• Title/Summary/Keyword: Fluid Measure

Search Result 473, Processing Time 0.023 seconds

Effects of dietary cation and anion difference on eating, ruminal function and plasma leptin in goats under tropical condition

  • Nguyen, Thiet;Chanpongsang, Somchai;Chaiyabutr, Narongsak;Thammacharoen, Sumpun
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.6
    • /
    • pp.941-948
    • /
    • 2020
  • Objective: This study was carried out to determine the effects of elevated dietary cation and anion difference (DCAD) on dry matter intake (DMI) and ruminal fermentation pattern in lactating dairy goats under tropical conditions. Methods: Ten dairy goats were divided into two groups of five animals each. The groups received diets at different DCAD levels, either a control diet (22.81 mEq/100 g dry matter [DM], DCAD-23) or a DCAD-39 diet (39.08 mEq/100 g DM, DCAD-39). After parturition, DMI and water intake were recorded daily. Ruminal fluid and urine were collected, and nutrient digestibility measurements were carried out at 8th weeks postpartum (PP-8). Blood samples were collected at PP-4 and PP-8 to measure plasma leptin. Results: Dry matter intake/body weight (DMI/BW) at PP-8 of the animals fed the DCAD-39 diet was significantly higher than those fed with DCAD-23 diet (p<0.05). Animals fed with DCAD-39 consumed more water than those fed DCAD-23 over 24 h, particularly at night (p<0.05). Ruminal pH, acetate concentration, and urinary allantoin excretion increased with the DCAD-39 diet, whereas ruminal butyrate concentration was lower with the DCAD-39 diet. On the other hand, other ruminal parameters, such as total volatile fatty acid concentration, propionate molar proportion and acetate/propionate average ratio, were not affected by increased DCAD supplementation. Apparent digestibility was improved by increased DCAD supplementation. Plasma leptin concentration was higher with DCAD supplementation. Conclusion: When feeding goats with DCAD-39 under tropical conditions, an increase in DMI was associated with improved apparent digestibility of nutrients, ruminal fermentation and microbial protein synthesis. An increase in plasma leptin concentration could not explain the effect of high DCAD on DMI.

The Ratios of Pre-emulsified Duck Skin for Optimized Processing of Restructured Ham

  • Shim, Jae-Yun;Kim, Tae-Kyung;Kim, Young-Boong;Jeon, Ki-Hong;Ahn, Kwang-Il;Paik, Hyun-Dong;Choi, Yun-Sang
    • Food Science of Animal Resources
    • /
    • v.38 no.1
    • /
    • pp.162-171
    • /
    • 2018
  • The purpose of this study was to investigate the quality of duck ham formulated with duck skin through the pre-emulsification process. The experiments to investigate the quality characteristics of duck ham were carried out to measure proximate composition, cooking loss, emulsion stability, pH, color, texture profile analysis, apparent viscosity, and sensory characteristics. Duck ham was prepared with various ratios of duck skin in pre-emulsion as follows: Control (duct skin 30%), T1 (duck skin 20% + pre-emulsified duck skin 10%), T2 (duck skin 15% + pre-emulsified duck skin 15%), T3 (duck skin 10% + pre-emulsified duck skin 20%), and T4 (pre-emulsified duck skin 30%). As the ratio of duck skin to pre-emulsified skin changed, the quality of duck ham in terms of moisture content, fat content, cooking loss, emulsion stability, lightness, textural analysis, apparent viscosity, and overall acceptability changed. The moisture content of T2 was the highest (p<0.05) and that of the control and T4 was the lowest (p<0.05). The fat content of control was higher than all treatments (p<0.05). T2 had the lowest values in cooking loss, total expressible fluid, fat separation, hardness, springiness, and gumminess (p<0.05). The score of overall acceptability of all treatments with pre-emulsified skin was higher than control (p<0.05). Therefore, the pre-emulsification process can improve the quality characteristics of duck ham and 1:1 ratio of duck skin and pre-emulsified skin was the proper ratio to improve the quality characteristics of duck ham.

Effect of feeding garlic leaves on rumen fermentation, methane emission, plasma glucose kinetics, and nitrogen utilization in sheep

  • Panthee, Arvinda;Matsuno, Ayana;Al-Mamun, Mohammad;Sano, Hiroaki
    • Journal of Animal Science and Technology
    • /
    • v.59 no.6
    • /
    • pp.14.1-14.9
    • /
    • 2017
  • Background: Garlic and its constituents are reported to have been effective in reducing methane emission and also influence glucose metabolism in body; however, studies in ruminants using garlic leaves are scarce. Garlic leaves contain similar compounds as garlic bulbs, but are discarded in field after garlic bulb harvest. We speculate that feeding garlic leaves might show similar effect as garlic constituents in sheep and could be potential animal feed supplement. Thus, we examined the effect of freeze dried garlic leaves (FDGL) on rumen fermentation, methane emission, plasma glucose kinetics and nitrogen utilization in sheep. Methods: Six sheep were fed Control diet (mixed hay and concentrate (60:40)) or FDGL diet (Control diet supplemented with FDGL at 2.5 g/kg $BW^{0.75}$ of sheep) using a crossover design. Methane gas emission was measured using open-circuit respiratory chamber. Plasma glucose turnover rate was measured using isotope dilution technique of [$U-^{13}C$]glucose. Rumen fluid, feces and urine were collected to measure rumen fermentation characteristics and nitrogen utilization. Result: No significant difference in rumen fermentation parameters was noticed except for rumen ammonia tended to be higher (0.05 < P < 0.1) in FDGL diet. Methane emission per kg dry matter ingested and methane emission per kg dry matter digested were lower (P < 0.05) in FDGL diet. Plasma glucose concentration was similar between diets and plasma glucose turnover rate tended to be higher in FDGL diet (0.05 < P < 0.1). Nitrogen retention was higher (P < 0.05) and microbial nitrogen supply tended to be higher (0.05 < P < 0.1) in FDGL diet. Conclusion: FDGL diet did not impair rumen fermentation, improved nitrogen retention; while absence of significant results in reduction of methane emission, glucose turnover rate and microbial nitrogen supply, further studies at higher dose would be necessary to conclude the merit of FDGL as supplement in ruminant feedstuff.

Comparison of in vitro ruminal fermentation incubated with different levels of Korean corn grains with total mixed ration as a basal

  • Hamid, Muhammad Mahboob Ali;Park, Ha Young;Choi, Chang Weon
    • Korean Journal of Agricultural Science
    • /
    • v.45 no.3
    • /
    • pp.419-427
    • /
    • 2018
  • The present study was conducted to investigate the effect of different levels of Korean corn grain on in vitro ruminal fermentation with total mixed ration (TMR) as a basal feed. Three ruminal cannulated Holstein steers (Body Weight $479{\pm}33.0kg$) were used as rumen fluid donors. Treatments for in vitro fermentation were TMR only (control, 3.0 g), TMR substituted partially with high level (HC, TMR 1.5 and corn 1.5 g), and with low level of Korean corn grain (LC, TMR 2.25 and corn 0.75 g), respectively. To measure in vitro ruminal pH, gas production, ammonia N and volatile fatty acids (VFA), the in vitro fermentation incubation was triplicated at $39^{\circ}C$, 120 rpm for 0, 1, 3, 6, 12, 24 and 48 h, respectively. Mean ruminal pH was significantly lower (p < 0.05) for HC than control. Changes in rumen pH was rather similar between the groups till 6 h after incubation, but the lowest pH for HC (pH 5.10) appeared at 48 h compared with control and LC. Total gas production was tended (p < 0.09) to be higher and ammonia N was significantly lower (p < 0.05) for HC than control and LC. Total VFA was higher (p < 0.05) for HC and LC than control but no differences appeared between HC and LC. Overall, the present data indicate that feeding different levels of Korean domestic corn grain may lead to high and sustainable starch degradation in the rumen.

Effect of Tannin and Species Variation on In vitro Digestibility, Gas, and Methane Production of Tropical Browse Plants

  • Gemeda, Belete Shenkute;Hassen, A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.28 no.2
    • /
    • pp.188-199
    • /
    • 2015
  • Nineteen tanniferous browse plants were collected from South Africa to investigate their digestibility, gas production (GP) characteristics and methane production. Fresh samples were collected, dried in forced oven, and ground and analyzed for nutrient composition. In vitro GP and in vitro organic matter digestibility (IVOMD) were determined using rumen fluid collected, strained and anaerobically prepared. A semi-automated system was used to measure GP by incubating the sample in a shaking incubator at $39^{\circ}C$. There was significant (p<0.05) variation in chemical composition of studied browses. Crude protein (CP) content of the species ranged from 86.9 to 305.0 g/kg dry matter (DM). The neutral detergent fiber (NDF) ranged from 292.8 to 517.5 g/kg DM while acid detergent fiber (ADF) ranged from 273.3 to 495.1 g/kg DM. The ash, ether extract, non-fibrous carbohydrate, neutral detergent insoluble nitrogen, and acid detergent insoluble nitrogen and CP were negatively correlated with methane production. Methane production was positively correlated with NDF, ADF, cellulose and hemi-cellulose. Tannin decreased GP, IVOMD, total volatile fatty acid and methane production. The observed low methanogenic potential and substantial ammonia generation of some of the browses might be potentially useful as rumen manipulating agents. However, a systematic evaluation is needed to determine optimum levels of supplementation in a mixed diet in order to attain a maximal depressing effect on enteric $CH_4$ production with a minimal detrimental effect on rumen fermentation of poor quality roughage based diet.

Experimental Study on the Horseshoe Vortex Systems Around Surface-Mounted Obstacles (평판 위에 부착된 실린더 주위의 말굽와류 시스템에 관한 실험적 연구)

  • 양준모;유정열
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.16 no.10
    • /
    • pp.1979-1989
    • /
    • 1992
  • An experimental study has been performed to investigate the horseshoe vortex system formed around cylindrical obstacles mounted vertically on the surface over which a boundary layer is formed. To measure the mean velocity of the flow field, a five-hole Pitot tube has been used. In addition, surface static pressure measurements and surface flow visualization were also performed. From the five-hole probe measurements, vorticity distribution was deduced numerically and the streamwise velocity distribution was also examined. To consider the effect of the leading-edge shape on the formation of the horseshoe vortex, a qualitative comparison was made between the three-dimensional flows around a circular cylinder and a wedge-type cylinder. The five-hole probe measurements showed a single primary vortex which exists immediately upstream of the obstacles, and endwall flow visualization showed the existence of a corner vortex. As the vortex passes around the obstacle, the vortex strength is reduced and the vortex core moves radially outward. Due to this horseshoe vortex, the fluid momentum is found to decrease along the streamwise direction. Since the horseshoe vortex formed around a wedge-type cylinder has weaker strength and is confined to a narrower region than that around a circular, the possibility that the secondary flow loss due to the horseshoe vortex can be reduced through a change of the leading- edge shape is proposed.

Inhibitory Effects of Angelicae Dahuricae Radix Extract on COPD induced by Cigarette Smoke Condensate and Lipopolysaccharide in Mice (담배연기 응축물과 Lipopolysaccharide의 투여로 유발된 COPD에 대한 백지 추출물의 억제효과)

  • Kwak, Ho-Geun;Lim, Heung-Bin
    • Korean Journal of Medicinal Crop Science
    • /
    • v.19 no.5
    • /
    • pp.380-387
    • /
    • 2011
  • This study was carried out to investigate the inhibitory effect of Angelicae Dahuricae Radix (ADR) extract on chronic obstructive pulmonary disease (COPD) induced by cigarette smoke condensate (CSC) and lipopolysaccharide (LPS) in mice. COPD was induced by intratracheal instillation of LPS and CSC 5 times for 12 days; this increased airway hyperresoponsiveness (AHR) and inflammatory cells in bronchoalveolar lavage fluid (BALF). ADR extract was administered orally at a dose of 50 and 200 mg/kg. The concentration of imperatorin, a major component of ADR and therefore used as a measure of quality control, was $0.098%{\pm}0.018%$. Treatment of the mice with ADR extract (50 and 200 mg/kg) alleviated AHR and reduced inflammatory cell counts. Treatment with cyclosporin A (CSA; 10 mg/kg) also modulated AHR and reduced inflammatory cells effectively. Compared with CSA treatment, treatment with ADR (50 mg/kg) extract reduced neutrophil and $CD4^+/CD3^+$ cell counts by 22.67% and 44.92%, respectively. In addition, compared with CSA treatment, treatment ADR 200 mg/kg reduced neutrophils, $CD4^+/CD3^+$ cells and $CD8^+/CD3^+$ cells, by 32.10%, 83.17% and 82.11%, respectively. These results indicate that ADR extract may have an inhibitory effect on COPD induced by LPS and CSC in mice.

Measurement and Modeling of Bubble Points for Binary Mixtures of Carbon Dioxide and N,N-Dimethylformamide (이산화탄소와 디메틸포름아마이드 혼합물의 기포점 측정 및 모델링)

  • Jung, Joon-Young;Lee, Byung-Chul
    • Clean Technology
    • /
    • v.17 no.1
    • /
    • pp.19-24
    • /
    • 2011
  • The bubble point pressures of binary mixtures of carbon dioxide ($CO_2$) and N,N-dimethylformamide (DMF) were measured by using a high-pressure experimental apparatus equipped with a variable-volume view cell, at various $CO_2$ compositions in the range of temperatures above the critical temperature of $CO_2$ and below the critical temperature of DMF. The experimental bubble point pressure data were correlated with the Peng-Robinson equation of state (PR-EOS) to estimate the corresponding dew point compositions at equilibrium with the bubble point compositions. The experimentally measured bubble point pressures gave good agreement with those calculated by the PR-EOS. The variable-volume view cell equipment was verified to be an easy and quick way to measure the bubble point pressures of high-pressure compressible fluid mixtures.

Identification of Dynamic Stiffness of Squeeze Film Damper using Active Magnetic Bearing System as an Exciter (자기베어링 시스템을 가진기로 이용한 스퀴즈 필름 댐퍼의 동강성 계수 규명)

  • Kim, Keun-Joo;Lee, Chong-Won
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2002.11b
    • /
    • pp.381-387
    • /
    • 2002
  • In this work, the dynamic characteristics of an oil-lubricated, short SFD with a central feeding groove are derived based on a theoretical analysis considering the effect of a groove. The validity of the analysis is investigated experimentally using an Active Magnetic Bearing (AMB) system as an exciter. For the theoretical solution, the fluid film forces of a grooved SFD are analytically derived so that the dynamic coefficients of a SFD are expressed in terms of its design parameters. For the experimental validation of the analysis, a test rig using AMB as an exciter is proposed to identify the dynamic characteristics of a short SFD with a central groove. As an exciter, the AMB represents a mechatronic device to levitate and position the test journal without any mechanical contact, to generate relative motions of the journal inside the tested SFD and to measure the generated displacements during experiments with fairly high accuracy. Using this test rig, experiments are extensively conducted with different clearance, which is one of the most important design parameters, in order to investigate its effect on the dynamic characteristics and the performance of SFDs. Damping and inertia coefficients of the SFD that are experimentally identified are compared with the analytical results to demonstrate the effectiveness of the analysis. It is also shown that AMB is an ideal device for tests of SFDs.

  • PDF

Development of Quantitative Lymphedema Screening System to Monitor Change in Skin Elasticity through the Measurement of Indentation Force and Return Time (피부의 탄성변화에 따른 피부 가압과 복귀시간 측정을 통한 정량적 림프부종 진단 시스템 개발)

  • Seo, Jong Hyun;Cho, Chang Nho;Kim, Sung Chun;Chung, Seung Hyun;Koh, Eun Sil;Kim, Kwang Gi
    • Journal of Biomedical Engineering Research
    • /
    • v.34 no.4
    • /
    • pp.170-176
    • /
    • 2013
  • Lymphedema is a phenomenon in which fluid is accumulated inside tissues due to the damaged lymphatic systems. Lymphedema can cause complications such as lymphangitis, infection, changes in skin texture, fibrosis, and lymphangiosarcoma. In this study, a lymphedema screening system based on the elasticity of the skin is proposed to easily quantify lymphedema. The developed probe consists of touch sensors, a load cell and hall-effect sensors to measure the indentation force on the skin and the return time of the skin. The developed system can be used to estimate the change in the elasticity of the skin to quantify lymphedema. The system was tested with a thyroid phantom and gelatin phantoms of different concentrations and the resulting force and the time were recorded. It was found that the increase in the elasticity leads to a higher indentation force and shorter return time. This shows that the developed system can monitor the change in the skin elasticity by measuring the return time and the indentation force. The feasibility of the system in clinical applications will be evaluated in the future study.