• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.216-220
• /
• 2000

AC Superconducting Generators (ACSG) are featured by 3D magnetic flux distribution, which decreases in the direction of axis. For this reason, when ACSG is optimal designed, 3D magnetic field analysis is required. This paper proposes 2D Finite Element Analysis (FEA) results normalized by 3D FEA according to the position of armature coil and the ratio of field coil width to axial length in order to reduce the analysis time. By using the proposed data, the reasonable 3D FEA results of ACSG can be only predicted by 2D FEA results. The validity of the 3D FEA results is verified by comparison with the experimental results of 30kVA superconducting synchronous generator.

• 한국수자원학회논문집
• /
• 제48권1호
• /
• pp.9-21
• /
• 2015

본 연구는 소옥천 호소화 수역의 퇴적물 깊이별 오염도를 조사하고, 표층 퇴적토양을 대상으로 인 용출특성을 실험한 것이다. 퇴적물의 총인 농도는 전 구간에서 대청호 준설 환경기준 1.5mg/g을 초과하였고, T-N은 팔당호 준설기준 1.1 mg/g은 초과하였으나 대청호 준설기준 3.0mg/g보다는 낮게 나타났다. 준설구역은 소옥천 추소수역(WS-6~WS-12)이 적절하다고 판단하였다. 퇴적물 깊이별 오염도 조사 결과 강열감량은 깊이에 따라 낮아지는 경향을 보였고, 총질소는 깊이에 따른 농도 분포 패턴은 나타나지 않았다. 총인 역시 지점과 깊이별로 농도 변이가 적고 특별한 경향성을 보이지 않았다. 소옥천 호저 퇴적물에서 총인의 용출률은 혐기성 조건에서 $7.2{\sim}15.4mg/m^2/d$, 호기성 조건에서는 $0.5{\sim}2.0mg/m^2/d$, 통기성 조건에서는 $2.0{\sim}4.1mg/m^2/d$의 범위로 산정되었다. 혐기성 조건에서 퇴적 표토층의 총인 농도와 용출률의 관계는 결정계수($R^2$)가 0.7871로 나타나 정상관성을 보이고 있다. 또 반응조의 용존산소 농도와 총인 용출률의 관계는 결정계수($R^2$)가 0.8824인 높은 역상관성을 보였다. 퇴적물의 오염도와 반응조건에 따라 용출률이 크게 다르다는 것을 알 수 있었으며, 추소수역에 대한 수중 용존산소 농도 및 퇴적 표토층의 총인 함량과 총인 용출률과의 관계를 해석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.898-904
• /
• 2016

In this study, we have dealt with a design characteristic of outer-rotor type permanent magnet (PM) motor applied for Engine Cooling Fan (ECF). When we design a motor with structure like this type, it is required as a requisite to consider 3-Dimensional (3-D) effect by implementing a non-linear Finite Element Analysis (FEA) due to a yoke-ceiling, which is perpendicular to the axis of rotation. We have analyzed identical models under three different conditions. The analysis has been performed through a non-linear 2-Dimensional (2-D) and 3-D FEA. Finally, the results have been compared with Back Electro-Motive Force (BEMF) value of actual motor model. As a result, a yoke-ceiling function as an additional flux path and the operating point on B-H curve of rotor material is shifted to non-saturation region relatively. Accordingly, magnetic flux linkage can be increased and motor size can be decreased under same input condition to satisfy ECF specification, such as torque.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.27-31
• /
• 2002

MgB$_2$samples have been prepared by a stoichiometry mixture of Mg and B inside stainless steel tubes(Commercial Stainless Steel Tube Enveloping Technique). XRD data show that there are no second phases like MgO. The transition temperature of specimens is 37.5 K with a sharp transition width of ΔTc within 1K. From magnetic hysteresis measurement, flux jump was shown up to 15K, which was higher than that of samples by other methods. We have concluded that the flux jump is mainly affected by impurities and second phases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1340-1345
• /
• 2004

Convective boiling heat transfer coefficients of R-22 were obtained in a flat extruded aluminum tube with $D_h=1.41mm$ . The test range covered mass flux from 200 to 600 $kg/m^2s$, heat flux from 5 to 15 $kW/m^2$ and saturation temperature from $5^{\circ}C$ to $15^{\circ}C$ . The heat transfer coefficient curve shows a decreasing trend after a certain quality(critical quality). The critical quality decreases as the heat flux increases, and as the mass flux decreases. The early dryout at a high heat flux results in a unique 'cross-over' of the heat transfer coefficient curves. The heat transfer coefficient increases as the mass flux increases. At a low quality region, however, the effect of mass flux is not prominent. The heat transfer coefficient increases as the saturation temperature increases. The effect of saturation temperature, however, diminishes as the heat flux decreases. Both the Shah and the Kandlikar correlations underpredict the low mass flux and overpredict the high mass flux data.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권3호
• /
• pp.148-157
• /
• 2004

Convective boiling heat transfer coefficients of R-22 were obtained in a flat extruded aluminum tube with $D_h=1.41mm$. The test range covered mass flux from 200 to $600kg/m^{2}s$, heat flux from 5 to $15kW/m^2$ and saturation temperature from $5^{\circ}C\;to\;15^{\circ}C$. The heat transfer coefficient curve shows a decreasing trend after a certain quality (critical quality). The critical quality decreases as the heat flux increases, and as the mass flux decreases. The early dryout at a high heat flux results in a unique 'cross-over' of the heat transfer coefficient curves. The heat transfer coefficient increases as the mass flux increases. At a low quality region, however, the effect of mass flux is not prominent. The heat transfer coefficient increases as the saturation temperature increases. The effect of saturation temperature, however, diminishes as the heat flux decreases. Both the Shah and the Kandlikar correlations un-derpredict the low mass flux and overpredict the high mass flux data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.333-336
• /
• 1988

This paper is presented the two dimensional flux distribution analysis of a double sided linear induction moter with the end effects and the transeverse edge effects, which is caused by the finite length and width of the stator iron. The results are expected to be used to increased the understanding of DLIM characteristics and design

• 한국전산유체공학회지
• /
• 제12권1호
• /
• pp.43-52
• /
• 2007

A comparative study on flux functions for the 2-dimensional Euler equations has been conducted. Explicit 4-stage Runge-Kutta method is used to integrate the equations. Flux functions used in the study are Steger-Warming's, van Leer's, Godunov's, Osher's(physical order and natural order), Roe's, HLLE, AUSM, AUSM+, AUSMPW+ and M-AUSMPW+. The performance of MUSCL limiters and MLP limiters in conjunction with flux functions are compared extensively for steady and unsteady problems.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.36-40
• /
• 2006

A comparative study on flux functions for the 2-dimensional Euler equations has been conducted. Explicit 4-stage Runge-Kutta method is used to integrate the equations. Flux functions used in the study are Steger-Warming's, van Leer's. Godunov's, Osher's(physical order and natural order), Roe's, HILE, AUSM, AUSM+ and AUSMPW+. The performance of MUSCL limiters and MLP limiters in conjunction with flux functions are compared extensively for steady and unsteady problems.

• 한국철도학회논문집
• /
• 제12권3호
• /
• pp.437-442
• /
• 2009

선형유도전동기와 같은 속도기전력을 포함하는 운동자계 문제를 Galerkin 법을 이용하는 FEM으로 해석할 경우, Peclet Number의 값에 따라 해가 오실레이션 할 수 있으므로 해의 안정성이 떨어지게 되며, 더불어서 2차측 Back-Iron에서 자속이 외부와 쇄교하지 못하고 내부에서 맴도는 자속 맴돌이 현상이 발생하게 된다. 이 경우, 일반적으로 Up-Wind 기법을 이용하여 자속의 맴돌이 현상을 해결하게 되는데, 범용 S/W Tool(Maxwell 2D)의 경우 Up-Wind 기법을 적용하기가 힘들다. 따라서 본 논문에서는 Peclet Number 값에 따른 선형유도전동기의 2차측 Back-Iron에서 발생하는 자속의 맴돌이 현상을 살펴보고, 자속의 맴돌이 현상이 선형유도전동기의 동특성에 어떠한 영향을 끼치는지를 분석하였다.