• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.6
• /
• pp.538-544
• /
• 1985

This study was carried cut to evaluate the water quality of spring waters in Pusan area(see Fig. 1). In this experiment, twenty-five water samples were collected from 5 stations from December 1983 to August 1984. Range and mean values of constituents of the samples are as follows: pH $5.80{\sim}7.25$, 6.60; water temperature $6.0{\sim}23.0^{\circ}C,\;12.9^{\circ}C$; total residue $33.0{\sim}325mg/l$, 121.2mg/l; alkalinity $4.75{\sim}51.6mg/l$, 24.1mg/l; hardness $9.47{\sim}85.0mg/l$, 30.3mg/l; electrical conductivity $0.495{\sim}2.750{\times}^2{mu}{\mho}/cm,\;1.239{\times}10^2{\mu}{\mho}/cm$;turbidity $0.54{\sim}7.80$NTU, 2.04NTU; $KMnO_4$ consumed $0.51{\sim}8.47mg/l$, 1.96mg/l; chloride ion $4.91{\sim}36.0mg/l$, 12.55mg/l; fluoride ion ND-0.30ppm, 0.08ppm; nitrate-nitrogen ND-8.94mg/l, 1.94m:g/l; nitrite-nirogen ND-0.10mg/l, 0.03mg/l; ammonia-nitrogen ND-0.16mg/l, 0.03mg/l: phosphate-phosphorus ND-0.09mg/l, 0.03mg/l; silicate-silicious $0.42{\sim}22.7ng/l$, 7.96mg/l; copper ND-10.5ppb, 2.46ppb; lead ND-22.7ppb, 3.54ppb; zinc ND-103ppb, 21.33ppb; iron $20.3{\sim}2,800ppb$, 801.72ppb, respectively. Arsenic, cyan, cadmium, manganese, mercury, chrome and phenol were not detected. Total residue, electrical conductivity, turbidity and chloride ion of station 1 (Milrakdong) were higher than others as 178.1mg/l, $2.127{\times}10^2{\mu}{\mho}/cm$, 3.16NTU and 16.32mg/l. The concentration of silicious had a great influence on precipitation. The concentration of fluoride ion of spring waters was lower as 0.08ppm than the criterion for drinking water as 1ppm, while iron was exceed 2.7 times as 801.72ppb.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.108-116
• /
• 2004

In this study, the pore-filled ion-exchange membranes were prepared by using the asymmetric PVDF membrane as a nascent membrane. First, the solution of PVBCI having the chlorornethylate aryl ring of 80 percents and DABCO was made with the mixed solvent of THF and DU (8:2). These mixed solution was then, filled in the pores of PVDF membrane, and left for a day to complete the gelation. Finally the pore-filled anion-exchange membrane is obtained fallowed by the amination of the remaining chloromethyl groups with trimethylamine (TMA, 40 wt% in water) forming the positive ammonium ion sites. This 2 step procedure enabled us to produce the pore-filled membranes without change of size, and to control the properties of final membrane with various degree of cross-linking. The results of SEM and AFM showed the polyelectrolyte existed in the pores of nascent membrane as a certain configuration. From the investigation of the solvent affecting much to the permeability and rejection, it was found that the membranes using mixed solvent of THE and DMF (8:2) showed better performances than the membranes produced by THF only. The result of an investigation for the water permeability of the final membrane at low pressure (100 Kpa) showed a typical ultrafiltration membrane's permeability (8 ∼ 10 kg/$m^2$hr) and good values of rejection (55∼60 percent).

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.63-68
• /
• 1995

For the preparation of pH-selectrode, tribenzylamine, polyvinylchloride, dioctylphthalate, sodium tetraphenylborate and tetrahydrofuran were mixed with 0.02, 0.62, 1.34, 0.02g and 10ml respectively, and added 1g of acetylene black, graphite, silicon carbide or tungsten carbide respectively to improve electric conductivity. The selectrodes of seven kinds were shown linear to hydrogen ion in the range of pH 2 and 9. The best electric conductor for preparation of pH-selectrode based on tribenzylamine as neutral carrier was acetylene black and responded potential of the selectrode to hydrogen ion was shown the values near to theoretical Nernstian slope at $20^{\circ}C$. The interfering effects of the selectrode on hydrogen ion in the presence of alkali and alkaline earth metal ions were shown the better results with less error than glass electrode. The reproducibility and stability were good for use as a selectrode, especially in the presence of fluoride ion.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1445-1449
• /
• 2006

Molecular tweezers based on chenodeoxycholic acid bearing different lengths of arm were synthesized andtheir anion binding affinities were evaluated by $^1H$ NMR, isothermal calorimetric titration, and ESI mass spectrometry. Molecular tweezer 6 showed a high selectivity toward $H_2PO_4\;^-$ over $Cl^-,\;Br^-,\;I^-, $ and $CH_3CO_2\;^-$ by $^1H$ NMR titration, whereas the association constant for $F^-$ revealed the largest value as determined by ITC. The selectivity of 6 towards $F^-$ was about 103 times higher than that of $Cl^-,\;H_2PO_4\;^- $, and $CH_3CO_2\;^-$. ITCexperiment of 6 with $F^-$ in a DMSO showed two binding modes; two sequential association constants $K_1\;=\;2.77\;{\times}\;10^5\;M^{-1}$ and $K_2\;=\;8.68\;{\times}\;10^6\;M^{-1}$ were found. These sequential bindings were confirmed by ESI massspectrometry. 1 : 1 and 1 : 2 complexes of 6 and $F^-$ were found at m/z 868.08 and 884.04.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.3 no.1
• /
• pp.3-14
• /
• 2017

Nucleophilic aromatic fluorination has been one of the most explored methods in fluorin-18 based radiochemistry. Unlike electrophilic $[^{18}F]$fluorination methods, no-carrier-added nucleophilic radiofluorination with cyclotron-produced $[^{18}F]$fluoride ion offers better specific radioactivity which is essential aspect to obtain good quality images from positron emission tomography. Contrary to amenable aliphatic radiofluorination, the development of reliable aromatic $[^{18}F]$fluorination methods has been pursued by many research groups; however, no viable method has yet been established. Recently, hypervalent iodine compound draws increasing attention as versatile radiolabeling precursor for various $[^{18}F]$fluoroarenes, since it bears the capacity to introduce fluorine-18 either on electron-deficient or electron-rich aryl ring with enhanced regiospecificity. Other classes of hypervalent iodine congeners often utilized in radiochemistry are iodylarenes, iodonium ylides, and spirocyclic iodonium ylides. Recently developed spirocyclic iodonium ylides have already been avidly employed to provide various $[^{18}F]$aryl fluorides with high labeling efficiency. This metal-free protocol would afford efficient routes, replacing the traditional approaches to $[^{18}F]$fluoroarenes, from prosthetic labeling synthons to complex PET radiotracers.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.469-474
• /
• 1999

Thermoactinomyces sp. E79 produced two types of thermostable alkaline proteases extracellularly. A minor protease was separated from a major protease by using DEAE-column chromatography. This enzyme was purified to homogeneity by ammonium sulfate and DEAE-Sepharose ion-exchange chromatography. The purified minor protease showed different biochemical properties compared to the major protease. The molecular mass of the purified enzyme was estimated by SDS-PAGE to be 36 kDa. Its optimum temperature and pH for proteolytic activity against Hammarsten casein were $70^{\circ}C$ and 9.0, respectively. The enzyme was stable up to$75^{\circ}C$ and in an alkaline pH range of 9.0-11.0. The enzyme was inhibited by phenylmethylsulfonyl fluoride (PMSF) and $Hg^{2+}, indicating that the enzyme may be a cysteine-dependent serine protease. In addition, the enzyme cleaved the endoproteinase substrate, succinyl-Ala-Ala-Pro-Phe-p- nitroanilide, and the $K_m$ value for the substrate was 1.2 mM.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.5 no.2
• /
• pp.145-151
• /
• 2019

Fluorine-18 is considered to be the radionuclide of choice for positron emission tomography (PET). Thus, the development of small molecule-based radiopharmaceuticals for use in diagnostic imaging relies heavily on efficient radiofluorination techniques. Until the early 2000s, diaryliodonium salts and aryliodonium ylides were widely employed as labeling precursors to yield aromatic PET radiotracers with cyclotron-produced [¹⁸F]fluoride ion. Rapid recent progress in the development of efficient borylation methods has led to a paradigm shift in ¹⁸F-labeling methods. In addition, deoxyfluorination has attracted a great deal of interest as an alternative approach to aryl ring activation with ¹⁸F^-. In this review, methods for radiolabel development are discussed with a specific focus on the progress made in the last 5 years. Other interesting ¹⁸F-based protocols are also briefly introduced. New methods for exploiting ¹⁸F^- are expected to increase the number of ¹⁸F-labeling methods, to allow applications in a range of chemical environments.

• Journal of Microbiology
• /
• v.40 no.1
• /
• pp.20-25
• /
• 2002

An extracellular PHB depolymerase was purified from P. simplicissimum LAR13 cultural medium by Sepharose CL-6B chromatography. When the fungus was grown in a basal salt medium with poly(3-hydroxybutyrate) (PHB) as the sole carbon source, PHB depolymerase production reached maximum at its stationary phase. The mycelial growth rate was higher at 37$^{\circ}C$ than at 30$^{\circ}C$ and even higher than at 25$^{\circ}C$, However, the enzyme production was lower at 37$^{\circ}C$ than 30$^{\circ}C$ or 25$^{\circ}C$. The isolated enzyme is composed of a single polypeptide chain with a molecular mass of about 36 kDa as determined by SDS-PAGE. The optimum conditions for the enzyme activity are pH 5.0 and 45$^{\circ}C$. The enzyme was stable for 30 min at a temperature lower than 50$^{\circ}C$, and stable at pH higher than 2.0 but it was unstable at pH 1.0.1 mM Fe$\^$2+/ reduced the enzyme activity by 56% and the enzyme was inhibited almost completely by 4 mM Fe$\^$2+/ . The enzyme was partially inhibited by phenylmethylsulfonyl fluoride and was very sensitive to diazo-DL-norleucine methyl esters dithiothreitol and mercuric ion. However, N-p - tosyl - L - Iysinechloromethyl ketone, p -hydroxymercuricbenzoate and N- acetylimidazole had no influence upon its activity.

• Textile Coloration and Finishing
• /
• v.4 no.2
• /
• pp.76-83
• /
• 1992

Wool tropical and nylon taffeta were treated with low temperature plasma of $O_2$, $N_2$, NH$_3$, CF$_4$ and CH$_4$ for the intervals of 10 to 300 sec, and then dyed with leveling and milling type acid dyes in presence or absence of buffer solution. From the color depth of dyed fabrics, effect of plasma gases, treated time, dyeing time and temperature on dyeing property was studied. The results of the experiment can be summarized as follows: 1) The plasma treatments except methane gas increased the color depth of dyed wool fabrics, but not that of dyed nylon fabrics regardless of the plasma gases used. 2) The color depth of wool fabrics dyed in the dye bath without buffer solution was increased by the low temperature plasma, especially increased much more by CF$_4$ plasma treatment. It is found that with the identification of F- ion in the residual dye bath the hydrogen fluoride gas was adsorbed on wool fabrics in the plasma treatment. 3) The color depth of wool fabrics was increased with the time of $O_2$ and CF$_4$ plasma treatments. 4) In both cases of the leveling and milling type acid dyes, the rate of dyeing was increased in the low temperature plasma treatments, and it is found that the leveling type acid dye increased the color depth at relatively low temperature below 4$0^{\circ}C$, compared with the milling type acid dye.

• Journal of Powder Materials
• /
• v.22 no.5
• /
• pp.315-320
• /
• 2015

The present work reports a systematic study of using carboxymethylated cellulose (CMC) as water-borne binder to produce $Li_4Ti_5O_{12}$-based anodes for manufacture of high rate performance lithium ion batteries. When the LTO-to-CB-to-CMC mass ratio is carefully optimized to be 8:1:0.57, the special capacity of the resulting electrodes is $144mAh{\cdot}g^{-1}$ at 10 C and their capacity retention was 97.7% after 1000 cycles at 1 C and 98.5% after 500 cycles at 5 C, respectively. This rate performance is comparable or even better than that of the electrolytes produced using conventional, organic, polyvinylidene fluoride binder.