• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.210-216
• /
• 2001

This paper presents an analytical study that can predict the path-dependent forming limit of anisotropic sheet materials that experience various combinations of strain paths. To predict the forming limit diagrams(FLD), the proposed analytical procedure is performed within the framework of the Marciniak and Kuczynski(M-K) approach by using the Barlat and Lians non-quadratic anisotropic yield criterion and introducing the effect of the existence of a strain gradient over a stretching punch. The predicted path-dependent forming limit of an anisotropic sheet has been compared with the published experimental results. It has been found that the predicted path-dependent forming limits are in good agreement with the experimental data.

• 소성∙가공
• /
• 제9권1호
• /
• pp.3-9
• /
• 2000

The new FLD of the laser welded blank, which includes FLCs of welded zone and base metals, is introduced. For the forming limits of welded zone, the hemispherical dome punch tests were performed with various widths of asymmetric specimen. The FLC0 as well as the dome height at fracture associated with various specimen widths in the same and different thickness combinations were found to see the formability depending on thickness combinations. In order to show the application of the new FLD, the measured strains of squared cup drawing and simulated strains of door inner panel stamping were compared with those of FLCs. The successful prediction of fracture in the applications reveals that the forming limits of welded zone and base metals should be separately found for more accurate evaluation of the formability and workability of the laser welded blank.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.249-252
• /
• 2005

Recently, as the industrial demand for small quantity batch production of sheet metal components, the application of dieless forming technology to production of these component rise with the advantages of the reduction in manufacturing cost and time. In dieless forming processes, the determination of moving path of tool plays an important role in producing successfully formed parts. In order to obtain the optimized moving path of tool avoiding forming failure, it is necessary to examine the forming limit of sheet material. Therefore, in this study, as the new criterion to evaluate the formability of sheet material in dieless forming processes FDD(feeding depth diagram) with respect to feeding depth and punch diameter is proposed. Thus, the FDD for the sheet materials of STS304 and Ti-grade2 were obtained from a series of FDT(feeding depth test). In addition the possibility of the application of FLD in judging forming severity in dieless forming processes was investigated by comparing the results of FE analyses based on FLD and experimental FDT.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.254-257
• /
• 2003

The modified yield function of Gologanu-Leblond-Devaux in conjunction with the Barlat and Lian's yield criterion is studied to clarify the plastic deformation characteristic of voided anisotropic sheet metals. The void growth of an anisotropic sheet under biaxial tensile loading and damage effect of void growth on forming limits of sheet metals are investigated. Also, the shape parameter defining non-spherical(prolate ellipsoidal) voids with initially random orientations is introduced in M-K model. The predicted forming limits are compared with the published experimental data.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.777-787
• /
• 1985

본 논문에서는 스트레치 플랜징과 슈링크 플랜징에 대하여 각 공정에서의 성 형한계를 이론적으로 구하여 이를 실험과 비교검토함으로써 효과적인 성형한계예측 방 법을 개발하는데 주안점이 있다. 스트레치 플랜징의 경우는 Wang과 Wenner의 연구에 서 얻어진 결과를 이용하여 여기에 기본적인 네킹(Necking)이론을 적용하여 성형한계 를 구하도록 한다. 한편 슈링크 플랜징의 성형한계 해석을 위해서는 Wang과 Wenner 의 스트레치 플랜징에 대한 해석방법을 응용발전시켜 응력 및 변형도등을 계산하고 주 름현상해석을 위해서 Yu 및 Johnson이 도입했던 좌굴계수(Buckling Modulus)개념을 이 용하여 미소 각변위(angular displacement)동안 플랜지부에서 생기는 굽힘에너지와 소 성변형에너지를 비교하는 판별조건을 써서 슈링크 플랜징의 성형 한계를 해석하고자 한다.아울러 각 공정에서의 이론 해석결과들을 성형실험에서 얻어진 값들과 비교 검토하도록 한다.

• 소성∙가공
• /
• 제33권2호
• /
• pp.87-95
• /
• 2024

The current study aims to prove that high-speed forming has better formability than conventional low-speed forming. Experimentally, the quasi-static forming limit diagram was obtained by Nakajima test, and the dynamic forming limit diagram was measured by electrohydraulic forming. For the experiments, the LS-DYNA was used to create the optimal specimen for electrohydraulic forming. The strain measurement was performed using the ARGUS, and comparison of the forming limit diagrams confirmed that EHF showed better formability than quasi-static forming. Theoretically, the Marciniak-Kuczynski model was used to calculate the theoretical forming limit. Swift hardening function and Cowper Symonds model were applied to predict the forming limits in quasi-static and dynamic status numerically.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1107-1118
• /
• 2001

The forming limit diagram introduced by Keeler and Goodwin has been used generally to analyze the formability of sheet metal. However, path dependent forming limit curves based on the state of strain can be explained only by a single criterion which is based on the state. In this study, experimental forming limits in strain space of some metal sheets are transformed into forming limit curves in stress space. Effects of yield criterion are investigated in transforming the forming limit curves. Some important design aspects which are based on the close prediction of movements in forming limit curves during sheet forming are concluded.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.72-75
• /
• 1997

In this paper, the forming limits of laser welded blank sheets are introduced, obtained from a tensile test and a hemispherical dome punch test. Especially, the forming limit diagram(FLD) on the heat affected zone with a width 2.54mm is emphasized. Also, the experimental experiences in finding specific strain conditions are discussed.

• 소성∙가공
• /
• 제8권5호
• /
• pp.429-436
• /
• 1999

In sheet metal forming , forming limit diagram is very important to design and analyze of sheet metal forming process. Recently tailor welded blanks of different thickness and different material and strength combinations are used widely in automobile industry to reduce car manufacturing cost. In order to analyze the forming characteristics of tailored welded blanks, we have investigated the forming limit dia-grams for 3 kinds of different material using mash seam and laser welding experimentally and dis-cussed for the characteristics of forming for tailor welded blanks. It is concluded that forming limit dia-gram for the different material combination TWB locates between FLD of the thinner base material sheet and the thicker ones.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.58-61
• /
• 2002

A new concept of dieless sheet forming technology is proposed in this study to overcome the drawback of conventional dieless forming technology. For this purpose, dual points contact of the conventional punch system, which is a primary cause of surface defects, is replaced to single point contact using technology combined with fluid forming. It is expected that the advanced system may lead to easy displacement control of multi-punch elements, reducing surface defects, and increasing decision and forming limits. The reduced number of punch elements also saves the cost of the equipment. In addition, the new technology can be utilized for deep drawing as well as two- or three-dimensional curved surface forming, and thereby become multi-functional and multi-purpose differently from the conventional technology.