• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.715-722
• /
• 2012

A structural health monitoring (SHM) technique for locating impact position in a composite plate is presented in this paper. The technique employs a single sensor and spatial focusing properties of time reversal (TR) and inverse filtering (IF). We first examine the focusing effect of back-propagated signal at the impact position and its surroundings through simulation. Impact experiments are then carried out and the localization images are found using the TR and IF signal processing, respectively. Both techniques provide accurate impact location results. Compared to existing techniques for locating impact or acoustic emission source, the proposed methods have the benefits of using a single sensor and not requiring knowledge of material properties and geometry of structures. Furthermore, it does not depend on a particular mode of dispersive Lamb waves that is frequently used in the SHM of plate-like structures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.215-216
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.246-247
• /
• 2010

• Journal of the Korean Geotechnical Society
• /
• v.30 no.7
• /
• pp.27-40
• /
• 2014

So far, studies on the settlement of breakwater have mainly been conducted through numerical model tests focusing on an analysis or through the laboratory wave tank tests using a scaled model. There has not been a study on the settlement that is measured in an actual breakwater structure. This study analyzed the data of settlement that has been measured in an actual caisson breakwater for a long time and the characteristics and causes of wave-induced settlement in the caisson (including beneath ground), based on qualitative aspect, were examined. The analysis revealed that wave clearly has an effect on the settlement in caisson, especially in the condition of high wave such as typhoon. Caisson settlement is caused by the liquefaction of ground, which is due to the increase of excess pore pressure, the combination of oscillatory excess pore pressure and residual excess pore water pressure, and the solidification process of ground due to dissipation of the accumulated excess pore pressure. The behavior of excess pore pressure in the ground beneath the caisson is entirely governed by the behavior of the caisson. Ground that has gone through solidification is not likely to go through liquefaction in a similar or a smaller wave condition and consequently, the possibility of settlement is reduced.

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.145-153
• /
• 2020

With the spread of the Korean Wave culture, the importance of the effects of Korean Wave contents and the direct and indirect effects on product purchase is increasing. In the early days, the Korean Wave started around K-Pop and K-Dramas, but now its scope has been expanded to include various contents. In the case of Vietnam, interest in K-Sports has recently increased, and the influence of K-SNS is also increasing. Accordingly, in this study, a research model was established and tested to investigate the relationship between product image and attitude toward Korean cosmetics, and purchase intention for Korean cosmetics consumers in Vietnam. The results of the analysis are as follows. First, among the four factors of Korean Wave contents, K-Pop, K-Drama, and K-SNS had a positive effect on product image, while K-Sports was found to have no significant effect. Second, it was confirmed that the product image of Korean cosmetics has a positive effect on product attitude, and the product attitude has a positive effect on purchase intention. Therefore, in the Vietnamese cosmetics market, it is suggested that focusing on the product image focusing on Korean Wave contents, and promoting activities can achieve effective results for the purchase intention of Vietnamese consumers.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.534-549
• /
• 2009

As the thin film technology has emerged in various fields, adhesion of the film interface becomes an important issue in terms of the longevity and durability of thin film devices. Diverse nondestructive methods utilizing acoustic techniques have been developed to assess the interfacial integrity. As an effective technique based on the ultrasonic wave focusing and the surface acoustic wave(SAW) generation, scanning acoustic microscopy(SAM) has been investigated for adhesion evaluation. Visualization of film microstructures and quantification of adhesion weakness levels by SAW dispersion are the recent achievements of SAM. To overcome the limitations in the theoretical dispersion model only suitable for perfectly elastic and isotropic materials, a new model has been more recently developed in consideration of film anisotropy and viscoelasticity and applied to the adhesion evaluation of polymeric films fabricated on semiconductive wafers.

• Atmosphere
• /
• v.27 no.2
• /
• pp.199-211
• /
• 2017

The cold surges over East Asia can be grouped to two types of the wave-train and the blocking. Recently, the observational study proposed new dynamical index to objectively identify cold surge types. In this study, the dynamical index is applied to the simulations of 10 climate models, which participate in the Coupled Model Intercomparison Project Phase 5 (CMIP5). Focusing on assessment of cold surge simulation, we discuss characteristic of the wave-train and blocking cold surges in the climate models. The wave-train index (WI) and the blocking index (BI) based on potential temperature anomalies at dynamical tropopause over the subarctic region, the northeast China, and the western North Pacific enable us to classify cold surges in the climate models into two types. The climate models well simulate the occurrence mechanism of the wave-train cold surges with vertical structure related to growing baroclinic wave. However, while the wave-train in the observation propagates in west-east direction across the Eurasia Continent, most of the models simulate the southeastward propagation of the wave-train originated from the Kara Sea. For the blocking cold surges, the general features in the climate models well follow those in the observation to show the dipole pattern of a barotropic high-latitude blocking and a baroclinic coastal trough, leading to the Arctic cold surges with the strong northerly wind originated from the Arctic Sea. In both of the observation and climate models, the blocking cold surges tend to be more intense and last longer compared to the wave-train type.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.250-253
• /
• 2015

High contrast grating (HCG) is the structure made up of the sub-wavelength grating of high-index and the surrounding layer of low-index, which reveals high contrast between two materials. Its advantages include high reflectivity over a broad bandwidth, polarization and wavelength selectivity, optical high-Q resonator, and phase modulation. In this work, the HCG structure comprising of indium tin oxide (ITO) and Silicon (Si), for the surrounding layer and the grating layer respectively, was studied. Its theoretical model was established, and transmittance, phase and optical behavior were calculated by rigorous coupled-wave analysis and finite element method. Furthermore, the established structure was fabricated to validate its feasibility. The fabricated structure shows the focusing capability whose length is about $10{\mu}m$, and the feasibility of the structure was demonstrated. It is also meaningful that ITO layer can contribute to the fabrication of the HCG structure, leading to enable the structure to be electrical-driven.

• Architectural research
• /
• v.26 no.3
• /
• pp.83-92
• /
• 2024

The profound impact of earthquakes on human lives and the built environment emphasizes the substantial human and economic losses result-ing from structural collapses. Many researchers in this field highlight the longstanding societal challenge posed by earthquakes and under-score the imperative to minimize such losses. Over the decades, researchers have dedicated efforts to seismic design, focusing on improv-ing structural performance to mitigate earthquake-induced damages. This has led to the development of various structural analysis methods. In this research, a specific RC frame structure (401 Bldg.) at Kyungpook National University that is designed for educational purposes, serves as a representative case. This research employs SAP 2000 for simulation, aiming to assess the structural performance under seismic condi-tions, focusing on evaluating the structural behavior under different column orientations. This research utilizes RSA (Response Spectrum Analysis) to comprehensively examine parameters of displacement, base shear force, base moment, joint radians, and story drift. Referring to the results from RSA, this research also assesses the structural performance using LTHA (Linear Time History Analysis) by conducting synthetic frequency domain and synthetic time domain analyses based on the seismic wave from the Kobe 1995 earthquake (Abeno). Based on the findings from the discussions, this research is expected to be a valuable reference for structural design within seismic resistance and the seismic reinforcement of existing RC frame structures.

• 한국노년학
• /
• v.32 no.4
• /
• pp.1101-1118
• /
• 2012

The purpose of this study is to examine which factors determine self-rated health(SRH) among Korean elderly focusing on gender differences. To achieve this purpose, it uses the Hallym Longitudinal Study of Aging, wave 4 in 2009. Participants aged 65 and over from wave 4 were selected(N=986, male 407, female 579). From wave 4, all variables were selected except for respondents' education which was from wave1. In analyses, $x^2$ or t-test were conducted to examine whether independent variables significantly differ by SRH. Then, since a dependent variable consisted of two categories-being healthy or not being healthy, logistic regressions were run. What makes gender differences in the link of independent variables to SRH were 75-84 age group, education, and IADLs. For females, 75-84 age group rated their health as worse compared to 65-74 age group, but this age group did not have significant effect on SRH for males. Females graduating from junior high school were more likely to higher rate their health compared to their counterparts. However, education was not significant for males. Instrumental activities of daily living(IADLs) is one of variables affecting SRH by making gender differences. Female having problems with IADLs were more likely to be significantly negatively rate their health compared to males. Through focusing on age, education, IADLs making gender difference in evaluating health, governments needs to support males and females differently.