, but the satisfactory result could not be obtained, yet. Fracture and cavities existing concrete structure will have a bad effect on physical and mechanical characteristic of concrete. This study deal with detection of flaws using seismic first arrival and various inversion method in theoretical model. And ultrasonic seismic method is tried to experimental model to detect fracture and cavity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.381-386
• /
• 1993

This paper describes the dynamic fracture behavior of brittle materials under impact loading by using INSAMCR program with instrumented charpy test machine. To calculate the Dynamic Stress Intensity Factor The finite element analysis methods program, INSAMCR, was used. Dynamic fracture characteristic was researched to verify a relationship between Dynamic Stress Intensity Factor and crack tip propagation velocity in WC-6%Co. The relationship between Dynamic Stress Intensity Factor and crack tip velocity revealed typical .GAMMA. shape. INSAMCR was run to verify experimental results in WC-6%Co and shows a good coincidence.

• 콘크리트학회논문집
• /
• 제13권2호
• /
• pp.146-152
• /
• 2001

프랙탈 기하는 재료의 파괴거동과 같은 자연계에 존재하는 불규칙한 현상을 비정수의 프랙탈 차원으로 정량화할 수 있다. 이런. 프랙탈 차원에 기초하면 프랙탈 도형은 도형의 일부를 확대하면 전체와 같아지는 자기상사성 특성을 지닌다. 프랙탈적 해석방법을 시멘트 복합체의 파괴시의 균열성장거동에 적용하여 복합체의 미세구조와 파괴거동과의 관계를 알아볼 수 있다. 본 연구의 목적은 시멘트 복합체의 파괴시 소산되는 에너지와 균열의 프랙탈 차원과의 관계를 알아보는데 있다. 시멘트 복합체의 파괴실험을 실시하여 파괴에너지를 측정한 후, 파괴시 형성된 균열형상의 프랙탈 차원을 박스계수법을 통해 산정하고 그 관계를 알아보았다. 실험결과 프랙탈 차원과 파괴에너지의 관계는 비례관계를 나타냈으며 파괴에너지에 대한 프랙탈 차원의 정량적 평가가 가능하다고 사료된다.

• 한국수자원학회논문집
• /
• 제34권5호
• /
• pp.449-458
• /
• 2001

단일절리에서 2상유체의 거동을 모의하기 위해 개발된 수치모형의 검증을 위해서 상대투과계수 특성식을 수치모형에 적용하여 가스와 물의 동시거동을 해석한 후, 수치모의 결과를 모형실험결과와 비교하였다. 절리면의 거칠기와 간극의 크기에 댸한 민감도 분석을 실시한 결과, 가스의 이동속도는 절리면의 거칠기와 반비례하였으며, 절리간극의 크기와는 상대투과계수 특성식의 영향으로 단상유체의 흐름에서와 같은 간극크기의 제곱에 비례하는 향상은 보이지 않았다. 수치모형의 현장적용성을 검토하기 위해서 지하 LPG 저장기지에 모형을 적용한 결과, 저장공동에 인접한 단일절리에서의 운영압의 동적변동에 따른 지하수와 프로판가스의 동시거동을 모사할 수 있었다. 절리면이 매끈하고 간극이 작아질수록 운영압과 지하수압의 조절로는 누출된 가스의 이동제어가 불가능해지는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.81-91
• /
• 2008

The weldability of resistance spot welding of TRIP1180 steels for automobile components investigated enhance in order to achieve understanding of weld fracture during tensile-shear strength (TSS) test. The main failure modes for spot welds of TRIP1180 steels were nugget pullout and interfacial fracture. The peak load to cause a weld interfacial failure was found to be related to fracture toughness of the weld and the weld diameter. Although interfacial fracture occurred in the spot welded samples, the load-carrying capacity of the weld was high and not significantly affected by the fracture mode. Substantial part of the weld exhibits the characteristic dimple (or elongated dimple) fractures on interfacial fractured surface also, dimple fracture areas were drawmatically increased with heat input which is propotional to the applied weld current. In spite of the high hardness values associated with the martensite microstructures due to high cooling rate. The high load-carrying ability of the weld is directly associated with the area of ductile fracture occurred in weld. Therefore, the judgment of the quality of resistance spot welds in TRIP1180 steels, the load-carrying capacity of the weld should be considered as an important factor than fracture mode.

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.267-272
• /
• 2004

The purpose of this in vitro study was to evaluate the effect of surface defects and cross-sectional configuration of NiTi rotary files on the fatigue life under cyclic loading. Three NiTi rotary files ($K3^{TM},{\;}ProFile^{\circledR},{\;}and{\;}HERO{\;}642^{\circledR}$) with ＃30/.04 taper were evaluated. Each rotary file was divided into 2 subgroups : control (no surface defects) and experimental group (artificial surface defects), A total of six groups of each 10 were tested. The NiTi rotary files were rotated at 300rpm using the apparatus which simulated curved canal (40 degree of curvature) until they fracture. The number of cycles to fracture was calculated and the fractured surfaces were observed with a scanning electron microscope. The data were analyzed statistically. The results showed that experimental groups with surface defects had lower number of cycles to fracture than control group but there was only a statistical significance between control and experimental group in the $K3^{TM}$ (p<0.05), There was no strong correlation between the cross-sectional configuration area and fracture resistance under experimental conditions. Several of fractured files demonstrated characteristic patterns of brittle fracture consistent with the propagation of pre-existing cracks. This data indicate that surface defects of NiTi rotary files may significantly decrease fatigue life and it may be one possible factor for early fracture of NiTi rotary files in clinical practice.