• Journal of Forest and Environmental Science
• /
• v.40 no.3
• /
• pp.167-179
• /
• 2024

Forest fire is one of the major disasters occurring in Nepal causing huge loss to the ecosystem, people and economy. They are mainly caused due to different anthropogenic activities. In Nepal, the forest fires occur during the dry season mainly from March to May. Nepal has roughly 29.5 percent forest area that are prone to forest fires and it is estimated that about 375 thousand hectares of forest were burned over one and half decade from 2000-2014. The forest fire risk is higher in the Terai and Siwalik regions than in any other region. To prevent and mitigate the forests fire incidences, the Government of Nepal has formulated and executed different policy instruments. In this regard, this paper aims to review the implementation of policies, strategies, Acts and regulations related to forest fire management at different levels of governance. Although federal and provincial governments' different policy instruments have considered forest fire and its management, these are not effectively implemented. It is not prioritized in terms of resource allocation, institutional capacity building, disaster preparedness and early warning. In addition, there are unclear and overlapping roles and responsibilities among three tiers of governments to effectively implement the policy provisions. Considering the consequences of the forest fire, governments at different levels need to devise an effective mechanism involving all stakeholders for implementing preventive and curative activities, strengthen institutions and build the capacity of human resources, and increase the level of resource allocation to implement the provisions of various legal and policy instruments.

• The Korean Journal of Ecology
• /
• v.20 no.3
• /
• pp.157-162
• /
• 1997

Changes on soil physical and chemical properties following the forest fire in Kosung area in Kangwon province were examined. Twenty seven sampling plots[16 burned (8 low intensity fire, 8 high intensity fire) and 11 unburned plots] from Pinus densiflora community were chosen and soil samples from three depths(0-5, 5-15, 15-25 cm) under the forest floor were collected. Forest fire in the area affected soil chemical properties. Soil pH, available phosphorus, base saturation, K, Ca, and Mg on the surface soil(0-5cm) in the burned areas compared with the unburned areas were increased, while soil properties on the subsurface soil(5-25 cm) were not changed. Organic matter, total nitrogen, available phosphorus, and exchangeable cations following the high in tensity fire on the surface soil were generally lower than those in the low intensity fire areas. This indicates that these nutrients on high intensity fire areas may be volatilized. The results suggest that the fire effects on soil chemical properties were confined mainly to the surface soil and were different between the high and the low intensity fire types.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1966-1971
• /
• 2011

Generally, the characteristics of the conductor that was affected by forest fire can be analyzed only when the forest fire is accurately modeled and its effect is identified. Few studies have been conducted with a forest fire model for transmission lines, and no results of the examination of the actual test specimens that were exposed to forest fire have been reported. As the deterioration characteristics of a forest fire are difficult to analyze in the actual field, an environment that was similar to that in the field was used in this study. Deterioration was deposited on a wire using an artificial flame experiment device, to analysis the temperature, surface and component characteristics. It seems that this analysis data in this study can be used as the basic data for the database that can be utilized to analyze wires exposed to forest fire and deterioration and to predict the ACSR wire refurnishment life.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.96-102
• /
• 2009

Forest fire ignition and spread characteristics are needed as basic data in fire management. Slope aspect of ignition point, spread direction, and wind direction at that time were analyzed and regression equations were proposed for predicting burned area, fire perimeter, head spread rate, and flank spread rate using combustion time using 101 forest fires broken out between 2007 and 2009 spring. 57% forest fires of investigated numbers were ignited in south, southwest, and southeast aspects and 68% of forest fires were spreaded to east, southeast, and northeast influenced by westerly wind. About 11.8ha forest was burned and 0.5km fire perimeter increase was predicted per hour. Head and flank spread rate were calculated 0.13km and 0.05km, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.5
• /
• pp.335-342
• /
• 2012

To prepare the eco-friendly fire retardant wood, Japanese red pine (Pinus densiflora), Hemlock (Tsuga heterophylla), and Radiata pine (Pinus radiata) were treated with inorganic chemicals, such as sodium silicate, boric acid, ammonium phosphate, and ammonium borate. Different combination and concentration of those chemicals were impregnated by vacuum/pressure treatment methods. The electron-beam treatment was used to increase the chemical penetration into the wood. The fire performance of the fire retardant treated wood was investigated. The penetration of chemicals into the wood was enhanced after electron beam treatment. Ignition time of the treated wood was the most effectively retarded by sodium silicate, ammonium phosphate, and ammonium borate. The most effective chemical combination was found at 50% sodium silicate and 3% ammonium borate, which satisfied flammability criteria for a fire retardant material in the KS F ISO 5660-1 standards.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.2
• /
• pp.137-143
• /
• 2008

In the present study, a forest fire spread was simulated with a three-dimensional, fully-transient, physics-based, computer simulation program. Physics-based fire simulation is based on the governing equations of fluid dynamics, combustion and heat transfer. The focus of the present study is to perform parametric study to simulate fire spread through flat and inclined wildland with vegetative fuels like trees or grass. The fire simulation was performed in the range of the wind speeds and degrees of inclination. From the results, the effect of the various parameters of the forest fire on the fire spread behavior was analyzed for the future use of the simulation in the prediction of fire behavior in the complex terrain.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.143-150
• /
• 2021

It introduces the contents of establishing a geostationary satellite-based forest fire monitoring system that can monitor areas of the Korean Peninsula 24 hours a day for forest fire monitoring, and describes how to establish a forest fire monitoring system and use it in various ways. In order to establish a satellite-utilized forest fire monitoring system, we will describe and draw conclusions on literature research, technical principles, forest fire monitoring means, and satellite forest fire monitoring system. The satellite-utilized forest fire monitoring system can consist of one geostationary satellite equipped with infrared detection optical sensors and a ground processing station that processes data received from satellites to spread surveillance information. Forest fire monitoring satellites are located in the country's geostationary orbit and should be operated 24 hours a day, 365 days a day. Forest fire monitoring technology is an infrared detection technology that can be used in national public interests such as forest fire monitoring and national security. It should be operated 24 hours a day, and to satisfy this, it is efficient to establish a geostationary satellite-based forest fire monitoring satellite system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.4
• /
• pp.213-217
• /
• 2003

Forest fire spread and intensity were modeled as a function of wind and fuel. Spread rate and intensity of forest fire were related to weight and thickness of forest fuel beds and to wind speed. Forest fire spread rate and fire intensity were differentiated according to wind speed. Rapid wind speed causes a faster forest fire spread rate and greater fire intensity than does slow wind speed. Relative burning time of the fire from beginning to end in the model was 161 sec at a wind speed of 0.5 m/sec and 146 sec at 1m/sec on the model. Average forest lire spread rate was 0.014 m/sec at a wind speed of 0.5 m/sec and 0.020 m/sec at 1m/sec. Average fire intensity was 0.183 ㎾/m at a wind speed of 0.5 m/sec, 0.259 ㎾/m at 1m/sec. Fire intensity was greater when forest fire spread rate was rapid.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.358-361
• /
• 2008

A study is made of thermal plume flow model for the development of helicopter simulator over the forest fire. For numerical analysis, the Boussinesq fluid approximation and line fire model, which is assumed by the shape of forest fire spreading, are adopted. Comparing 3-D full numerical solutions with 2-D similarity solution, it has been built a new model that is capable of temperature prediction along the symmetric vertical axis in both cases of laminar and turbulent flows.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2007.04a
• /
• pp.302-308
• /
• 2007