• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.235-241
• /
• 2019

An analytical method was developed for the determination of an antibiotic fungicide, kasugamycin, in agricultural products (hulled rice, potato, soybean, mandarin and green pepper) using liquid chromatographytandem mass spectrometry (LC-MS/MS). Samples were extracted with methanol adjusted to pH 13 using 1 N sodium hydroxide, and purified with a HLB (hydrophilic lipophilic balance) cartridge. Linearity of a matrix-matched calibration curve using seven concentration levels, from 0.001 to 0.1 mg/kg, was excellent with a correlation coefficient ($R^2$) of more than 0.9998. The limits of detection (LOD) and quantification (LOQ) of instrument were 0.0005 and $0.001{\mu}g/mL$, respectively, and the LOQ of analytical method calculated as 0.01 mg/kg. The average recoveries at three spiking levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n=5) were in the range of 71.2~95.4% with relative standard deviation of less than 12.1%. The developed method was simple and all optimized results was satisfied with the criteria ranges requested in the Codex guidelines and Food Safety Evaluation Department guidelines. The present study could be served as a reference for the establishment of maximum residue limits (MRL) of kasugamycin and be used as basic data for safety management relative to kasugamycin residues in imported and domestic agricultural products.

• Korean journal of food and cookery science
• /
• v.23 no.5
• /
• pp.650-663
• /
• 2007

The purpose of this study was to identify the sanitation management items of school foodservice suppliers that require improvement, by assessing their sanitation practices with food commodities. Our field assessment was performed using a total of 20 vendors supplying agricultural products, meat products, seafoods and processed products; all were located in the Seoul and Gyeonggi areas. The assessment tool for sanitation management was composed of 93 checklist items and was used to evaluate seven different categories; the facility and environment, management of the facility and equipment, food materials management, process control, water management, personal hygiene management, and laboratory instrument management. A score of two was given for "satisfactory", one for "fair", and zero for "unsatisfactory". The overall average supplier score was 1.7/2.0 (85.8%). The score of the seafood vendors was highest at 1.9 (95.4%), while the lowest score of 1.3 (65.7%) occurred with the processed product suppliers. Among the sanitation management categories, water management was scored at 2.0, while inspection management was lowest at 1.4. The subcategories indicating needed improvements for the processed product suppliers were raw materials, storage, transport and recall. For the agricultural product suppliers it was preparation management. furthermore, one item within the laboratory instrument management category was unsatisfactory for both the agricultural and processed product suppliers. In conclusion, these results can be used to develop sanitation management procedures for suppliers, as well as by administration agencies to evaluate and guide those suppliers.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.6
• /
• pp.2707-2711
• /
• 2014

Introduction: Smoking prevalence among the medical students is high in China. Therefore, understanding the smoking motivations of medical students is crucial for smoking control, but currently there are no scales questionnaires customized for probing the smoking motivations of medical students. This aim of study was to test and modify a questionnaire for investigating smoking motivations among medical students. Methods: A cross-sectional survey was conducted among 1,125 medical students at Xuzhou Medical College in China in 2012.The model fit and validity was assessed by confirmatory factor analysis (CFA) and the reliability was tested by single-item reliability, composite reliability, and item-total correlation. Results: The prevalence of smoking was 9.84 % among study population. In the modified scales, the global fit indices identified a CFI value of 0.96, TLI was 0.96, and the RMSEA was 0.063. CFA supported the two dimensional structure of the instrument. The average variance extracted ranged from 0.45 to 0.62. All single-item reliability scores were greater than 0.20, and the composite reliability ranged from 0.74 to 0.91. Conclusion: Modified scales could be the preliminary instrument used in evaluating the smoking motivations of medical students. However, it should be further assessed using other forms and methods of validity and reliability, additional motivations of smoking, and the survey of other medical colleges in China.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.635-646
• /
• 2010

This article focuses on Funology and a new classified application system based on concept of language and thought which are formed by body experience. It is defined by Funology Body as that. Funology Body is classifying and searching system which are consisted of a body, world (environment), and device tool. The body is sectioned by Brain, Eyes, Ears, Nose, Mouth, Hand, Torso, Feet, and Heart according as parts of the human body. This allows intuiting and experience searching as making classified system connected to the application relationship with concept of an each part of body. The Brain of the body is sub-classified by Book, Account, Business, Memory, Education, Search, and Aphorism to imply the application with thought. The Eyes take Video, Photography, and Broadcast for visibility. The Ears is categorized as Music, Instrument, Audio, and Radio for hearing. The Nose gets Perfume, Smell for olfactory sense. The Mouth is sectioned by Food, SNS, Chatting, Email, and Blog for eating and communication. The Hand sorts into Games, Kits, and Editing to handle, create, and play. The Torso is grouped by Health, Medical, Dance, Sport, Fashion, and Testyuorself related by protecting internal and meaning of the body core. The Feet is classified by Travel, Transportation, Map, and Outdoor for moving and concept of expanding the terrain. The Heart is consisted of Fear, Anger, Joy, Sadness, Acceptance, Disgust, Expectation, and Surprise for a human feeling. Beyond that, the World takes News, Time, Weather, Map, Fortune, and Shop, and Device tool gets Interface, Utilities. The Funology Body has a unique characteristic of giving intuitive and sensuous pleasure and reflection of users' attitude and taste for changing application flexibly.

• Korean Journal of Radiology
• /
• v.22 no.9
• /
• pp.1525-1536
• /
• 2021

Objective: To investigate the feasibility of cine three-dimensional (3D) balanced steady-state free precession (b-SSFP) imaging combined with a non-local means (NLM) algorithm for image denoising in evaluating cardiac function in children with repaired tetralogy of Fallot (rTOF). Materials and Methods: Thirty-five patients with rTOF (mean age, 12 years; range, 7-18 years) were enrolled to undergo cardiac cine image acquisition, including two-dimensional (2D) b-SSFP, 3D b-SSFP, and 3D b-SSFP combined with NLM. End-diastolic volume (EDV), end-systolic volume (ESV), stroke volume (SV), and ejection fraction (EF) of the two ventricles were measured and indexed by body surface index. Acquisition time and image quality were recorded and compared among the three imaging sequences. Results: 3D b-SSFP with denoising vs. 2D b-SSFP had high correlation coefficients for EDV, ESV, SV, and EF of the left (0.959-0.991; p < 0.001) as well as right (0.755-0.965; p < 0.001) ventricular metrics. The image acquisition time ± standard deviation (SD) was 25.1 ± 2.4 seconds for 3D b-SSFP compared with 277.6 ± 0.7 seconds for 2D b-SSFP, indicating a significantly shorter time with the 3D than the 2D sequence (p < 0.001). Image quality score was better with 3D b-SSFP combined with denoising than with 3D b-SSFP (mean ± SD, 3.8 ± 0.6 vs. 3.5 ± 0.6; p = 0.005). Signal-to-noise ratios for blood and myocardium as well as contrast between blood and myocardium were higher for 3D b-SSFP combined with denoising than for 3D b-SSFP (p < 0.05 for all but septal myocardium). Conclusion: The 3D b-SSFP sequence can significantly reduce acquisition time compared to the 2D b-SSFP sequence for cine imaging in the evaluation of ventricular function in children with rTOF, and its quality can be further improved by combining it with an NLM denoising method.

• Journal of Food Hygiene and Safety
• /
• v.35 no.2
• /
• pp.195-204
• /
• 2020

This research was investigated the effects of temperature and time against the formation of biofilms by foodborne pathogens on surfaces of polyethylene and stainless steel. After preliminary experiments with 32 strains from 6 species of foodborne pathogens (Bacillus cereus, Listeria monocytogenes, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Salmonella Typhimurium), one strain from each species with the highest biofilm formation efficiency was selected. All foodborne pathogens showed a tendency toward an increased ability for biofilm formation with increasing temperature, but there was no consistency between the two materials and between foodborne pathogens. At all tested temperatures, the biofilm formation ability of E. coli and P. aeruginosa on the polyethylene surface was higher than that on the stainless steel surface with significant differences. The foodborne pathogens all formed biofilms immediately upon inoculation, and biofilm formation by E. coli, P. aeruginosa, and S. Typhimurium increased on both the polyethylene and stainless steel surfaces at 1 h after inoculation compared to at 0 h. At 7 days after biofilm formation, the other strains except S. aureus showed no difference in survival rates on polyethylene and stainless steel. The ability of these 6 foodborne pathogens to form biofilms showed different trends depending on the type of bacteria and the instrument material, i.e., polyethylene and stainless steel.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.811-816
• /
• 2011

Cryoextraction (a freeze concentration using an instrument) can increase the sugar concentration in grape juice by reducing its water content, similar to the natural freezing of grapes for natural ice wine. In this study, fermentation of freeze-concentrated Campbell Early grape (Vitis labruscana) juice to 36 $^{\circ}Bx$ was carried out using Saccharomyces cerevisiae strains D8 and S13 isolated from Korean grapes. During the fermentation, strains S13 and D8 showed rapid sugar reduction and alcohol production compared with S. cerevisiae Fermivin$^{(R)}$ used as a control. After nine-day fermentation, the residual sugar contents were lower in W13(9.77%) and D8 wine(9.07) than that in Fermivin$^{(R)}$ wine(14.0%). Total acid content was high in the D8>S13>Fermivin$^{(R)}$ wine, in that order. The acetaldehyde content was highest in the D8 wine and lowest in the Fermivin$^{(R)}$ wine, among the three. The methanol content was slightly higher in the S13 and D8 wines than in the Fermivin$^{(R)}$ wine. In the sensory evaluation, the S13 wine exhibited the highest score in flavor and taste among the three wines. Both the two S13 and D8 wines exhibited higher scores than Fermivin$^{(R)}$ wine in overall preference.

• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.859-866
• /
• 2015

The purpose of this study was to develop a supplemental healthy food that can help prevent high blood pressure-related diseases caused due to the excessive consumption of sodium in salt. This was achieved by using ion-displacement techniques to produce mineral salt with lower sodium content by using fermented brown rice by-products rich in minerals. Mineral salt containing 2019.2 mg/100 g of potassium, 678.5 mg/100 g of magnesium, 48.7 mg/100 g of calcium, and 19.5 mg/100 g of sodium was obtained by fermenting brown rice by-products to create a culture medium for the mineral salt. Mineral salt containing 1769.7 mg/100 g of potassium, 573.6 mg/100 g of magnesium, 35.3 mg/100 g of calcium, and 19.5 mg/100 g of sodium was obtained by filtering and refining the by-product extract of fermented brown rice. The results showed that when the stream velocity of the instrument used for electrolysis was 200 mL/min and the current and the concentration of the reactive liquid in the purified water chamber were higher, the effect of electrolysis was greater. Ion hot water extraction of the fermented brown rice by-products improved by up to 95% and was collected as purified water within 90 min of the reaction time. Chloride ions with pH 7.4 were produced by mixing sodium hydroxide in a purified saline water chamber with electro-analyzed water. The salt produced in this study contained low sodium, 5.7~30%, as compared to 40% sodium content of the normal salt.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.376-381
• /
• 2011

The baking performance of Cudrania tricuspidata leaf powder as a value-added food ingredient was investigated in a model system of sponge cakes. Cudrania tricuspidata leaf powder was incorporated into cake batter at 5 levels (0, 5, 10, 15, and 20%, w/w) by adding equivalent amount based on total weight of wheat flour. The specific volume, height, moisture content, volume index, and symmetry index of sponge cakes decreased significantly with the increase in Cudrania tricuspidata leaf powder content (p < 0.05). Sponge cakes became darker and firmer with increase in Cudrania tricuspidata leaf powder content (p < 0.05), as indicated by decrease in the $L^*$ and increase in the firmness measured by the texture measuring instrument. Total polyphenol content also increased gradually as the Cudrania tricuspidata leaf powder content increased. Finally, the consumer acceptance test indicated that addition of Cudrania tricuspidata leaf powder up to 10% in the formulation of sponge cakes did not significantly influence the consumers' acceptability with respect to taste and flavor. In addition, the overall acceptability was not different from each other for control and 5% sample (p > 0.05).

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.288-294
• /
• 2011

BACKGROUND: Methylmercury is analyzed by HPLC-ICP/MS because of the simplicity for sample preparation and interference. However, most of the pre-treatment methods for methylmercury need a further pH adjustment of the extracted solution and removal of organic matter for HPLC. The purpose of this study was to establish a rapid and accurate analytical method for determination of methylmercury in fish by using HPLC-ICP/MS. METHOD AND RESULTS: We conducted an experiment for pre-treatment and instrument conditions and analytical method verification. Pre-treatment condition was established with aqueous 1% L-cysteine HCl and heated at $60^{\circ}C$ in microwave for 20 min. Methylmercury in $50{\mu}L$ of filtered extract was separated by a C18 column and aqueous 0.1% L-cysteine HCl + 0.1% L-cysteine mobile phase at $25^{\circ}C$. The presence of cysteine in mobile phase and sample solution was essential to eliminate adsorption, peak tailing and memory effect problems. Correlation coefficient($r^2$) for the linearity was 0.9998. The limits of detection and quantitation for this method were 0.15 and $0.45{\mu}g/kg$ respectively. CONCLUSION: Result for analytical method verification, accuracy and repeatability of the analytes were in good agreement with the certified reference materials values of methylmercury at a 95% confidence level. The advantage of the established method is that the extracted solution can be directly injected into the HPLC column without additional processes and the memory effect of mercury in the ICP-MS can be eliminated.