• 동력기계공학회지
• /
• 제19권4호
• /
• pp.36-42
• /
• 2015

TMixed convective flow in a bottom heated and top cooled rectangular channel can be significantly affected by the channel aspect ratio, Prandtl number, Reynolds number, Rayleigh number and angle of inclination. In such a mixed convection, the flow pattern plays an important role in various technological processes. In this study, a numerical investigation is carried out to explore mixed convection in a three-dimensional rectangular channel with bottom heated and top cooled uniformly. The three-dimensional governing equations are discretized using the finite volume method. In the range of low Reynolds number($0{\leq}Re{\leq}9.6{\times}10^{-2}$), the effects of the aspect ratio($2{\leq}AR{\leq}12$) and Gr/Re are presented and discussed. The longitudinal roll number in the channel is increased with increasing aspect ratio, and the roll number induced, regardless of the aspect ratio number, is even in the range of aspect ratios between 2 and 12, New vortex flow structure containing inclined longitudinal rolls is found, which is affected by aspect ratio and Reynolds number. The ratio Gr/Re is used to check the relative magnitudes of forced and natural convection in the mixed convective flow of high viscous fluid.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.689-690
• /
• 2008

In the present study, a micro holographic PTV (HPTV) system was used to experimentally investigate the structure of 3D flow within a curved micro-tube with varying Dean number. The employed HPTV system incorporated a high-speed digital camera to measure the temporal evolution of the 3D velocity fields of micro-scale fluid flows. With increasing Dean number, flow in the curved tube is transformed from a steady flow to a secondary flow with two counter-rotating vortices. In this study, to analyze the 3D flow characteristics in the curved section of tube at a high Dean number, the trajectories of fluid particles were obtained experimentally using the whole 3D velocity field data obtained by the micro HPTV technique. The mean velocity field distribution was then obtained by ensemble averaging the instantaneous velocity fields. These results would be helpful in the design of various passages within micro-scale devices or micro-chips and in understanding the mixing phenomena that occur in curved conduits along the trajectories of fluid particles.

• 항공우주시스템공학회지
• /
• 제13권1호
• /
• pp.69-76
• /
• 2019

본 연구에서 복합재료 구조 설계를 위한 수지 이송 성형 공법의 수지 침투 유동 해석을 수행하였다. 대상 복합재료 구조물은 유체 저장 탱크 구조물이다. 유체 저장 탱크 복합재료 구조물 설계를 위해 자연 섬유 복합재료가 적용되었다. 자연섬유 복합재 구조의 제작을 위해 수지 이송 성형 공법을 채택하였다. 탱크의 적절한 RTM 조건을 도출하기 위하여 수지 침투 유동 해석을 수행하였다. 수지 유동 해석은 상용 유한 요소 해석 시뮬레이션 프로그램을 활용하여 수행하였다. 수지 주입구와 배출구의 다양한 변경에 따른 반복적 해석을 수행하여 최적의 수지 주입 시간과 위치를 결정하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제3권1호
• /
• pp.58-66
• /
• 2010

A steam control valve is used to control the flow from the steam generator to the steam turbine in thermal and nuclear power plants. During startup and shutdown of the plant, the steam control valve is operated under a partial flow conditions. In such conditions, the valve opening is small and the pressure deference across the valve is large. As a result, the flow downstream of the valve is composed of separated unsteady transonic jets. Such flow patterns often cause undesirable large unsteady fluid force on the valve head and downstream pipe system. In the present study, various flow patterns are investigated in order to understand the characteristics of the unsteady flow around the valve. Experiments are carried out with simplified two-dimensional valve models. Two-dimensional unsteady flow simulations are conducted in order to understand the experimental results in detail. Scale effects on the flow characteristics are also examined. Results show three types of oscillating flow pattern and three types of static flow patterns.

• 항공우주시스템공학회지
• /
• 제15권1호
• /
• pp.7-18
• /
• 2021

반능동형 MR댐퍼 착륙장치는 MR유체가 환형 유로를 지날 때 유체감쇠력 및 자장 제어 감쇠력을 발생시키는 댐퍼이다. 환형 유로를 지나는 MR 유체의 경우 필연적으로 불완전 발달 유동이 발생하게 되어, 이는 유체 감쇠력을 포함하는 댐퍼 내력 계산에 오차를 발생시키는 원인이 된다. 이로 인해 댐퍼 구조적 파라미터 설계 및 제어 이득 선정이 부정확해지며, 착륙장치의 동특성 및 충격흡수성능 저하를 초래하게 된다. 본 논문에서는 MR댐퍼 환형 유로의 입구영역에서 발생하는 추가적인 감쇠력을 고려한 MR댐퍼 착륙장치의 수학적 모델을 유도하였다. 본 논문에서 유도한 수학적 모델링을 MR댐퍼 착륙장치의 설계 및 최적화 과정에 적용한다면 좀 더 정확한 내력 예측으로 우수한 성능의 MR댐퍼 착륙장치를 설계할 수 있을 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제81권4호
• /
• pp.443-459
• /
• 2022

The paper studies the dispersion and attenuation of propagating waves in the "plate+compressible viscous fluid layer" system in the case where the fluid layer flow is restricted with a rigid wall, and in the case where the fluid layer has a free face. The motion of the plate is described by the exact equations of elastodynamics and the flow of the fluid by the linearized Navier-Stokes equations for compressible barotropic Newtonian viscous fluids. Analytical expressions are obtained for the amplitudes of the sought values, and the dispersion equation is derived using the corresponding boundary and compatibility conditions. To find the complex roots of the dispersion equation, an algorithm based on equating the modulus of the dispersion determinant to zero is developed. Numerical results on the dispersion and attenuation curves for various pairs of plate and fluid materials under different fluid layer face conditions are presented and discussed. Corresponding conclusions on the influence of the problem parameters on the dispersion and attenuation curves are made and, in particular, it is established that the change of the free face boundary condition with the impermeability condition can influence the dispersion and attenuation curves not only in the quantitative, but also in the qualitative sense.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1574-1579
• /
• 2004

A simultaneous measurement system that can analyze the flow-structure interactions(FSI) has been constructed and analyses on the flow field and the motion field of a floating cylinder was made. The three-dimensional vector fields around the cylinder are measured by 3D-PTV technique while the motion of the cylinder forced by the flow field is measured simultaneously with a newly developed motion tracking algorithm(bidirectional tracking algorithm). The cylinder is pendant in the working fluid of a water channel and the surface of the working fluid is forced sinusoidal to make the cylinder bounced. The interaction between the flow fields and the cylinder motion is examined quantitatively.

• 한국유체기계학회 논문집
• /
• 제13권2호
• /
• pp.48-53
• /
• 2010

A computerized design system of axial fan is developed for constructing 3-D blade geometry and predicting both aerodynamic performance and noise. The aerodynamic blading design of fan is conducted by blade angle distribution, camber line determination, airfoil thickness distribution and blade element stacking along spanwise distance. The internal flow and the aerodynamic performance of designed fan are predicted by the through-flow modeling technique with flow deviation and pressure loss correlations. Based on the predicted internal flow field and performance data, fan noise is predicted by two models for discrete frequency and broadband noise sources. The present predictions of the flow distribution, the performance and the noise level of actual fans are well agreed with measurement results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.53-59
• /
• 2004

A general purpose program NUFLEX for the analysis of 3-D heat/fluid flow in complex geometry with pre/post processor have been developed, which consists of a flow solver based on FVM and a dedicated pre/post processor. The program employs a general non-orthogonal grid system and solve laminar and turbulent (lows with standard and RNG $\kappa-\epsilon$ turbulence models. NUFLEX is capable of analysing two-phase flow with topologically complex interface, turbulent diffusion combustion, solidification problems and magnetic flow. For the purpose of verification of the program and testing the applicability, several practical problems are solved and compared with the available data. Comparison of the NUFLEX results with that by the STAR-CD program has been also made for the same flow configuration and grid structure.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.110-116
• /
• 2005

This paper deals with interaction between two bubbles or particles and flow around them, visualized by a moving object flow image analyzer(MOFIA) consisting of a three-dimensional (3D) moving object image analyzer(MOIA) and two-dimensional particle image velocimetry(PIV). The experiments were carried out for rising bubbles or particles of various densities, sizes, and/or shapes in stagnant water in a vertical pipe. In the MOFIA employed, 3D-MOIA was used to measure particles or bubbles motion and PIV was used to measure fluid flow, The experimental results showed that the interaction was characterized by the shape, size and density of two particles or bubbles.