• Journal of the Korea Institute of Building Construction
• /
• v.1 no.1
• /
• pp.143-150
• /
• 2001

Permanent-Form is one of system forms for reducing human labor, work costs, oscillation, noise, construction wastes and so on. Permanent-Form is made from precast method in facilities, and carried in construction site to assemble with no demolding. The biggest expense to produce permanent-Form is about manufacturing mold. This papers about structural efficiency evaluation, construction efficiency test. The result of this study is below. (1) In the compressive strength test of column. Fly ash specimen and polymer specimen's strength developed as each 8%, 14% to comparison with standard specimen. The reason of this result from form section area increase and form's reinforcing bar (2) The Degree of column crack in permanent form is lower than another one's The glass fiber's fiber reinforcement effect brings like this. (3) In the flexural load test of beam, the early crack load and maximum load of permanent form use specimen showed 20% higher than standard specimen's. (4) In field application experiment, an constructional error is satisfied with the allowable margin of error, $\pm$5mm (5) When the concrete is placed into the form inside, The transformation degree of permanent form is lower than plywood form's. (6) The concrete packing ability of permanent form is satisfactory. (7) The bonding strength of permanent form shows enough strength - 6kgf/$\textrm{cm}^2$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.626-636
• /
• 2004

The purpose of this study was to show a theoretical system of expressional area, the characteristics and the effects which is applied to fashion illustration by metaphor theory. The theoretical system of expressional area was analyzed by category analysis and 150 fashion illustrations from 1900 to 1999 were analyzed by contents analysis. The results of this study were as follows: Metaphor in fashion illustration was categorized to replacement, parody, heterogeneous combination, surrealism, magnification and reduction of size, optical illusion, juxtaposition and distortion of form. In detail, First, replacement was showed omission of form, non-object color, texture. Second, parody was showed using the part in artistic work, differentiation of original work. Third, heterogeneous combination was showed unreal body combining between animal and plant. Fourth, surrealism was showed creation of object which is impossible to present. Fifth, magnification and reduction of size was showed bizarre magnification of part of body, size of clothing. Sixth, optical illusion was showed ambiguity of object because of creation of new form. Seventh, juxtaposition was showed the parallel of contradicting idea and change of meaning between heterogeneous objects. Eighth, the distortion of form was showed grotesque distortion of part of body and disgusting object.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.121-122
• /
• 2015

The demand on free-form buildings is gradually increasing, but there are several problems such as increased cost and construction duration, and decreased constructability at the construction phase upon construction of a building owing to the difficulty of member production-installation. To solve these problems, a technology to produce FCP using a CNC machine was developed. Basically, it delivers the information on a free-form building designed to the CNC machine, the shapes of RTM and PCM are created using the information delivered and FCP are produced with the RTM and PCM which act as forms. Since the construction duration and project cost are limited on site, the efficiency of FCP production-installation is significant for application of the technology. For it is almost impossible to change the production-installation layout and process once they are set in the construction phase, they should be carefully determined. Before the production-installation layout are established, it is necessary to analyze the factors that influence the duration. Thus, the study intends to analyze influence factors in PCM mold on estimation of the production-installation duration for FCP. According to the analysis of influence factors, a simulation model for estimation of the duration that changes depending on the constraint conditions can be built.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.3
• /
• pp.97-104
• /
• 2000

Studies on the principle of traditional moulding techniques of architecture or structure are very important in the point of the work could accomplish succession to modern design. As an attempt of these work, this study tried to examine traditional moulding techniques applied in planes of ancient architecture and structure closely. The major findings of this study are summarized as follows; It was verified that planes of ancient Korean architectures and structures analyzed in this study was moulded by its multiple partitions with the six or eight partitions of circumference as the fundamental form. The well unearthed in kyong-bok palace recently was moulded by a concentric circle assumed form of 4 circle which was extended with equal interval and divided into multiple of 8 partition of circumference. Chon-duk-jung in chang-duk palace also was moulded by a concentric circle assumed form of 3 circle extended with equal interval, but circle were divide by 6 partitions. It was also found that 6$^{\circ}$§8 partitions of circumference(or its multiple partition) was applied to not only above structures but also the moulding planes of ancient architecture, and as a results, figures revealed in architectures analyzed is classified into three classes. And, this study analyzed arrangements of two temples. As a results, it is discovered that the Grid used in moulding planes of each building fixed the arrangement of buildings. Therefore, moulding by equal partition of circumference decided the form of each building and the relation of element at the same time.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.5-7
• /
• 2012

Repeated using carpentry workers work at working tools because of occupational low back pain, such as musculoskeletal disorders, occupational diseases are on the rise. For this purpose, through the analysis of musculoskeletal disorders and work tools and studies are underway to improve the working conditions of the workers. However, existing previous studies may not reflect the working tools used for carpentry worker dies when working at a construction site that Therefore, in this study, the work in the form of construction, one of the jobs of worker dies classified according to the working tools of musculoskeletal disorders correlated to analyze. The results of this study are as follows. working tools of a total of seven different dies used in the installation process. Musculoskeletal disorders, waist / drill such correlation was very strong. Also showed that a total of three of the tools used in the formwork dismantling cutter musculoskeletal disorders of the arm / elbow and a very strong correlation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.74-80
• /
• 1999

Recently, manufacturing work has been transformed to small scale production form with various types to act up to user's expectation from mass production with a little items required in the past. Then FMS using NC type machinaries has been applied actively also in domestic manufacturing line to meet thus tendency, but there are many machining troubles occured during work process not be settled yet. Nowdays high efficiently has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advance FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigate the machining condition in grinding process. As results form this experimental study, it is recognized well that grinding conditions and dressing point of in time cab be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.154-155
• /
• 2016

Although there is an increase in demand for free-form buildings, there are several problems such as increased cost and duration and decreased constructability arising from difficult member production and installation. To solve these problems, a technology to produce free-form panels using CNC machine was developed. According to the technology, the information on free-form buildings designed is delivered to the CNC machine, a form is shaped using the delivered information and free-form concrete panels are produced using the form. The limited construction site, duration and project cost as well as interferences with other work types should be considered upon in-situ production of free-form concrete panels. Thus, the purpose of this study is to conduct a base study on in-situ production layout of free-form concrete panels by system dynamics. With this study, we will discover the causal relationship of influence factors on in-situ production of free-form concrete panels, and improved productivity is expected through the production layout.

• Korean Architects
• /
• s.514
• /
• pp.60-63
• /
• 2012

• Journal of the Korean Society of Safety
• /
• v.17 no.1
• /
• pp.87-93
• /
• 2002

In this thesis using FTA technique, the author proposes a new method of analysis of some accidents in construction work. Some efficient plans of safe facility investment are made out. For this study, I referred to 'The Death Accident in Construction Works', which have been published by Korea Industrial Safety Corporation from 1993 to 1999 for 6 years. I selected some of apartment constructions which have caused many deaths for the purpose of analysis in the study. I found that the concrete work using ferro-deck takes more deaths than the conventional construction. After finding this, I selected GANG FORM works using ferro-concrete which is the most widely used but causes many accidents. On the basis of the classification, I try to do some quantitative analyses by adding the death frequency and material factors. In order to draw up the most efficient investment plan, it is imperative that FT diagram be made out and that factors. In order to draw up the most efficient investment plan, it is imperative that FT diagram be made out and that minimal Cut Set be needed. It requires a great deal to labor and time to get Minimal Cut Set. The Minimal Cut Set which is formed of these process is the main factor to analyze disaster in the work. It is desirable that we add calculated percentage of accidents to these factors to these factors in value order, that is to say, from the high cost to low cost.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.189-195
• /
• 2009

Recently, the urban centralization phenomenon appears to be growing. As a result, many vigorous efforts for the use of underground space are being made. In particular, the basement depth of construction in the downtown area has deepened and construction is often done close to adjacent buildings. In this case, generally, the underground construction approach mainly used is the composite basement wall system. However, a cost analysis of the basement composite wall system does not exist. Therefore, in this study, the cost of the composite basement wall system was analyzed. The percentage breakdown of costs were: buttress work processes, 3% form work processes, 26% reinforcement work processes, 12% support work processes, 42% and other processes,17%. Accordingly, it will be necessary when developing new technology and construction methods to determine the development focus.