• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.1023-1023
• /
• 2004

• 한국초지조사료학회지
• /
• 제16권2호
• /
• pp.155-160
• /
• 1996

Spring sown oat crops were grown during early March to late June in 1993~1994. The crops were harvested at different stage of maturity to determine the yield performance, chemical components and net energy value of the plants for silage utilization. The pattern of dry matter accumulation, absolute growth rate(Abs. GR), leaf weight ratio(LWR), stalk diameter(SD) and other growth parameters were analysed to evaluate the suitability of the plant materials for ensiling. The effect5 of wilting treatment and formic acid addition on the quality of silage was also disscused during the experiments. Spring sown oat crops was evaluated as a suitable materials for whole plant silage making. The best qualitative oat silage was obtained at the stage of soti dough to hard dough, when the plant reached 32.2~35.7% in dry matter concentration. Spring sown oat produced 9.43 ton in DM basis, 5.79 ton in TDN and 57.550 MJ-NEL/ha in net energy lactation. Early harvesting of the oat corps needed wilting treatment of the material before ensiling. Under pre-witing treatment (1/2 day) and formic acid addition(0.3%) silage quality point of oat crops harvested at the bloom stage was improved from 58 to 84 point.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.10-17
• /
• 2007

Chitosan(CS) and cellulose acetate(CA) composite films were prepared using formic acid as a cosolvent by casting, solvent evaporating and neutralization method. This study examines if the blending method, which uses formic acid as a cosolvent is efficient in improving the mechanical properties of CS film, especially wet strength and elongation. Formic acid is an effective cosolvent for the blend of CS and CA. Under wet condition, tensile strength and elongation of the composite films were obviously higher than those of the films made from pure CS. FTIR, DSC, and X-ray diffraction showed that the composite films exhibit a high level of compatibility and that strong interaction between the CS and CA was caused by intermolecular hydrogen bonding. The affinity series of composite film to transition metal ions are Cu(II) > Cd(II) > Cr(III). The adsorption of Cu((II) ion was shown to be highly pH sensitive.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.10-18
• /
• 2010

Controlled electrodeposition of dendritic nano-structured gold-platinum (AuPt) alloy onto an electrochemically pretreated carbon paper substrate was conducted in an attempt to improve catalyst utilization and to secure an electronic percolation network toward formic acid (FA) fuel cell application. The AuPt catalysts were obtained by potentiostatic deposition. AuPt catalysts synthesized as bimetallic alloys with 60% Au content exhibited the highest catalytic activity towards formic acid electro-oxidation. The origin of this high activity and the role of Au were evaluated, in particular, by XPS analysis. Polarization and stability measurements with 1 mg $cm^{-2}$ AuPt catalyst (only 0.4 mg $cm^{-2}$ Pt) showed 52 mW $cm^{-2}$ and sustainable performance using 3M formic acid and dry air at $40^{\circ}C$.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권5호
• /
• pp.347-351
• /
• 2001

A study was made on the extraction equilibria of succinic and formic acids from aqueous solutions using tri-n-octylamine (TOA) in 1-octanol. It was shown that the loading values of TOA decreased with increasing pH values. The apparent equilibrium constants for each acidamine complex were determined by an equilibrium model. In the case succinic acid, the formation of a bisuccinate anion played an important role in the stoichiometry of the acid-amine complex.

• 전기화학회지
• /
• 제16권2호
• /
• pp.74-80
• /
• 2013

세 가지 종류의 카복실산(포름산, 아세트산, 프로피온산) 용액 하에서 양극산화 반응을 통한 나노 다공성 금(nanoporous gold, NPG) 구조의 형성과 NPG 전극 표면 상의 전기화학적 글루코오스 산화반응을 관찰하였다. 세 가지 카복실산 용액 조건 중에서 포름산 용액 조건하의 양극산화를 통해 형성된 NPG 전극에서 글루코오스의 산화 활성이 가장 우수하였다. 포름산 용액 조건하의 양극산화 과정에서 가장 우수한 글루코오스 산화 활성을 얻기 위한 최적 조건은 인가전위 5.0 V와 반응시간 4시간이었다. 카복실산 용액 하에서 형성된 NPG 상의 전기화학적 글루코오스 산화 활성을 염소이온의 부재 및 존재 하 조건에서 관찰하고, 이를 옥살산 용액 하에서 형성된 NPG 상의 거동과 비교 분석하였다. 포름산 용액 하에서 최적 조건으로 형성된 NPG 전극상에서 글루코오스의 전류법 검출 응용을 제시하였다.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.690-694
• /
• 2015

최근에 직접 액체 연료전지 중에서 직접 개미산 연료전지(Direct Formic Acid Fuel Cells, DFAFC)가 활발히 연구되고 있다. 불소계막을 대신할 저가의 탄화수소막이 DFAFC막으로 주목받고 있다. 본 연구에서는 sulfonated poly(ether ether ketone ketone, sPEEK)막과 Poly(arylene ether sulfone)(PAES)막을 사용해 Nafion 막과 그 특성을 DFAFC 조건에서 비교하였다. 탄화수소계막의 개미산 투과 전류밀도가 $240{\sim}250mA/cm^2$로 불소계인 Nafion 211 막의 $600mA/cm^2$보다 낮았다. sPEEK MEA(Membrane and Electrode Assembly)와 Nafion 211 MEA의 막 저항이 서로 비슷해 I-V 성능도 거의 같았다. 개미산 투과도가 낮은 sPEEK MEA가 Nafion 211 MEA보다 안정함을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.227-233
• /
• 2015

In this study, we evaluate catalytic activity of Pd/C catalyst that is synthesized by modified polyol method. With such formed Pd/C is used as anodic catalyst for direct formic acid fuel cell (DFAFC) and performances of the DFAFC are measured to verify whether the new catalyst is effective for enhancing DFAFC performance and to determine optimal loadings of the Pd/C needed for obtaining best DFAFC performance. Pd particle distribution of the Pd/C catalyst is analyzed by TEM, while its catalytic activity is estimated by using cyclic voltammogram (CV) as measuring formic acid oxidation reaction and active surface area. As a result of that, the Pd/C catalyst synthesized by modified polyol shows better catalytic activity and DFAFC performance with small loading amount of Pd/C. When loading amount of Pd/C is $1.5mgcm^{-2}$, maximum power density of DFAFC adopting the catalyst is $122mWcm^{-2}$.

• 한국가스학회지
• /
• 제17권6호
• /
• pp.67-72
• /
• 2013

인화점은 공기와 섞인 가연성 증기의 농도가 발화하기에 충분할 때의 최저 온도로, 가연성 액체 용액의 화재 및 폭발 위험성을 분석하는데 사용되는 주된 물리적 특성치이다. 단일 성분의 인화점 정보는 여러 문헌에서 얻을 수 있으나, 가연성 이성분계 혼합물의 인화점은 충분히 제공되어 있지 않다. 본 연구의 목적은 이성분계 가연성 액체 혼합물인 아세트산-포름산계의 인화점을 측정하고, 산출하는 것이다. 인화점 측정은 Cleveland 개방식 장치를 사용하였고, 실험값은 van Laar 식과 Wilson 식을 활용한 최적화 기법에 의해 산출된 값과 비교하였다. 그리고 라울의 법칙에 의해 산출된 값과 비교되었다. 그 결과, 최적화 기법에 의한 산출값이 Rauolt의 법칙에 의한 산출값보다 실험값에 보다 근접하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.831-833
• /
• 2008

150 nm thick Ga-doped ZnO thin film, which was deposited by a sputtering process, was wet-chemically etched by using various organic acids such as oxalic, citric and formic acid. Wet etch parameters including etchant concentration and temperature are investigated for each etchant, and their effects on the etch rate and the feature of edge line are compared.