• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.97-106
• /
• 2009

self-loading, various problems related to construction can be solved as well as the save of construction cost. Thus, this study has an aim of applying foam concrete to structural purpose by adding bottom ash as a reinforcing material like fine aggregate, in contrast to conventional non-structural usage such as soundproofing or insulating materials. In addition, it was evaluated in terms of unit volume weight, flow value, air void, water absorption and dosage of foam agent wether replacement of cement by granulated blast furnace slag or fly-ash has an effect on the material characteristics of foam concrete. As results of experiments, it can be found that the increase of fine aggregate ratio, that is to say, the increase of bottom ash results in the increase of unit volume weight, while decreasing air void and flow value. But, appropriate addition of bottom ash to foam concrete makes it easy to control a homogeneous and uniform quality in foam concrete due to less sensitive to bubbles. As the replacement ratio of mineral admixtures such as granulated blast furnace slag and fly-ash increases, as unit volume weight tends to decrease. In the meanwhile, serious effects were shown on fluidity of foam concrete when more than limit of replacement ratio was applied.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.759-766
• /
• 2002

Regular, spherical and isotropic open-microcellular foams having low density were prepared by the high internal phase emulsion (HIPE) polymerization mainly composed of styrene monomer and water The effects of Polymerization conditions. such as the content of water, divinylbenzene as a crosslinking agent and dodecane as a chain transfer agent, were investigated based on the tell size and foam properties. The microstructural morphology was observed using scanning electron microscopy (SEM) and the compression modulus of the foam was evaluated using compression test. The dropwise feeding of the aqueous phase into the oil phase was more effective than the batch feeding in producing the uniform and stable foam. Agitation speed and surfactant strongly influenced on the cell size and the window size between water droplets. Introduction of chain transfer agent increased the cell size, whereas it decreased the window size. Compression modulus increased with the crosslinking agent, but decreased with the chain transfer agent.

• Journal of Adhesion and Interface
• /
• v.8 no.3
• /
• pp.1-8
• /
• 2007

An atmospheric plasma pre-treatment method was applied to polyurethane foam to improve its contact angle and adhesion. In order to investigate the optimum reaction condition of plasma treatment, type of reaction gas (nitrogen, argon, oxygen, air), rate of gas flow (30~150 mL/min), and reaction time (0~30 sec) were examined in a plate plasma reactor. Also, the effects were compared to those of a conventional vacuum plasma pre-treatment system. The result of the surface modification with respect to the treatment procedure was characterized by using SEM and ATR-FTIR. Due to a decrease of the contact angle of polyurethane foam, the greatest adhesion strength was achieved at a flow rate of 100 mL/min and at a reaction time of 10s for N2 gas. Consequently, the atmospheric plasma treatment reduced the contact angle of the polyurethane foam and also resulted in the improvement of the peel strength.

• Journal of muscle and joint health
• /
• v.29 no.1
• /
• pp.18-27
• /
• 2022

Purpose: A network meta-analysis was conducted to assess the comparative effects and ranks of repositioning for pressure ulcer prevention in adults. Methods: A network meta-analysis was performed in a frequency method, using the "netmeta" package of R software version 4.1. The effects of repositioning intervention were confirmed by the odds ratio. The comparative ranking of the repositioning effects was confirmed using the cumulative probability (P-score). Results: Seven intervention studies were included in this study. Based on the P-score, the use of the repositioning system was ranked as the most effective among all interventions (P-score 78.7%). Next was 3~4-hour repositioning combined with memory foam mattress use (P-score 77.2%), use of wearable sensor (P-Score 61.4%), 2-hour repositioning combined with memory foam mattress use (P-score 59.1%), 2-hour repositioning combined with powered air pressure redistribution mattress use (P-score 18.0%), and 4-hour repositioning combined with powered air pressure redistribution mattress use (P-score 18.0%). Conclusion: This study provides information on the relative comparative value of various repositioning interventions to prevent pressure ulcers using network meta-analysis. This is expected to be useful for nurses' decision-making when applying repositioning interventions in clinical practice

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.345-352
• /
• 2017

In this study, the effect of cryogenic liquefied natural gas leakage and loading on liquefied natural gas cargo hold is investigated to observe the performance of the polymer foam material that comprises the cryogenic insulation of the cargo hold. The primary barriers of liquefied natural gas carrier that are in contact with the liquefied natural gas will leak if damage is accumulated, owing to fluid impact loads or liquefied natural gas loading / unloading over a long period. The leakage of the cryogenic fluid affects the interior of the polymer foam, which is a porous closed cell structure, and causes a change in behavior with respect to the working load. In this study, mechanical properties of polyisocyanurate foam specimen, which is a polymer material used as insulation, are evaluated. The performance of the specimens, owing to the cold brittleness and the impregnation effects of the cryogenic fluids, are quantitatively compared and analyzed.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.283-290
• /
• 2009

Differently from fly ash, the bottom ash produced from thermoelectric power plant has been treated as an industrial waste matter, and almost reclaimed a tract from the sea. If this waste material is applicable to foam concrete as an aggregate owing to its light-weight, however, it may be worthy of environmental preservation by recycling of waste material as well as reducing self-weight of high-rising structure and horizontal forces and deformations of retaining wall subject to soil pressure. This study has an objective of evaluating the effects of application of bottom ash on the mechanical properties of foam concrete. Thus, the ratio of bottom ash to cement was selected as a variable for experiment and the effect was measured in terms of unit weight of concrete, air content, water-cement ratio and compressive strength. It can be observed from experiments that the application ratios have different effects on the material parameters considered in this experiment, thus major relationships between application ratio and each material parameter were finally introduced. The result of this study can be applied to decide a mix design proportion of foam concrete while bottom ash is used as an aggregate of the concrete.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.7
• /
• pp.271-280
• /
• 2021

The purpose of this study was to conduct a subjective and objective evaluation to verify the improvements in acne skin conditions followed by the use of foam cleanser, skin toner, and a facial pack that contains bamboo vinegar. The research targets are 20 male and female high school students in Gwangju and Jeolla regions with acne skin of grade II and above based on the Korean Acne Grading System (KAGS). For the experiment, the subjects were classified between an experimental group with 10 subjects who used bamboo vinegar foam cleanser, skin toner, and facial pack and a control group with 10 subjects who used foam cleanser, skin toner, and facial pack without bamboo vinegar, and the subjects had to use the foam cleanser, skin toner, and facial pack for 12 weeks. In the case of skin improvement effects founded upon the objective measurement values, the experimental group showed a greater improvement for reducing the pores in the forehead, nose ridge, and left cheek (p<.001) compared to the control group, and the experiment group had higher satisfaction overall even for the skin improvement effects based on the subjective evaluation tool (p<.05, p<.001). The overall values of the satisfaction of the cosmetics showed that the experiment group had higher values (p<.01, p<.001) compared to the control group for the foam cleanser, skin toner, and facial pack, and there were statistically significant differences for usability in details (p<.01, p<.001). In conclusion, it was proven that bamboo vinegar is an effective natural cosmetic product material to improve acne skin conditions.

• Journal of Korea Foundry Society
• /
• v.24 no.1
• /
• pp.34-39
• /
• 2004

The effects of casting condition and hot melt glue during Lost Foam Casting were investigated on the fluidity of Al alloy melt. The fluidity increased linearly with increasing pouring temperature in thick castings but non-linearly in thin casting due to the difference in main heat flow direction. The metal flow velocity was in range of $0.5{\sim}2.7$ cm/s in no evacuation condition and the minimum value of it was measured after the melt flow through the hot melt barrier. The mold evacuation improved the metal flow velocity by around $0.5{\sim}1$ cm/s. And the reaction zone layer thickness was about 1 cm in no-evacuation conditions but about 0.6 cm in mold evacuation condition of 710 torr due to the easier removal of pyrolsis product of EPS. And hot melt barrier thickness of 0.6 mm increased the reaction zone layer thickness up to about 2.5 cm. The fluidity decreased remarkably with an enlarged thickness of hot melt due to a lot of pyrolysis products.

• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.427-431
• /
• 2012

The $TiO_2$ foam synthesized using freeze-casting is a promising photocatalyst and photovoltaic electrode for a variety of energy applications, because the freeze-casting technique is easy to use, cheap, and suitable for mass-production. Despite its several advantages, little scientific information is available on the processing and morphology of the $TiO_2$ foams processed by freeze-casting. In particular, no systematic study has been performed on the microstructural evolution and morphological change of the rutile-phase $TiO_2$ foams during sintering. Therefore, in the present study, several $TiO_2$ foam samples were produced using the freeze-casting technique, which were then sintered at a relatively high temperature of $1200^{\circ}C$ for 1, 2, and 4 h to compare the morphological changes in the microstructure and to understand the effects of processing parameters of the rutile-phase $TiO_2$ foams. The foam ligament size increased near linearly with increasing sintering time whereas the average pore size decreased only slightly with increasing sintering time, with changes in particle morphology from sphere to rod and complete phase transformation from anatase to rutile.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.6
• /
• pp.469-475
• /
• 2016

In this work, casting processes, such as filling and solidification, were simulated in order to accurately predict volume shrinkage defects in large-sized sand gravity casting. Turbulent flow of melted materials and a difference of solidification speed can cause volume shrinkage defects. In order to solve this problem and to understand the phenomenon, a porous filter application was studied. Two different porosities of 10 and 20 p.p.i filters were introduced into the gating system, and in view of the results so far achieved, the defect was dramatically reduced by 22%, compared to that without the use of the filter.