• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.63-68
• /
• 1998

The fluidity of high flowing concrete can be affected by numerous parameters which characterize either the cement of the admixture. The reactivity of a cement as determined by its chemical composition(especially its $C_3$A content), its fineness and its content in sulfates and alkalies obviously plays a key role in rheology of high flowing concrete in fresh state. Specific properties of high range water reducing AE agent used to enhance the workability of high flowing concrete also exert important influence. The purpose of this experimental study is to investigate and analyze the effect of cement and high range water reducing AE agent in fluidity, setting, compressive strength of high flowing concrete. As a result, we found that fluidity of high flowing concrete is affected greatly by kind of cement and high range water reducing AE agent, also, there is harmonic character between high belite cement and polycarbonic acid high range water reducing AE agent.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.313-323
• /
• 1998

Fluidity retention of concrete used high range water reducing AE agent(HWAE) is varied according to main component, dosage amount and dosing method of HWAE. The type and substitution ratio of mineral admixture also have influence on the fluidity retention of concrete used HWAE. In this study, for the purpose of improving the fluidity retention in concrete used HWAE. 3 types of HWAE and ground granulated blast furnace slag(SG) are used in cement paste, mortar and concrete varing dosage amount and dosing time of HWAE and substitution ratio of SG respectively. According to using the HWAE of naphthalene sulfonates and SG, the fluidity retention of mortar and concrete is improved remarkably. And after 30 min, dosing method of HWAE is very effective in improving the fluidity retension and strength of concrete regardless of type of HWAE.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.293-296
• /
• 2001

This paper presents the results of field application test on the manufacturing of high fluidity concrete by applying flowing methods with segregation reducing type superplasticizer. Base concrete is made with 20% of fly ash, which is flowed during the transportation. According to test results, fluidity, placeability and segregation reducing performance meet the range of high fluidity concrete after flowing, while air loss occurs due to fly ash. There are no noticeable differences in compressive strengths between non-compacting and compacting methods. According to non-destructive tests with rebound and core strength test, we cannot detect any differences in strength according to the height in the structures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.801-804
• /
• 2006

Polycarboxylate type superplasticizers(PC) have got widely used for making not only high performance concrete but low grade concrete as well. It is known that fluidity of cement with PC is affected by the characteristics of cement especially sulphate ion concentration and hydration activity. But the characteristics of PC also affect the fluidity. The fluidity of cement mortar with various types of PC was measured and critical dosage(CD) and dispersing ability(DA) was calculated. CD and DA is strongly dependent on the type of PC. And the variation of fluidity on time was affected by the type of PC also. So, it is advisable to investigate the property of PC before production of concrete and adjust it to meet the requirements of concrete depending on the materials, the time of transport and so on.

• Journal of the Korea Concrete Institute
• /
• v.12 no.2
• /
• pp.79-87
• /
• 2000

The strength development of concrete is influenced by temperature and cement type which greatly affect hydration degree of cement. There is not pertinent concrete strength management methods for estimating the in-place strength of concrete. One such method is the maturity concept. The maturity concept is based on the fact that concrete gains strength with time as a result of the cement hydration and, thus the rate of hydration, as in any chemical reaction, depends primarily on the concrete temperature during hydration. Thus, the strength of concrete is function of its time-temperature history. This goals of the present study are to investigate a relationship between strength of high-fluidity concrete and maturity that is expressed as a function of an integral of the curing period and temperature, predict strength of concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.51-52
• /
• 2015

In this study, the concrete in which the hybrid fiber with different volume and rate was intermixed in high fluidity concrete. However, Fiber Ball is frequently caused by the decrease in the dispersion of the fiber. The research has been conducted primarily study of single fiber or hybrid fiber, such as different length of single fiber. Therefore, we investigate the mechanical properties of concrete was mixed with a combination of various fibers been produced domestically. Its purpose being to provide basic data for evaluating the impact hybrid fibers on the fluidity of concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.262-263
• /
• 2014

The purpose of this study was to investigate properties of high fluidity concrete adding waste marble powder. A change in the replacement ratios of waste marble powder was measured compressive strength and slump flow, O-Lot and U-Box. Waste marble powder has replaced binder of high fluidity concrete at certain contents of 0~20%. As a results, Slump flow, O-Lot and U-box adding waste marble powder up to 10% have increased by adding waste marble powder. As the concrete with a replacement ratio of waste marble powder up to 10% was found to have a compressive strength superior to that of plain.

• Computers and Concrete
• /
• v.13 no.5
• /
• pp.649-657
• /
• 2014

In this paper, effects of magnetic water on different properties of cement paste including fluidity, compressive strength, time of setting and etc, has been studied in concrete laboratory of Sahand University of Technology. For production of magnetic water, three devices including an AFM called device(made in UAE), a device marked AC(made in Germany) and finally a device was designed and made in Concrete Laboratory of Sahand University of Technology) have been used. The results show that, intensity and direction of magnetic field, velocity and time of water passing through magnetic device, and amount and type of Colloidal particles have direct effects on properties of magnetic water and using such a water in making cement paste, increases its fluidity and compressive strength up to 10%.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.457-462
• /
• 2010

In this research, the effects of the concrete superplastizers on the wettability of cement particle and concrete strength were studied. The wettability of the cement particles strongly depended on the type of the superplastizer. When the superplastizer had a higher wettability with the cement particles, it revealed a good fluidity of the concrete mortar and a higher concrete strength. Non-ionic superplastizers (polycarboxylic type) had a relatively good performance on the mortar fluidity and concrete strength properties compared to anionic superplastizers (lignosulfate, sulfonated naphthalene formaldehyde, sulfonated melamin formaldehyde). It was observed that the blending of the polycarboxylic and the lignosulfate type concrete superplastizers resulted in synergistic effects on the concrete mortar fluidity and concrete strength properties.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.125-136
• /
• 2022

This research is to reduce the formwork leakage of high-fluidity concrete caused by insufficient accuracy of formwork fabrication widely used for high-fluidity concrete to general strength concrete. However, in the actual construction site, because of the insufficient accuracy of formwork fabrication may cause leaking concrete of mortar through a gab of the formwork. Therefore, in this research, which builds on previous research into providing thixotropy with PVA and Borax, the use of thixotropy to reduce high-fluidity mortar leakage was evaluated. The results of the experiment proved that the use of thixotropy with PVA and Borax can contribute to reduction of the formwork leakage of high-fluidity mortar. This finding is expected to lead to further research on reducing leakage of high-fluidity concrete.