• ETRI Journal
• /
• v.34 no.1
• /
• pp.35-43
• /
• 2012

This paper presents a delay-locked-loop-based clock and data recovery (CDR) circuit design with a nB(n+2)B data formatting scheme for a high-speed serial display interface. The nB(n+2)B data is formatted by inserting a '01' clock information pattern in every piece of N-bit data. The proposed CDR recovers clock and data in 1:10 demultiplexed form without an external reference clock. To validate the feasibility of the scheme, a 1.7-Gbps CDR based on the proposed scheme is designed, simulated, and fabricated. Input data patterns were formatted as 10B12B for a high-performance display interface. The proposed CDR consumes approximately 8 mA under a 3.3-V power supply using a 0.35-${\mu}m$ CMOS process and the measured peak-to-peak jitter of the recovered clock is 44 ps.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.95-98
• /
• 2004

In this paper, the hardware design of a transmission convergence sublayer(TC) for boradband wireless access system is described, which performs (1) formatting TC PDUs to MAC PDUs, (2) RS encoding/decoding, (3) providing various control signal to PHY modem. The TC hardware has been designed in VHDL, and successfully synthesized in an FPGA chip.

• Communications of Mathematical Education
• /
• v.19 no.4 s.24
• /
• pp.823-837
• /
• 2005

[ $T_EX$ ] is a typesetting system created by Donald E. Knuth for producing publication-quality scientific books and journals. It is famous for the line breaking algorithm, the formatting of complex mathematical formula, and the powerful macro programming capability. Recently $T_EX$ plays a new role of an automatic typesetting engine. The paper describes $T_EX$ in the framework of typography by comparing with DTP softwares and word processors.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.386-388
• /
• 2007

IC 의 발명이후 컴퓨터는 급속도로 발전하게 되었다. 불과 몇십년 사이에 컴퓨터의 처리능력은 수만,수억배 증가했고, 사회환경 또한 정보기반사회로 변화하게 되었다.본 논문은 이에 기반하여 유비쿼터스 환경의 새로운 구축환경을 모색하고, 본 연구 프로젝트의 실험 및 결과를 통하여 이를 입증하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3377-3378
• /
• 2013

The APJCP Impact Factor for 2012 is 1.271, returning from 0.659 for 2011 (1.240 for 2010 and 1.108 for 2009). For an Asian Pacific journal publishing over 100 papers a month from countries with very varied resources it is heartening and we thank all those who continued to submit papers and cite references in the APJCP through our difficult period. However, we still have very much room for improvement. As Chief Editors it is our shared responsibility to act for the benefit of the cancer control research community who utilize the journal in our region of over four billion people and provide a prestigious forum for publication of research findings which can be freely shared by all. The motivation for the APOCP/APJCP has never been financial profit but a firm financial base is nevertheless essential. Although we have kind support from the Korean National Cancer Center for our Managing Editor and the website, our ability to maintain our Chinese and Thai offices is totally dependent on the processing charges paid by the authors. In order to expand our staff to cope with increased submissions and provide greater assistance in ensuring comprehensive reference coverage and dissemination of findings published in the APJCP to the worldwide research community, a joint decision has been made to increase formatting charges by 50% from July. We ask for author understanding. In addition, we appeal to scientists to positively consider our requests to make their reference lists as comprehensive as possible, including papers from the APJCP where appropriate. The future of the journal and the APOCP is largely in your own hands.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.559-568
• /
• 2014

In this age of multimedia, the content of media works as an important factor rather than the format of media. Popular television programs are being supplied cross-border and they go through the process of adaption to the local viewers which is called "formatting". This kind of "formatting" industry had begun in the States, then the Europeans have taken the inactive from 1990s. Since then, it has been settled firmly by the "super-formats". It now has the assumed value of 31 hundred million Euro per year. Especially after 2000s, England has been the center of world broadcasting format industry, and its case has lots of suggestions to Koreans trying to foster the cultural content industry. So this study aims to find the suggestions to Korean content industry by considering the history of broadcast format industry chronically and examining the industrial background of English as a powerful nation of content.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.1
• /
• pp.45-51
• /
• 1989

In metal cutting various types of chips are produced in consequence of cutting conditions. According to the type of chips the cutting mechanism is to be changed. Most of the cutting theory is based on the continuous chip because of its convenient analysis, but the occurrence of the saw-toothed chip depends upon the workpiece and/or the cutting conditions, one of which is titanium alloy used widely. Nowadays titanium alloys are used widely with the rapid development of aerospace structural engineering application, whereas the theory of cutting mechanism has not been established yet, and the formatting process has not been understood satisfactorily, either. Unfortunately several misconceptions, conflicting statements and statements needing further clarifi- cation are also found. In this paper an attempt is made to clarify the formation process of saw-toothed chips which are to be produced during the orthogonal cutting process of titanium alloys. They were machined at low speed to avoid the rapid tool wear. We observed the SEM-photographs of chips taken at the quick-st- opping device. It is hoped that a rational model of the mechanics of cyclic chip formation can be developed. The results obtained are as follows. 1. When a saw- toothed chip is formed, the shear band begins at the primary shear zone and trans- fers to the free surface, so that a segment is produced and it is completed by upsetting between the formatting segment and the formatted segment. 2. As the rake angle or the clearance angle increases in the machining of the titanium alloy, the chip approaches to that of the continous type. 3. When the rake angle and the clearance angle are increased the shear energy and the unit friction energy decrease, which shows the same aspect as that of the continuous chip.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.7 no.2
• /
• pp.107-122
• /
• 1997

Most of the currently used electronic mail system has the threat of security such as illegal leak of message, forgery, uncertain identity, denial of sending and receiving, and so forth. The security for this system is not satisfied yet, thus we explore these problems. In this thesis, we implement the security services for internet mail system which cover the weakness for traditional mail system. This system provides not only security services which PEM and PGP provides (i.e message confidentiality, message integrity, originator authentication, non-repudiation of origin), but also message replay prevention. and non-denial of recipient using certification of contents. In addition, this system increases security of the digital signature by signing with signature block formatting on the creation of it. And it increases security of the digital enveloping by encrypting with encryption block formatting of message encryption key.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.4
• /
• pp.181-186
• /
• 2009

This paper presents an efficient synchronizer architecture using a common autocorrelator for Digital Video Broadcasting via Satellite, Second generation (DVB-S2). To achieve the required performance under the worst channel condition and to implement the efficient H/W resource utilization of functional synchronization blocks, we propose a new efficient common autocorrelator structure. The proposed architecture can decrease about 92% of multipliers and 81% of adders compared with the direct implementation. Moreover, the proposed architecture has been thoroughly verified in XilinxTM Virtex IV and R&STM SFU (Signaling and Formatting Unit) broad-cast test equipment.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.550-553
• /
• 2005

To acquire radar target signature, various kinds of target are necessary. Measurement is one of the data acquiring method, but much time and high cost is required to get the target data from the real targets. Even if we can afford that, the targets we can access are very limited. To obtain target signatures avoiding these problems, we build the target CAD (Computer Aided Design) model for the calculation of target signatures. To speed up RCS calculation, we applied adaptive super-sampling and tested quite complex tank CAD model which is 1.4 hundred of thousands facet. We use calculated RCS data for ID range profile and 2D ISAR (Inverse Synthetic Aperture Radar) image formation. We adopted IFFT (Inverse Fast Fourier Transform) algorithm combined with polar formatting algorithm for the ISAR imaging. We could confirm the possibility of the construction of database from the images of CAD models for target classification applications.