• Journal of Pharmaceutical Investigation
• /
• 제41권6호
• /
• pp.371-376
• /
• 2011

The objective of this work was to investigate the existence of new crystal forms of tulobuterol which is used to prevent morning asthma attacks by ${\beta}_2$ agonist and the transformation of crystal forms. Three crystal forms of tulobuterol have been isolated by recrystallization and Form 2 was transformed to Form 4 at 52% RH and 95% RH and these four crystal forms are characterized by differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD) and thermogravimetric analysis (TG). The DSC and PXRD patterns of four crystal forms of tulobuterol were different respectively. The dissolution patterns of these three crystal forms of tulobuterol were studied and they showed significant differences in the dissolution rate. After storage of 2 months at 0% RH (silica gel, $20^{\circ}C$), 52% RH (saturated solution of $Na_2Cr_2O_7{\cdot}2H_2O/20^{\circ}C$) and 95% RH (saturated solution of $Na_2HPO_4/20^{\circ}C$), Form 1 and Form 3 were not transformed. But Form 2 was transformed to Form 4 at 52% RH and 95% RH.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.25-26
• /
• 2023

Free-form buildings serve as landmarks, and interest and demand are increasing. However, in the case of free-form concrete members, different curved surfaces are required depending on the location where they are used, and the formwork is custom-made and used. Concrete is poured into the manufactured formwork to produce FCP (Free-form Concrete Panel). However, since it is an atypical building that requires precise curvature, compaction cannot be performed after concrete is poured. This leads to the occurrence of bughole, which reduce the strength and aesthetics of concrete. Therefore, in this study, we intend to conduct basic experiments to develop a magnetic compaction device that can be used for FCP. As a result of the experiment, it was confirmed that the bug hole was improved when the magnetic compaction device was applied, and there was no significant difference in compressive strength and flexural strength. This technology can be used in the field of Free-form concrete where it is difficult to perform compaction work, and it is expected to be used as a basic research related to technology for new automatic compaction.

• 디자인학연구
• /
• 제20권
• /
• pp.99-109
• /
• 1997

바우하우스운동은 하나의 디자인 관이 전제되어 일관성 있게 진행되었다 기보다는 소위 근대와 반 근대의 끊임없는 갈등 속에서도 구성원들의 일관된 삶의 방식을 통하여 추구된 조형작업의 부산물이라 할 수 있다. 따라서 현대디자인의 근원을 형성하는데 기여했던 바우하우스 교육의 모든 기구는 학생이 모든 내적, 외적 곤란을 극복하는 시점에서의 실제문제와 관계 있는 교유 가치를 실현하는데 있었으며 교육과 생산이 하나의 시스템 속에서 가장 효율적으로 운영될 수 있는 최소단위로서의 작업공방이 필연적으로 생겨나게 된 것이다. 바우하우스 공방작업의 가장 본질적인 점은 시간이 지나면서 모든 제품이 균질성을 나타낸다고 하는 사실이며 이것은 각양각색의 인격과 개성의 협력을 바탕으로 삼아 의식적으로 발달한 공동체 정신의 결과로서 나타난 것이었다. 또한 이 균질성은 외견상에 나타난 양식 적인 세세한 면에 있는 것이 아니라 사물을 간결하고 충실하게, 한편으로는 본질적인 법칙에 응해서 만들어 낸 노력에 기초하고 있다. 따라서 바우하우스 제품의 원형은 유행적인 것이 아니라 예술, 기술, 경제에 따른 형태 부여라는 점에서 수많은 사고와 심사숙고를 거친 공방 작업과정의 결정체라고 볼 수 있다.

• 한국농촌건축학회논문집
• /
• 제8권1호
• /
• pp.33-42
• /
• 2006

The rice mill occurred from modernization process of the farming village. It comes to follow in intention of the architect and is not the position building. By the user of the building it comes to follow necessary and it is a position thing. The like this rice mill was the community center of the village. Also the material which is unique and form quality were land mark of the village. The object of research is the rice mill where it takes charge of a like this role. And the scope of research is 8 rice mills of Eomjeong Myeon Chungju City which is located in the northern Chungbuk area. The progress of research the documentary survey, actual measurement, question, field work it analyzed the construction quality which the rice mill keeps with base and it arranges. The results of study are follows; 1. conditions of location : The rice mill the entrance of the village, the crossroads system is formed most the place is doing in the place which well. 2. The inside composition of a space : In order to compose the work space and the store space efficiently the plane surface is doing a rectangular form. 3. Form of roof : The roof raises the efficient characteristic of the work where is not the design which is intended to be naturally formed from the space composition for. 4. Selection of material : Most it was a natural enemy and an utility, it selected the scientific material and it used.

• 한국건설관리학회논문집
• /
• 제13권1호
• /
• pp.44-52
• /
• 2012

합리적인 방법에 의해 결정된 건설 공사비를 포함하여 계약을 체결하는 것은 공공 건설공사의 사업비 관리 측면에서 매우 중요하다. 국내에서는 건설 공사비를 산정하는 기준으로 표준품셈이 사용되고 있지만, 표준품셈에서 제시하는 품의 적정성에 대해서 문제가 제기되고 있으며, 현장의 자원 투입량과 품셈에서 제시하는 자원 투입량의 차이로 합리적이고 효율적인 공사비를 산정하는데 어려움이 있다. 본 연구에서는 건설 공사비를 합리적으로 산정하기 위하여, 공동주택 거푸집 공사의 생산성 분석을 통한 작업조 기반의 Cost Data Prototype을 제시하였다. 특히, CYCLONE 모델은 민감도 분석을 통해 최적의 작업인원을 제시하는 모델이므로, 거푸집 공사의 다양한 작업공간과 작업인원을 대상으로 생산성을 분석할 수 있는 도구로 활용이 가능하다. 그리고 개발된 회귀식은 거푸집 공사의 작업인원을 독립변수로 하여, 필요한 작업량을 종속변수로 예측하는데 활용이 가능할 것이다.

• 대한조선학회지
• /
• 제11권1호
• /
• pp.9-16
• /
• 1974

To contribute towards more accurate estimation of the virtual inertia coefficient for the horizontal vibration of ships, three dimensional correction factor $J_H$ for the added mass of finitely long elliptic prismatic bars in horizontal vibration in a free surface of an ideal fluid are calculated. In the problem formulation Dr. T. Kumai's quasi-finite length concept[1,11,12] is employed. Now that, in Dr. Kumai's work[1] for the horizontal vibration the mathematical model was a circular cylinder, the principal aim of the authors' work is to investigate the influence of the beam-draft ratio B/T on $J_H$. The numerical results of this work are shown in Fig.3 graphically, from which we may recognize that the influence of B/T on $J_H$ is remarkable as much as that of the length-draft ratio L/T(refer to Fig.1 also). In Fig.3 the curves for B/T=2.00 are of those based on Dr. Kumai's result[1]. On the other hand, the experimental data obtained by Burril et al.[9] for the horizontal vibration of finitely long prismatic bars of various cross-section shapes are compared with the theoretical added mass coefficients defined by combination of the authors' $J_H$ from Fig.3 and two dimensional coefficients $C_H$ obtained by Lewis form approximation for the corresponding sections. They are in reasonable correspondence with each other as shown in Fig.2. Finally, considering that the longitudinal profile of full-form ship's hull is well resembled to that of an elliptic cylinder and that the influences of other factors such as the sectional area coefficient and the shape of section contour itself can be well merged in the two dimensional added mass coefficient, the authors recommend that the data given in Fig.3 may be successfully adopted for the three dimensional correction factor the added mass in the horizontal vibration of hull-form ships.

• 한국직업건강간호학회지
• /
• 제18권2호
• /
• pp.205-218
• /
• 2009

Purpose: The purpose of this study was to learn the affective factors of case managers' occupational stress. Method: A total of 986 participants responded to a self-administered questionnaire that included 24 items of Korean Occupational Stress Questionnaire Short Form (KOSQSF), job satisfaction index, health behaviors, general characteristics, and variables related to work. The data collection of research was done from 17th to 21th of September, 2007. The data were analysed by t-test, ANOVA, and multiple regression with SPSS 11.1 package program. Result: The results of this study were as follows: The overall job satisfaction rate of men and women was highly than that of the Korean worker's standard. There were statistically significant differences in occupational stress in work place, work department, work position, smoking, treatment in out-patient clinic, subjective & relative health-status, work load, supervisor's review on work-ability, and job satisfaction. According to the multi-variate analysis, occupational stress(47.6%) was related to job satisfaction, workload, individual work-ability, supervisor's review on work-ability, health status and gender. Conclusion: Occupational stress varied depending on the ten variables and was influenced by job satisfaction(35.7%) and 5 other variables. The results suggest that further follow-up study on case managers is necessary to relieve their occupational stress.

• 소성∙가공
• /
• 제8권4호
• /
• pp.356-363
• /
• 1999

This paper discusses some techniques for the determination of optimum blank size and pre-form design for multi-stepped deep drawing of oval shell. The deep drawing process of oval shape has been regarded as more difficult than that of cylindrical shell because of its complicated behavior of plastic deformation. But there is insufficient information in this area to carry out successful deep drawing work of irregular products such as oval, rectangular, and square shapes. In order to find the optimum conditions, the drawing apparatus for two kinds of pre-form design are built, a series of drawing experiments performed, and thickness stain distributions measured. From the results of thess suggested experiments, various optimum process variables are observed and discussed.

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.10-15
• /
• 2005

For the development of compensation machining program, ultra precision grinding used in ultra precision machine and corrective machining was studied. We explored a new rough grinding technique on optical material such as zerodur. The facility used is a polishing machine with a custom grinding module and a range of diamond resin bond wheel. Surface roughness and form accuracy are measured by surface measurement equipment(Form Talysurf series2). Our compensation machining program has complied with a target of producing surface roughness better than $0.05{\mu}m$ Ra and form accuracy of around $0.05{\mu}m$ Rt and has been unveiled as a work-hour model.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.166-173
• /
• 1997

The present problem of this country building market in the face of 3D, in addition to a rise in construction cost, materials problems and opening a building market to foreign countries, is finding the efficient ways of overcoming these problems. So the efficacy of form work in technical improvement becomes important through scientific methods of the design and construction as advancement in th study of strength for Permanent form mortar is possible. According to the increment of polymer-cement ration, the degree of bending strength and compressive strength and impact strength increases. The optimum volume content of glass fiber seemed to be about 2.5% considering the distribution of glass fiber, workability and economy.