• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.55-65
• /
• 1999

So far, I Conducted an examination with focus on the type, characteristic, and test methods of impact test. which is a type of mechanical that evaluate materials. As mentioned previously, in testing soldering strength of soldering is the load when the object under experiment is broken down with the result of flexibility test or peel test. In this method, a hevay load is necessary until alloy of parent metal is bended, if the alloy of the parent metal has a large mechanical quality(peel strength or resisting power). Once the alloy of the parent metal is bended, however, it tends to come into pieces abruply form the part where soldered. Therefore, a metal has a high breakdown value if the degree of strength of its parent metal is high even if the result of measurement indicates otherwise. Thus, the result of the test did not correspond to the clinical result. Therefore, this study concludes as the following from a test of strength of soldering by mean of conducting an impact test, which is a type of mechanical evaluation methods : 1. Among various impact tests, a charpy thpe is more appropriate than the izod type in testing strength of soldering. 2. As far as test piece is concerned, to use subsized impact test piece is appropriate in the impact test in that it does not have notch. 3. In the matter of analysis, it is appropriate to measure absorbing energy which results from rupture of test piece.

• Survey Research
• /
• v.1 no.2
• /
• pp.89-115
• /
• 2000

The present study attempts to (1) identify the critical dimensions that affect job performance of computer programmers and (2) clarify the specific behaviors that are related to each performance dimension, and measure them fairly and accurately. In particular, this study focus on producing a Behaviorally Anchored Rating Scales(BARS) with a high level of acceptability by both raters and ratees. 422 computer programmers from 8 companies participated in the process of developing the scale, which consisted of typical 5 phases. The results demonstrated that 13 performance dimensions were derived and the final job performance rating scale was made by vertically arraying 5 representative behavior anchors ordered by their scale value for each of 13 dimensions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.11
• /
• pp.1-8
• /
• 2014

Recently, damages resulting from light trespass that affects the human body (sleep) as one of light pollution control elements of outdoor Luminaires equipment are leading to continuous civil complaints and disputes and this is gradually expanding into a social problem. Accordingly, this study considers the need to develop a shielding plate in consideration of light distribution performance as an efficient measure to cope with damages from light trespass. Therefore, this study developed a shielding plate for LED Luminaires with a fine view that maximally inhibited light toward the backlight area compared to existing shielding plates and verified its performance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.2
• /
• pp.73-82
• /
• 2003

For measurements and analysis of dielectric characteristics of planar slabs of microwave absorbing materials, I have applied a free-space method in the frequency range of 8~14 GHz. The measurement system for free-space method consists of transmit and receive antennas, mode transitions, precision coaxal cables, the network analyzer, and a computer Special Spot-focused horn lens antenna was used to eliminate diffraction effects. Diffraction effects at the edges of the sample are minimized by satisfying the condition for minimum transverse dimension of the plate and the beamwidth of the antennas at the focus. The time-domain gating feature of the network analyzer and the thru, reflect, and line(TRL) calibration technique were used to eliminate the effects of undesirable multiple reflections. The complex coefficients of reflection and transmission, $S_{11}$ and $S_{21}$, of planar samples were measured for standard materials such as Teflon, Rexolite$\textregistered$ 2200. The results were compared with existing measurement method. And I applied a free-space method for measurement to measure dielectric constants of some electromagnetic absorbing materials. Dielectric properties for the same samples were also measured with a 7mm coxial transmission line method for purposes of comparison with the free-space method.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.471-472
• /
• 2007

The scalp is skin tissue for skull-protection and roots for hair growth. Therefore continuous monitoring of scalp condition is essential for hair management. However, the equipments for existent are inconvenient to use because of focus tremor and external factors(Hair Gel, Wax, accessories and so on). Furthermore there is a problem to use an expensive optical devices like CCD (Charge Coupled Device) camera or lens of 200 - 1000 magnification. It causes a difficulty of using those equipment. We design the special electrode(length 5.65mm, diameter 0.8mm of needle shape) and the impedance system(1kHz, 78uA). Tn this paper, we can measure scalp impedance with our system. Moreover, we find the possibility of classifying scalp condition with measured impedance values. For the classification of scalp condition, we used ARAMO-TS as an imaging system. In conclusion, the problem of existent devices could be improved using these method. It also has a benefit of continuous monitoring of scalp condition.

• Journal of Communications and Networks
• /
• v.13 no.2
• /
• pp.149-159
• /
• 2011

In this paper, we study the problem of how to design a medical-grade wireless local area network (WLAN) for healthcare facilities. First, unlike the IEEE 802.11e MAC, which categorizes traffic primarily by their delay constraints, we prioritize medical applications according to their medical urgency. Second, we propose a mechanism that can guarantee absolute priority to each traffic category, which is critical for medical-grade quality of service (QoS), while the conventional 802.11e MAC only provides relative priority to each traffic category. Based on absolute priority, we focus on the performance of real-time patient monitoring applications, and derive the optimal contention window size that can significantly improve the throughput performance. Finally, for proper performance evaluation from a medical viewpoint, we introduce the weighted diagnostic distortion (WDD) as a medical QoS metric to effectively measure the medical diagnosability by extracting the main diagnostic features of medical signal. Our simulation result shows that the proposed mechanism, together with medical categorization using absolute priority, can significantly improve the medical-grade QoS performance over the conventional IEEE 802.11e MAC.

• Genomics & Informatics
• /
• v.9 no.1
• /
• pp.39-43
• /
• 2011

MicroRNAs (miRNAs) are recently discovered small RNA molecules usually resulting in translational repression and gene silencing. Despite the fact that specific cloning of small RNA's is a method in practice, computational identification of miRNA's has been a major focus recent days, since is a rapid process following AB initio and sequence alignment methods. Here we developed new software called MiRPI that aims to identify the highly conserved miRNAs without any mismatches from given fasta formatted gene sequences by using non-repeated miRNA dataset of the user's interest. The new window embedded with the software is used to identify the targets for inputted mature miRNAs in the mRNA sequences. Also MiRPI is designed to measure the precursor miRNA statistics, majorly focusing the Adjusted Minimum Folding free Energy (AMFE) and Minimum Folding free Energy Index (MFEI), the most important parameters in miRNA confirmation. MiRPI is developed by PERL (Practical Extraction and Report Language) and Tk (Tool kit widgets) scripting languages. It is user friendly, portable offline software that works in all windows OS, sized to 3 MB.

• Journal of Information Technology Applications and Management
• /
• v.26 no.4
• /
• pp.1-18
• /
• 2019

The virtual reality (VR) is an immerging technology used in the serious games industry to treat psychological disorders like dementia. We created a system named as Virtual Reality Home (VRH) for the elderly who lived with Alzheimer's disease (or other form of dementia) and cognitive impairment using virtual reality technology. The purpose of our study is to measure the long-time immersion and retention of VRH on the moods and apathy, enhancement in physical and brain stimulation as well as a decision making with peoples of dementia and explore the experience of aged care home staff's member. The VRH shows a positive impact on the elderly participants and staff members. During the VRH experience, excitement and a great level of alertness were observed among the participants but few of them were feeling anxiety. Furthermore, we observed the improvement in physical, memory and brain stimulation, but the participants have a low focus on decision making because they wanted to explore all interactable objects in the VRH. This study suggests that the VR may have the potential to improve the quality of life, and these results can assist to expand the future development in the enhancement of efficiency of people with dementia.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.163-174
• /
• 2020

Numerous wearable technology companies have recently developed several headmounted display (HMD) products for virtual reality (VR) services. 5G wireless networks aim at providing high-quality 3D multimedia services such as VR, augmented reality, and mixed reality. In this study, we examine the application of millimeter-wave (mmWave) technology to realize low-latency wireless communication between an HMD and its content server. However, the propagation characteristics of mmWave present several challenges such as the deafness, blockage, and beam alignment problems, and interference among content servers. In this study, we focus on an environment that provides VR services in the mmWave band and introduce existing techniques for addressing such challenges. In addition, we employ a commercialized IEEE 802.11ad VR dongle to measure the actual data rate of an mmWave VR application and identify the degree to which the performance deteriorates when the above problems occur. Finally, we verify the feasibility of the proposed solutions through a simulation of several VR scenarios in the mmWave band.

• Women's Health Nursing
• /
• v.20 no.3
• /
• pp.225-233
• /
• 2014

Purpose: This study was to assess the intention of undergoing Pap testing and to identify influencing factors of HPV knowledge and their attitude related to Pap test by sexual activity among unmarried nurses. Methods: A cross sectional survey design was employed, utilizing a self-administered questionnaire amongst 343 unmarried nurses. Descriptive statistics was utilized to analyze data and inferential statistics used an independent-t test and ${\chi}^2$ test for the differences in measurement variables, and odds ratios for factors on intention of Pap testing by sexual activity. Results: Nurses not sexually active were significantly higher in intention of Pap testing (${\chi}^2$=40.15, p<.001) and influencing factors of HPV knowledge (t=3.93, p=.048) than did nurses who were sexually active. Factors influencing intention were regularity of the breast self-examination (Adjusted Odds Ratio [AOR]=4.20, 95% Confidence Interval [CI]=1.93~9.17), HPV knowledge (AOR=2.49, 95% CI=1.36~4.56), and attitudes toward the Pap test(AOR=2.33, 95% CI=1.25~4.34) amongst nurses who never had sexual experience. Conclusion: It is necessary to minimize negative attitudes of Pap testing and to increase HPV knowledge in order to improve intention of Pap testing for women who were not sexually active. More focus would be given to sexually active women to get Pap tested as a preventive measure for cervical cancer.