• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.257-261
• /
• 2005

Over the past 30 years, numerical methods and simulation tools for fluid dynamic problems have advanced as a new discipline, namely, computational fluid dynamics (CFD). Although a wide spectrum of flow regimes are encountered in many areas of science and engineering, simulation of compressible flow has been the major driver for developing computational algorithms and tools. This Is probably due to a large demand for predicting the aerodynamic performance characteristics of flight vehicles, such as commercial, military, and space vehicles. As flow analysis is required to be more accurate and computationally efficient for both commercial and mission-oriented applications (such as those encountered in meteorology, aerospace vehicle development, general fluid engineering and biofluid analysis) CFD tools for engineering become increasingly important for predicting safety, performance and cost. This paper presents the author's perspective on the maturity of CFD, especially from an aerospace engineering point of view.

• 한국항공우주학회지
• /
• 제36권12호
• /
• pp.1139-1145
• /
• 2008

로터 블레이드의 구조변형을 포함한, 제자리 비행하는 로터 블레이드의 공력해석을 수행하였다. 와류포획능력을 향상시킨 전산유체 코드와 간단한 오일러-베르누이 보 모델에 기반을 둔 구조역학 방정식을 결합시켜 회전익 유동에 대한 연계 계산을 수행하였으며 계산결과 타당한 로터블레이드 구조변형 및 공력특성을 얻었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.658-659
• /
• 2009

In this study, fluid-induced vibration (FIV) analyses have been conducted for tall building structure. In order to investigate the aeroelastic responses of tall building due to wind load, advanced computational analysis system based n computational fluid dynamics(CFD) and computational structural dynamics (CSD) has been developed. Fluid domains are modeled using the computational grid system with local grid deforming technique. A fully implicit time marching scheme based on the Newmark direct integration method is used for computing the coupled aeroelastic governing equations of tall structure for fluid-structure interaction (FSI) problems. Detailed aeroelastic responses and results are presented to show the physical phenomenon of the tall building.

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.387-393
• /
• 2006

이 논문에서는 내부에 비정상 유동이 흐르는 균일한 직선 파이프에 대한 스펙트럴요소모델을 개발하였다. 개발된 스펙트럴요소모델에 대한 스펙트럴요소행렬은 주파수 영역에서 구한 파이프 역학 방정식의 엄밀해를 이용하여 유도되었다. 이 스펙트럴요소모델의 정확성을 평가하고 한 예제 파이프 계의 진동특성과 파이프 내부 유동특성을 고찰하기 위하여 스펙트럴 동역학 해석을 수행하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2492-2494
• /
• 2003

Urine analysis is one of the most important medical examination in the hospital. Not only the data for the ingredients of urine through chemical analysis, but also the data related to fluid dynamics, e.g., peak flow rate, average flow rate, may provide some useful information about patient's state of health. Therefore, we develop the portable system to measure and analyse fluid volume/flow rate in this study. This system can store and print the measured data during the pre-specified time interval, and provide some meaningful data related with fluid dynamics. We explain the method and the technical stuff to implement the system, and show the result.

• 한국소음진동공학회논문집
• /
• 제12권11호
• /
• pp.873-881
• /
• 2002

The fluid induced vibration (FIV) phenomena of an equivalent airfoil system of MAV have been investigated in low Reynolds number flow region. Unsteady flows with viscosity are computed using two-dimensional incompressible Navier-Stokes equations. The present fluid/structure interaction analysis is based on one of the most accurate computational approach with computational fluid dynamics (CFD) and computational structural dynamics (CSD) techniques. The highly nonlinear fluid/structure interaction phenomena due to severe flow separations have been analyzed for the low Reynolds region that has a dominancy of flow viscosity. The effects of Reynolds number and initial angle of attack on the fluid/structure coupled vibration instability are shown and the qualitative trend of FIV phenomenon is investigated.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.337-341
• /
• 2010

직경 1 m, 높이 1 m의 교반탱크 내 유체흐름 패턴을 상용 전산유체역학 프로그램의 하나인 CFX를 사용하여 해석함으로써 교반속도, 임펠러 회전날개의 경사각, 방해판의 존재 유무, 탱크바닥 형태가 흐름패턴에 미치는 영향을 알아보았다. 방해판이 없을 경우 탱크 중심에서 와류가 관찰되었으며 교반속도가 증가함에 따라 탱크 중심의 와류 현상이 증가하였으나, 방해판 설치에 의해 와류가 감소하였다. 임펠러 날개의 경사각을 증가시킴으로써 교반탱크 상하로의 유체흐름이 증가하였고 와류도 감소하였다. 탱크바닥을 수평으로 하는 것 보다 둥글게 함으로써 탱크 바닥 구석에서 유체흐름이 원활하게 변화하였다.

• Journal of Multimedia Information System
• /
• 제7권4호
• /
• pp.269-276
• /
• 2020

The small craft including jet-board for leisure are commonly smaller than the general commercial vessels. For the floating vessel, the motion analysis is significantly important component to design the shape. It is, however, hardly predicting its behavior by using conventional boundary element method due to violating small amplitude assumption for potential theory. The computational fluid dynamics method can afford to simulate such small craft, but its grid system was not able to calculate motion, because movable body disturbs the grid system by confliction. The dynamics fluid body interaction model with over-set mesh system can be dealt with movable floating body under irregular ocean wave. In this study, several cases were considered to reveal that DFBI is essential method to predict floating body motion. The single phase simulate was conducted to establish the shape perfection, and then the validated vessel was simulated with ocean waves weather DFBI option on or off. Through the comparison, the results between the cases of DFBI on and off shows significantly difference. It was claimed that the DFBI was necessary not only to calculation body motion, but also to predict accurate drag and lift force on the floating body for small size craft.

• 항공우주기술
• /
• 제13권2호
• /
• pp.150-159
• /
• 2014

본 연구에서는 액체산소/케로신 추진 로켓 엔진 연소장치의 국내 개발에 있어서의 전산유체역학 응용 사례를 간략히 소개하였다. 추진제 공급부에 대한 다차원 유동 해석을 통해 유동 균일성을 확인하고 및 압력 손실을 예측할 수 있으며, 개념 설계 단계에서 추진제 매니폴드 형상 설계안을 비교/선택할 수 있다. 다분야 연소/냉각 성능 통합 해석을 통해 로켓 엔진 연소기의 연료 막냉각 및 열차폐 코팅 조건 등 연소/냉각 성능 관련 설계 문제 해결에 필요한 주요 정보를 도출할 수 있다. 향후 분사면 근처에서의 추진제 혼합 및 연소특성을 파악할 수 있는 해석 모델/기법을 개발할 필요가 있다.

• 한국유체기계학회 논문집
• /
• 제17권1호
• /
• pp.5-11
• /
• 2014

The purpose of this paper is to investigate an analytical approach for opening performance evaluation of the nuclear pressure safety valve based on standard codes such as ASME or KEPIC. It is well-known that safety valve is considered as one of pressure relief valves for protecting a boiler or pressure vessel from exceeding the maximum allowable working pressure. When pressure in a container reaches its set pressure, the safety valve commences discharging the internal fluid by a sudden opening called as popping. Safety valve is usually evaluated by set pressure, full open, blow-down, leakage and flow capacity. The test procedure and technical requirement for performance evaluation is described in international code of ASME code such as BPVC. The opening characteristics of steam safety valve can be analyzed by computational fluid dynamics (CFD) and steam shaft dynamics. First, the flow analysis along opening process is simulated by running the CFD models of the ten types of opening steps from 0 to 100%. As a analysis result, the various CFD outputs of flow pattern, pressure, forces on the disc and mass flow at each simulation step is demonstrated. The lift force is calculated by using the forces applied on disc from static pressure and secondary flow. And, the effect of huddle chamber or control chamber is studied by dynamic analysis based on CFD simulation results such as lift force. As a result, dynamics analysis shows opening features according to the sizes of control chamber.