• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.649-656
• /
• 2011

The increase in the traffic demand and behavioral pattern of its use reached the limit for the only means of road construction to bear; thus the multilateral efforts to find a solution to this problem together with the examination and research on this issue, among which the most representative strategy is Ramp Metering System controlling access traffic volume to connection roads. The operation standard and running time was re-established in consideration of geographical conditions and traffic circumstances by considering the standard of operation and running time of the currently operated Jangsu- Jungdong section of the outer ring expressway of Seoul. For this purpose, this research analyzed the operative standard of RMS home and abroad and suggested a new operative standard of ramp metering through the analysis of break points.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.3
• /
• pp.1-10
• /
• 2011

Sanbangsan and Yongmuri Beach as geosites are very wide areas, and tourists have accessed them via various courses; hence the need to double the number of geosite signs and disperse them at each point. The signs should read "Sanbangsan lava dome," "Yongmuri tuff ring," and "Relationship between the Sanbangsan lava dome and Yongmuri tuff ring." The contents of the sign should be systemic, simple, and clear because tourists have to read it in a short time. The viewpoint of the research area can be largely divided into Sanbangsan View, Yongmuri Beach View, Sanbangsan, and Yongmuri Beach View. Three of each viewpoint (total of 9 viewpoints) can be placed. In the geosite of Sanbangsan and Yongmuri Beach are 5 sub-theme views including the boundary sheet of Sanbangsan and Yongmuri tuff ring, xenolith basalt, marine pothole, tafoni, and crossed sedimentary layer. These sub-theme views are important in understating not only the geosite but the overall geopark as well, so they should be developed and utilized aggressively.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.361-370
• /
• 2016

Objective:The aim of this study is to evaluate contributions of individual finger forces associated with various levels of submaximal voluntary contraction tasks. Background: Although many researches for individual finger force have been conducted, most of the studies mainly focus on the maximal voluntary contraction. However, Information concerning individual finger forces during submaximal voluntary contraction is also very important for developing biomechanical models and for designing hand tools, work equipment, hand prostheses and robotic hands. Due to these reasons, studies on the contribution of individual finger force in submaximal grip force exertions should be fully considered. Method: A total of 60 healthy adults without any musculoskeletal disorders in the upper arms participated in this study. The young group (mean: 23.7 yrs) consisted of 30 healthy adults (15 males and 15 females), and the elderly group (mean: 75.2 yrs) was also composed of 30 participants (15 males and 15 females). A multi-Finger Force Measurement (MFFM) System developed by Kim and Kong (2008) was applied in order to measure total grip strength and individual finger forces. The participants were asked to exert a grip force attempting to minimize the difference between the target force and their exerted force for eight different target forces (5, 15, 25, 35, 45, 55, 65, and 75% MVCs). These target forces based on the maximum voluntary contraction, which were obtained from each participant, were randomly assigned in this study. Results: The contributions of middle and ring fingers to the total grip force represented an increasing trend as the target force level increased. On the other hand, the contributions of index and little fingers showed a decreasing trend as the target force level increased. In particular, Index finger exerted the largest contribution to the total grip force, followed by middle, ring and little fingers in the case of the smallest target force level (5% MVC), whereas middle finger showed the largest contribution, followed by ring, index and little fingers at the largest target force levels (65 and 75% MVCs). Conclusion: Each individual finger showed a different contribution pattern to the grip force exertion. As the target force level increase from 5 to 75% MVC, the contributions of middle and ring fingers showed an increasing trend, whereas the contributions of index and little fingers represented a decreasing trend in this study. Application: The results of this study can be useful information when designing robotic hands, hand tools and work equipment. Such information would be also useful when abnormal hand functions are evaluated.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.117-121
• /
• 2017

We show Akari data, Herschel data and data from the SCUBA2 camera on JCMT, of molecular clouds. We focus on pre-stellar cores within the clouds. We present Akari data of the L1147-1157 ring in Cepheus and show how the data indicate that the cores are being externally heated. We present SCUBA2 and Herschel data of the Ophiuchus region and show how the environment is also affecting core evolution in this region. We discuss the effects of the magnetic field in the Lupus I region, and how this lends support to a model for the formation and evolution of cores in filamentary molecular clouds.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.127-132
• /
• 2012

This study discusses photoresist forming using a composite grayscale to fabricate a Fresnel lens. Grayscale lithography is a common production method used to facilitate the forming of lenses with different curvatures and depths. However, this approach is time consuming and expensive. This study proposes a method for overcoming these obstacles by integrating a digital micromirror device and microscope to supplant the traditional physical grayscale mask. This approach provides a simple and practical maskless optical lithography system. According to the results, the two adjacent grayscales displayed substantial differences between the high grayscale and influence the low grayscale that ultimately affected photoresist formation. Furthermore, we show that change of up to 150% in the slope can be achieved by changing the grayscale gradient in the central zone and the ring profile. The results of the optical experiment show a focus change with different gray gradients.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.392-398
• /
• 2013

As the essential techniques for the CD (Critical Dimension) measurement of the LCD pattern, there are various modules such as an optics design, auto-focus [1-4], and precise edge detection. Since the operation of image enhancement to improve the CD measurement repeatability, a ring type of the reflected lighting optics is devised. It has a simpler structure than the transmission light optics, but it delivers the same output. The edge detection is the most essential function of the CD measurements. The CD measurement is a vital inspection for LCDs [5-6] and semiconductors [7-8] to improve the production yield rate, there are numbers of techniques to measure the CD. So in this study, a new subpixel algorithm is developed through facet modeling, which complements the previous sub-pixel edge detection algorithm. Currently this CD measurement system is being used in LCD manufacturing systems for repeatability of less than 30 nm.

• Kyungpook Mathematical Journal
• /
• v.64 no.1
• /
• pp.15-30
• /
• 2024

In this paper, we focus on partial isometry elements and strongly EP elements on a ring. We construct characterizing equations such that an element which is both group invertible and MP-invertible, is a partial isometry element, or is strongly EP, exactly when these equations have a solution in a given set. In particular, an element a ∈ R^# ∩ R^† is a partial isometry element if and only if the equation x = x(a^†)^*a^† has at least one solution in {a, a#, a^†, a^*, (a^#)^*, (a^†)^*}. An element a ∈ R^#∩R^† is a strongly EP element if and only if the equation (a^†)^*xa^† = xa^†a has at least one solution in {a, a^#, a^†, a^*, (a^#)^*, (a^†)^*}. These characterizations extend many well-known results.

• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.113-118
• /
• 2002

We developed engineering methods to control gas flow in a plasma reactor in order to achieve good etch depth uniformity for large area GaAs etching. Finite difference numerical method was found quite useful for simulation of gas flow distribution in the reactor for dry etching of GaAs. The experimental results in $BCl_3/N_2/SF_6/He$ ICP plasmas confirmed that the simulated data fitted very well with real data. It is noticed that a focus ring could help improve both gas flow and etch uniformity for 150 mm diameter GaAs plasma etch processing. The simulation results showed that optimization of clamp configuration could decrease gas flow uniformity as low as $\pm$ 1.5% on an 100 mm(4 inch) GaAs wafer and $\pm$ 3% for a 150 m(6 inch) wafer with the fixed reactor and electrode, respectively. Comparison between simulated gas flow uniformity and real etch depth distribution data concluded that control of gas flow distribution in the chamber would be significantly important in order or achieve excellent dry etch uniformity of large area GaAs wafers.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.459-467
• /
• 2020

From the perspective of the artist who produces modern ornaments, I wanted to see the future of modern ornaments in the hyperconnected era. I would like to find a practical way of converging information communication technology, which is one of them, and applying nfc tag among them. For the practical approach, after looking at the actual examples of commercial ring products using nfc tag technology, I tried to find a practical method that can be applied to modern ornaments produced in the workshop. As a result, two realistic alternatives were drawn: the investment method, which is free to converge, but has limited technical utilization, and an assembly method that requires high convergence from the design planning stage. After then, to know investment methods, have been produced that may have problems with real applications. I made a real sample, not a concept, to explain the technical factors and precautions necessary for applying nfc technology.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.208-212
• /
• 2008

The mediacy is now evolving with the development of mankind civilization. In the evolution, mediacy shows duplicate logic of remediacy with the opposite mediacy property between immediacy and hypermediacy. The duplicate logic of remediacy is defined as a result of hypermediacy which clearly requires transparency and absorption of immediacy. Because of changes from analog to digital age and the development of image technique, At present, the era is coming when the splendid and spectacle visual speaks for the screen not well-organized script and direction. With this developing period, the research for visual effect is actively performed and advanced to the new study. Though the study of visual effects contains the hypermediacy trait, it is also conjugated as a research field for immediacy on the screen which is the wish of content production directors. In this study, the analysis of case study for the movie "The Lord of The ring"'s visual effect application is carried out. Also, it is investigated that visual effects can guarantee for the verification of valuable new research filed which insure transparency and absorption in the hypermediacy results. Furthermore, on this study, it is executed for the contribution of the identity and systematization in the new research field "Visual Effects".