• Clinical and Experimental Pediatrics
• /
• 제54권11호
• /
• pp.443-455
• /
• 2011

Neonatal mortality rate (NMR) or infant mortality rate (IMR) are the rate of deaths per 1,000 live births at which babies of either less than four weeks or of one year of age die, respectively. The NMR and IMR are commonly accepted as a measure of the general health and well-being of a population. Korea's NMR and IMR fell significantly between 1993 and 2009 from 6.6 and 9.9 to 1.7 and 3.2, respectively. Common causes of infantile death in 2008 had decreased compared with those in 1996 such as other disorders originating in the perinatal period, congenital malformation of the heart, bacterial sepsis of newborns, disorders related to length of gestation and fetal growth, intra-uterine hypoxia, birth asphyxia. However, some other causes are on the increase, such as respiratory distress of newborn, other respiratory conditions originating in the perinatal period, other congenital malformation, diseases of the blood and blood-forming organs and certain disorders involving the immune mechanism. In this study, we provide basic data about changes of NMR and IMR and the causes of neonatal and infantile death from 1983 to 2009 in Korea.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.226-229
• /
• 2006

Process design has been performed for the warm hydroforming of light weight alloy tubes. For the heating of tubes, specially designed induction heating system has been adopted to ensure rapid heating of tubes. The induction heating system uses 30kHz frequency induction coil in order to concentrate the energy in the tube and prevent the energy loss. But the induced heat by the integrated heating system, consisting of induction coil, tube, pressure oil and dies, was normally not equally distributed over the length and circumference of the tube specimen, and consequent temperature distribution was non-uniform. So additional heating element has been inserted into the inside of the tube to maintain the forming temperature and reduce temperature drop due to heat loss to the molds. And for that heat loss, a heat insulation system has also been installed. The drop in flow stress at elevated temperatures results in lower internal pressure for hydroforming and lower clamping forces. The proposed warm hydroforming process has been successfully implemented when applying 6061 aluminum extruded tubes.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2000년도 학술대회지
• /
• pp.255-266
• /
• 2000

Since 1993, Seohae grand bridge has been continued construction for 7 years and will be completed late this year. The bridge is a part of west sea castal highway and consists of 3 types of bridge including precast segmental method, free cantilever method and cable stayed bridge. A cable stayed bridge is the core of this bridge and it consists of 5 span, symetrical cable-stayed bridge with a total length of 990 m. The main span between two H-shaped pylons extending approximately 180 M above massive foundation of a cable stayed bridge is 470 m long and an approach span of that is 260 m long respectively. The circular cofferdam with 16 ea of 25 m diameter flat type sheet pile had been applied to construct foundation. The slipform method had been applied for forming of con'c of two H-shaped pylons with 3 cross beams respectively which is varied horizontally and vertically. The deck has been erected with balanced cantilever method using movable derrick crane. The stay cables is a bundle of parallel individually protected, 7 wire high tensile strands. The strands is hot deep galvanized and sheathed with a tight high density polyethylene coating. A petroleum wax fills all the inter-wire voids. The bundle of strands to prevent from deterioration due to the ambient problem covered with high density polyethylene pipe. The Isotension method has been applied for the stressing of cable strands to ensure uniformity of force in all the strands of a syay and such works has been performed on the stay specially provided in the pylon.

• Transactions on Electrical and Electronic Materials
• /
• 제1권1호
• /
• pp.40-44
• /
• 2000

Metal-ferroelectric-insulator-semoiconductor field effect transistor (MFISFETs) were fabricated using CMOS processes. The Pt/SBT/NO combined layers were etched for forming a conformal gate by using Ti/Cr metal masks and a two step etching method, By the method, we were able to fabricate a small-sized gate with the dimension of $16/4{\mu}textrm{m}$ in the width/length of gate. It has been chosen the non-self aligned source and drain implantation process, We have deposited inter-layer dielectrics(ILD) by low pressure chemical vapor deposition(LPCVD) at $380^{circ}C$ after etching the gate structure and the threshold voltage of p-channel MFISFETs were about 1.0 and -2.1V, respectively. It was also observed that the current difference between the $I_{ON}$(on current) and $I_{OFF}$(off current) that is very important in sensing margin, is more that 100 times in $I_{D}-V_{G}$ hysteresis curve.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.503-508
• /
• 2010

$Eu^{2+}$-doped $\beta$-SiAlONs ($Si_{6-z}Al_zO_zN_{8-z}:Eu_y$) are recognized as promising phosphor materials to build an white LED for lighting application due to its excellent absorption/emission efficiency in the long wave length region. In this research, the fabrication of $\beta$-SiAlON:Eu plate phosphor by sintering was investigated with fixed Eu content(y) and varied composition of the host lattice(z). The addition of the activator $Eu_2O_3$ lead to enhanced densification by forming the transient liquid phase. The refinement of a composition by the calculated lattice parameter indicated that the measured composition of the fabricated specimens is nearly same to that of designed one. The single phase $\beta$-SiAlON:Eu plate with relative density of 96.4% was achieved by addition of 2 wt% CaO, which implies the possibility of full densification by adjusting the processing variables.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.157-163
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ration cause decrease of joining efficiency after of GMT-Sheet, joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We have better design the structure so as not occur to stress centralization on the joining part.

• 천문학회보
• /
• 제37권1호
• /
• pp.39.1-39.1
• /
• 2012

Nuclear rings in barred galaxies are sites of active star formation (SF). We investigate SF and its feedback effects occurring in barred galaxies, for the first time, using high-resolution grid-based hydrodynamic simulations. The gaseous medium is assumed to be infinitesimally thin, isothermal, and unmagnetized. The SF recipes include a density threshold corresponding to the Jeans condition, a SF efficiency of 1%, and momentum feedback via Type II supernova events together with stellar-wind mass loss. To investigate various environments, we vary the gas sound speed as well as the efficiency of momentum injection in the in-plane direction. We find that when the sound speed is small, the surface density of a ring becomes largely independent of the azimuthal angle, resulting in star-forming regions distributed over the whole length of the ring. When the sound speed is large, on the other hand, the ring achieves the largest density at the contact points between the dust lanes and the ring where SF occurs preferentially, leading to a clear age gradient of star clusters in the azimuthal direction. Since rings shrink with time, a radial age gradient of star clusters naturally develop regardless of sound speed, consistent with observations. SF persists over 200 Myr, with an average rate of ${\sim}1.3M_{\odot}/yr$ similar to observed values. Rings gradually become hostile to SF as they lose gas into stars and turbulent motions dominate.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.19-23
• /
• 2005

To minimize the weld defect in manufacturing of the welded tube by using $CO_2$ laser, the monitoring of the welding quality and the seam tracking along the butt-joint lengthwise to the tube axis are studied. The longitudinal butt-joint is shaped from $60kgf/mm^2$ grade steel sheet by 2 roll bending method, and welded by the $CO_2$ laser welding system equipped with the seam tracker and plasma sensor. The laser welded tube has the thickness of 1.5mm, diameter of 105.4mm and length of 2000mm. The precise positioning of the laser beam on the butt-joint to be assembled is obtained within $200{\mu}m$ by the laser vision sensor. The artificial defects in the butt-joint are well observed by the signal of plasma intensity measured from the plasma sensor of UV wavelength range within 400nm. The developed $CO_2$ laser tube welding system has the function of the precision seam tracking and the real-time monitoring of the welding quality. In conclusion, the laser welded tube can be used for manufacturing of automobile chassis and components after hydro-forming.

• The Plant Pathology Journal
• /
• 제15권6호
• /
• pp.345-347
• /
• 1999

A scab disease on eggplant (Solanum melongena L. cv. Chukyang) in plastic film houses around Kimhae area in Korea during the winter season of 0998-1999. The disease started on leaves with small dark brown spots which were gradually expanded to 1 to 3 mm diameter lesions. Later, the central parts of the lesions became collapsed and detached to make holes. Dark brown mold was grown out of the lesions on the lower side of leaf. Numerous conidia were produced on the lower side of leaf. Numerous conidia were produced on the diseased leaves and appeared to be readily dispersed in the air. A fungus was isolated from the diseased leaves, and tested for Koch's postulates to prove the causal agent of the desease. The isolated fungus grew on potato dextrose agar, forming greenish black to pale brown colonies. Conidia were ellipsoidal, fusiform or subspherical, mostly one-celled but occasionally septated, and formed in long branched chains on the erected conidiophores which were pale olevaceous brown and variable in length between 12.4 and $393.4\mu\textrm{g}$. The fungus was identified as Cladosporium cucumerinum Ellis Arthur based on the above morphological characteristics examined. The optimum temperature for mycelial growth and conidial formation was about 20 to $25^{\circ}$. In addition to cucumber, the fungus was also pathogenic to watermelon, pumpkin and oriental melon. This is the first report on the scab disease of eggplant in Korea.

• Applied Microscopy
• /
• 제43권2호
• /
• pp.75-80
• /
• 2013

The morphological features of pollen grains collected from the broad-leaved and cylindrical-leaved Portulaca species of the Hawaiian Islands were investigated. The variation in size and surface pattern were examined using scanning electron microscopy and statistical analysis. Pollens of the Portulaca were apolar grains of monads exhibiting apertures, colpi, and relatively thin echini. Of particular interest was the differing size of pollen grains among the species studied. Pollens of the broad-leaved Portulaca were considerable in size with a length of about $73{\sim}86{\mu}m$, while the cylindrical-leaved Portulaca tended to have smaller pollen grains ranging from 50~65 in diameter. The smallest pollens were found in cultivar 2 having an average of $43{\mu}m$. The pollen was intectate, and the exine surface appeared granulous, having sculptured elements of spinules and puncta. Two types of puncta were discerned; one forming an operculum, and the other, a simple perforation. Numerous spinules and small puncta were found throughout the cylindrical-leaved Portulaca. In the present study, morphological features of pollen grains from ten Hawaiian Portulaca species, including endemic and unknown taxa, revealed the aforementioned pattern of variation. This paper aim to provide morphological information that could be of phylogenetic value within the Hawaiian Portulaca.