• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.43-50
• /
• 2018

Applicability of constructing piled raft foundations on soft clay has been given attention in recent years. Lack of sufficient stiffness for soil and thus excessive settlements to allow higher contribution of piles is the major concern in this regard. This paper presents a numerical investigation of performance of piled-raft foundations on soft clay with focusing on a case study. A 3D FEM numerical model is developed using ABAQUS. The model was calibrated by comparing physical and numerical modeling results of other researchers. Then the possibility of using piled-raft system in construction of foundation for a water storage tank in Sarbandar, Iran is assessed. Soil strength parameters in the numerical model were calibrated using the instrumentation data of a heavily instrumented preloading project at the construction site. The results indicate that choosing the proper combination of length and spacing for piles can lead to acceptable differential and total settlements while a high percentage of total bearing capacity of piles can be mobilized, which is an efficient solution for the project. Overall, the construction of piled-rafts on soft clays is promising as long as the total settlement of the structure is not imposing restrictions such as the common 25 mm allowable settlement. But instead, if higher allowable settlements are adopted, for example in the case of rigid steel tanks, the method shall be applicable with considerable cost savings.

• Architectural research
• /
• 제20권3호
• /
• pp.65-73
• /
• 2018

The restoration of foundations supporting the immense load of the stone pagoda at Mireuksa Temple Site prioritizes securing its structural stability. But so far, rammed earth construction is still not easy to determine the structural stability. This paper aims to emphasize that a scientific experimental study was conducted on a rammed earth construction, to identify its methodology and obtain objective data about structural stability of the foundation work. An experimental study fabricated specimens from the soil that had been removed during the excavation survey, determined the allowable bearing capacity through plate load tests, and compared the results with the predicted stress after reassembly of the stone pagoda to estimate the structural stability. Then, the repair method was selected based on the experimental study result. The evaluation method of the restoration of foundations consisted of an examination of the allowable bearing capacity and settlement. The allowable bearing of the reinforced foundation was more than twice the contact pressure under the stacked stones of the pagoda. The possibility of settlement of the rammed earth foundation soil layer during the pagoda assembly is expected to be very low because the settlement amount of the reformed soil layer is less than half of the settlement of the stabilized existing soil layer.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.17-22
• /
• 2009

Reliability analyses were performed to quantify the risk in axially loaded large-scale pile foundations in consideration of pile-soil interaction and uncertainties on various design variables. The finite difference method based on an equivalent soil spring model and a load transfer method and Monte Carlo simulation method are integrated in the framework of reliabilty analysis. The applicability and efficiency of the proposed method in the safety assessment of axially loaded pile-soil system was verified using a realistic example. Since the proposed method can explicitly consider uncertainties in various design variables, and quantify failure probability of a pile foundation, it can be used to estimate risk, to obtain basic informations for life cycle cost analysis, and to develop code requirements for a reliability-based design of pile foundations.

• Geomechanics and Engineering
• /
• 제1권2호
• /
• pp.121-142
• /
• 2009

The paper deals with the applications of spectral finite element method to the dynamic analysis of framed foundations supporting high speed machines. Comparative performance of approximate dynamic stiffness methods formulated using static stiffness and lumped or consistent or average mass matrices with the exact spectral finite element for a three dimensional Euler-Bernoulli beam element is presented. The convergence of response computed using mode superposition method with the appropriate dynamic stiffness method as the number of modes increase is illustrated. Frequency proportional discretisation level required for mode superposition and approximate dynamic stiffness methods is outlined. It is reiterated that the results of exact dynamic stiffness method are invariant with reference to the discretisation level. The Eigen-frequencies of the system are evaluated using William-Wittrick algorithm and Sturm number generation in the $LDL^T$ decomposition of the real part of the dynamic stiffness matrix, as they cannot be explicitly evaluated. Major's method for dynamic analysis of machine supporting structures is modified and the plane frames are replaced with springs of exact dynamic stiffness and dynamically flexible longitudinal frames. Results of the analysis are compared with exact values. The possible simplifications that could be introduced for a typical machine induced excitation on a framed structure are illustrated and the developed program is modified to account for dynamic constraint equations with a master slave degree of freedom (DOF) option.

• 한국지반공학회논문집
• /
• 제21권7호
• /
• pp.73-80
• /
• 2005

도로기초에서 입상재료의 응력의존 특성을 반영하면 응력의존 탄성계수와 응력 의존 포와송 비 모두를 동시에 고려할 수 있다. 이 방식은 기존 연속체 역학에 기초한 해석 방식과는 달리 층모형 내에서 인장력의 발생 대신 압축력의 구현이 가능하여 재료의 강성과 연성에 대한 거동을 동시에 반영하여 입상재료층의 변형 예측에 많은 영향을 주고 있다 따라서 본 논문에서는 도로기초를 대상으로 제안된 응력의존 및 변형 모형을 대상으로 유한요소법에 의한 도로기초 층변형 예측 알고리즘을 제안하였고 층변형 예측시 응력의존의 고려에 따른 영향을 분석하였다.

• 한국지반공학회논문집
• /
• 제15권2호
• /
• pp.139-152
• /
• 1999

근래에 들어 구조물의 대형화에 따라 현장타설 말뚝을 하부 구조물로서 광범위하게 적용하고 있다. 그러나 현장타설 말뚝에 결함이 생기면 상부 하중에 대한 지지력 저하와 함께 침하량이 증가하게 되어 상부 구조물에 치명적인 손실을 초래할 수 있다. 따라서 비파괴시험 기법에 의한 콘크리트 말뚝의 효과적인 건전도 평가기법 개발이 중요하게 대두되고 있다. 본 연구에서는 수치해석을 통하여 콘크리트 말뚝의 건전도 평가에 이용되는 충격반향기법의 적용성을 검토하였다. 3차원 축대칭 유한요소법을 이용하여 건전한 말뚝과 현장타설 말뚝의 전형적인 결함인 병목, 공동, 불량 콘크리트를 포함하는 말뚝, 그리고 지반 및 암반위에 놓인 말뚝에 관한 해석을 수행하였다. 해석결과 현장타설 말뚝에 적용되는 충격반향기법의 적용성 평가에 있어서 유한요소법이 효과적임을 알 수 있었다.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.591-617
• /
• 2015

Standards for seismic assessment and retrofitting of buildings provide deformation limit states for structural members and connections. However, in order to perform fully consistent performance-based seismic analyses of soil-structure systems; deformation limit states must also be available for foundations that are vulnerable to nonlinear actions. Because such limit states have never been established in the past, a laboratory testing program was conducted to study the rotational capacity of small-scale foundation models under combined axial load and moment. Fourteen displacement-controlled monotonic and cyclic tests were performed using a cohesionless soil contained in a $2.0{\times}2.0{\times}1.2m$ container box. It was found that the foundation models exhibited a stable hysteretic behavior for imposed rotations exceeding 0.06 rad and that the measured foundation moment capacity complied well with Meyerhof's equivalent width concept. Simplified code-based soil-structure analyses of an 8-story building under an array of strong ground motions were also conducted to preliminary evaluate the implication of finite rotational capacity of vulnerable foundations. It was found that for the same soil as that of the experimental program foundations would have a deformation capacity that far exceeds the imposed rotational demands under the lateral load resisting members so yielding of the soil may constitute a reliable source of energy dissipation for the system.

• 한국문헌정보학회지
• /
• 제16권
• /
• pp.33-53
• /
• 1989

The purpose of this paper is to forecast the future of library education in Korea. Toward this purpose, first, the historical events of library education in the United States of America and in the United Kingdom are introduced along with the IFLA Standards for Library Schools and the Unesco's General Information Programme. Secondly, the theoretical foundations of library education are extracted from the events. Thirdly, the factors influencing library education as well as library developments are identified, and, finally, the prospects of library education are forecasted in the light of the various factors in the Korean society and the theoretical foundations. The prospects are forecasted as follows: 1. The education for information science will be incorporated in library education. 2. The number of courses related to library services and uses will be increased. 3. The students should be provided with enough hands-on experiences to be familiar with new information technology. 4. The cooperation between library schools and libraries will be reinforced. 5. The departments of library science will cooperate with other departments in the universities in order to utilize the expertise and facilities. 6. The education of graduate schools will be specialized to produce subject specialist librarians and the undergraduate education will produce public and school librarians. 7. Opportunities for continuing education will be provided more and librarians encouraged to participate in those activities. 8. Library association should actively be involved in library education as a provider of continuing education or as a liaison between library schools and libraries. 9. The courses of foundations including library history, library research and preservation of culture will never be neglected.

• Structural Engineering and Mechanics
• /
• 제7권6호
• /
• pp.533-550
• /
• 1999

Optimal design of raft-pile foundations is examined by combining finite element technique and the optimization approach. The piles and soil medium are modeled by three dimensional solid elements while the raft is modelled by shell elements. Drucker-Prager criterion is adopted for the soil medium while the raft and the piles are assumed to be linear elastic. For the optimization process, the approximate semi-analytical method is used for calculating constraint sensitivities and a constraint approximation method which is a combination of the extended Bi-point approximation and Lagrangian polynomial approximation is used for predicting the behaviour of the constraints. The objective function of the problem is the volume of materials of the foundation while the design variables are raft thickness, pile length and pile spacing. The generalized reduced gradient algorithm is chosen for solving the optimization process. It is demonstrated that the method proposed in this study is promising for obtaining optimal design of raft-pile foundations without carrying out a large number of analyses. The results are also compared with those obtained from the previous study in which linear analysis was carried out.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.203-230
• /
• 2012

This paper presents results for impedance (and compliance) functions and input motions of foundations in a layered half-space computed on the basis of a procedure that combines a consistent transmitting boundary with continued-fraction absorbing boundary conditions which are accurate and effective in modeling wave propagation in various unbounded domains. The effects of obliquely incident seismic waves in a layered half-space are taken into account in the formulation of the transmitting boundary. Using the numerical model, impedance (and compliance) functions and input motions of rigid circular foundations on the surface of or embedded in a homogeneous half-space are computed and compared with available published results for verification of the procedure. Extrapolation methods are proposed to improve the performance in the very-low-frequency range and for the static condition. It is concluded from the applications that accurate analysis of foundation dynamics and soil-structure interaction in a layered half-space can be carried out using the enhanced consistent transmitting boundary and the proposed extrapolations.