• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.1
• /
• pp.57-62
• /
• 2011

The effects of swirl chamber's diameter and length on injector's dynamic characteristics were investigated through an experimental study. A mechanical pulsator was installed in front of the manifold of a swirl injector which produces pressure oscillations in the feed line. Pressure in the manifold, liquid film thickness in the orifice and the pressure in the orifice were measured in order to understand the dynamic characteristic of the simplex swirl injector with varying geometry. A direct pressure measuring method (DPMM) was used to calculate the axial velocity of the propellant in the orifice and the mass flow rate through the orifice. These measured and calculated values were analyzed to observe the amplitude and phase differences between the input value in the manifold and the output values in the orifice. As a result, a phase-amplitude diagram was obtained which exhibits the injector's response to certain pressure fluctuation inputs. The mass flow rate was calculated by the DPMM and measured directly through the actual injection. The effect of mean manifold pressure change was insignificant with the frequency range of manifold pressure oscillation used in this experiment. Mass flow rate was measured with the variation of injector's geometries and amplitude of the mass flow rate was observed with geometry and pulsation frequency variation. It was confirmed that the swirl chamber diameter and length affect an injector's dynamic characteristics. Furthermore, the direction of geometry change for achieving dynamic stability in the injector was suggested.

• KIISE Transactions on Computing Practices
• /
• v.23 no.8
• /
• pp.459-465
• /
• 2017

Although the performance of computer hardware is increasing due to the development of manycore technologies, software lacking a proportional increase in throughput. Functional languages can be a viable alternative to improve the performance of parallel programs since such languages have an inherent parallelism in evaluating pure expressions without side-effects. Specifically, Haskell is notably popular for parallel programming because it provides easy-to-use parallel constructs based on monads. However, the scalability of parallel programs in Haskell tends to fluctuate as the number of cores increases, and the garbage collector is suspected to be the source of this fluctuations because it affects both the space and the time needed to execute the programs. This paper uses the tuning tool, GC-Tune, to improve the scalability of the performance. Our experiment was conducted with a parallel plagiarism detection program, and the scalability improved. Specifically, the fluctuation range of the speedup was narrowed down by 39% compared to the original execution of the program without any tuning.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.3 no.2
• /
• pp.59-68
• /
• 1995

Composting facilities are operated with air and moisture control. Composting effects on two operating factors was analysed changing aeration rate with and without water addition to maintain the optimun moisture level. Though the composting facilties are provided with appropriate surroundings for compositing, operating temperature is set for decomposition rate. Accordingly control of decomposition phases was analysed by modeling the process of high and low decomposition phases with various operating temperature. A composting model of "The Library of Compost Engineering Software" developed by Roger T. Haug Inc. in U.S.A. was applied in modeling. As result of this study, operation with optimum moisture has more sensitive temperature to aeration fluctuation and lead to higher reaction rate with lower aeration than operation with poor moisture. Decomposition rate in composting facilities depend on slow decomposition phase because high rate decomposing substances already have been decomposed before entire process is not completed. In order to enhance decomposition rate of organics, effective decomposition in slow decomposition phase needs to be focused.

• Journal of Acupuncture Research
• /
• v.15 no.2
• /
• pp.369-382
• /
• 1998

The purpose of this study was finding the pain inhibitory effect of acupuncture at $LI_4$. The pain at dentes incisivi was evoked by noxious electric stimulation and EMG changes based on the interval were measured. To do this, the opioid antagonist was administered intraperitoneally. Following are some of results. 1. The pain inhibitory effect of acupuncture at $LI_4$ was 94.35%, 84.56%, 57.62%, 54.40%, at 10, 20, 30 and 40 minutes respectively. All the data were calculated based on 100% at 0 minute. The effect was very significant at 40 minutes. 2. The continuous effect of acupuncture at $LI_4$ after taking out the needle was 58.58%, 57.62%, 66.22%, 73.18%, 83.70%, 92.68%, at 50, 50, 70, 80, 90 and 100 minutes respectively. The overall continuous effect was shown its maximum 20 minutes after taking out the needle and reached to the initial value at 60 minutes. 3. The pain inhibitory effect following the naloxone administration and acupuncture application at $LI_4$ was 95.96%, 96.04%, 94.86%, 94.92% at 10, 20, 30 and 40 minutes respectively. All values showed similar tendency to the initial data. 4. The continuous effect of acupuncture at $LI_4$ after taking out the needle which was preceded by the naloxone administration was 94.48%, 96.02%, 96.02%, 98.00%, 98.46%, 97.18% at 50, 60, 70, 80, 90 and 100 minutes respectively. This trend was not a significant fluctuation. It was concluded that effect of acupuncture at $LI_4$ was shown in conjunction with secretion of analgesic substance. Therefore it is implied that the acupuncture application will play a major role in treating many diseases with more revelation of scientific acupuncture mechanism. Further studies of acupuncture manipulation are needed in the future based on our study.

• Journal of Acupuncture Research
• /
• v.15 no.2
• /
• pp.287-300
• /
• 1998

The purpose of this study was finding the pain inhibitory effect of acupuncture at ST-36. The pain at dentes incisor was evoked by noxious electric stimulation and EMG changes based on time interval were measured. To do this, the opioid antagonist was administered intraperitoneally. Followings are some of the results. 1. The pain inhibitory effect of acupuncture at ST-36 was 93.82%, 87.00%, 75.30%, 69.76% at 10 20, 30 and 40 minutes respectively. All the data were calculated based on 100% at 0 minute. The effect was very significant at 40 minutes. 2. The continuous effect of acupuncture at ST-36 after taking out the needle was 77.46%, 79.66%, 87.60%, 91.50%, 95.14%, 99.48% at 50, 60, 70, 80, 90 and 100 minutes respectively. The overall continuous effect was shown its maximum 20 minutes after taking out the needle and reached to the initial value at 60 minutes. 3. The pain inhibitory effect following the naloxone administration and acupuncture application ST-36 was 93.44%, 94.58%, 90.80%, 88.04% at 10, 20, 30 and 40 minutes respectively. All values showed similar tendency to the initial data. 4. The continuous effect of acupuncture at ST-36 after taking out the needle which was preceded by the naloxone administration was 91.26%, 91.90%, 92.06%, 93.66%, 94.12%, 93.50% at 50, 60, 70, 80, 90 and 100 minutes respectively. This trend was not a significant fluctuation. It Was concluded that effect of acupuncture at ST-36 was shown in conjunction with secretion of analgesic substance. Therefore it is implied that the acupuncture application will play a major role in treating many diseases with more revelation of scientific acupuncture mechanism. Further studies of acupuncture manipulation are needed in the future based on our study.

• Journal of Environmental Science International
• /
• v.26 no.9
• /
• pp.1031-1043
• /
• 2017

Recently severe drought caused the water shortage around the western parts of Chungcheongnamdo province, South Korea. A Diversion tunnel from the Geum river to the Boryong dam, which is the water supply dam for these areas has been proposed to solve this problem. This study examined hydraulic impacts on the Geum river associated with the diversion plan assuming the severe drought condition of 2015 would persist for the simulation period of 2016. The hydraulic simulation model was verified using hydrologic and hydraulic data including hourly discharges of the Geum river and its 8 tributaries, fluctuation of tidal level at the mouth of the river, withdrawals and return flows and operation records of the Geum river barrage since Feb. 1, 2015 through May 31, 2015. For the upstream boundary condition of the Geum river predicted inflow series using the nonlinear regression equation for 2015 discharge data was used. In order to estimate the effects of uncertainty in inflow prediction to the results total four inflow series consisting of upper limit flow, expected flow, lower limit flow and instream flow were used to examine hydraulic impacts of the diversion plan. The simulation showed that in cases of upper limit and expected flows there would be no problem in taking water from the Geum river mouth with a minimum water surface level of EL(+) 1.44 m. Meanwhile, the simulation also showed that in cases of lower limit flow and instream flow there would be some problems not only in taking water for water supply from the mouth of the Geum river but also operating the diversion facility itself with minimum water surface levels of EL(+) 0.94, 0.72, 0.43, and 0.14 m for the lower limit flow without/with diversion and the instream flow without/with diversion, respectively.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.443-448
• /
• 2020

In this study, field measurements were performed to analyze the effects of train types (AREX, AREX Express, KTX, KTX-Sancheon) and train speeds on the dynamic behavior of the direct fixation track structure on Yeongjong grand bridge by bridge type (truss bridge, suspension bridge). Based on field measurement results, the track impact factor and train running stability (coefficient of derailment, Rate of wheel load reduction, lateral displacement of rail head) are compared with domestic and foreign standards and regulations to influence the dynamic behavior of direct fixation track. As a result, the differences in the dynamic behavior of the direct fixation tracks by the type of bridges of Yeongjong bridge are not significant, but it was analyzed that these were more directly affected by the magnitude of the train load. Therefore, it is necessary to establish the reinforcement plan of the direct fixation track structure on Yeongjong grand bridge in consideration of the increase of the track impact factor and dynamic track force.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.59-68
• /
• 2002

The cylindrical Upper Guide Structure assembly of the reactor intervals wish the Core Support Barrel and the Inner Barrel Assembly is subjected to flow induced loads horizontally which include random pressure fluctuation due to turbulent flow and pump pulsation pressures. The purpose of this papers is to perform random vibration and harmonic response analyses fort flow induced loads. The dynamic response characteristics due to random turbulence and pump pulsation loads were evaluated using the lumped mass beam model. Especially the model considered the annulus effects due to water gaps existing between cylindrical structures such as the Upper Guide Structure Barrel, the Core Support Barrel, and the Inner Barrel Assembly. The effect of the Inner Barrel Assembly inside the Upper Guide Structure assembly was studied. The peak dynamic responses lot each loading condition due to the addition of IBA were affected by the natural frequencies of the structures. Therefore the peak dynamic responses of the structures should be conservatively obtained from evaluation of dynamic analysis for various loading conditions.

• Plant Journal
• /
• v.4 no.3
• /
• pp.60-65
• /
• 2008

Power plant industry has been developed at high-capacity, high-technology, and innovation. Steam turbine became the most useful equipment that dominate more than 50% of all the world electricity production. And developed new materials of the turbine blade and extended length of the turbine last blade brought reform in steam turbine performance upgrade. In this paper, when do partial load driving in high-capacity steam turbine, optimum driving method found whether there is something. In operating steam turbine, there is a lot of loss from secondary wake and throttle of the 1st stage nozzle by the biggest leading factor that load fluctuation affects in high-pressure steam turbine performance. Effect of internal efficiency by 1 stage nozzle is the biggest here, but here fluid flow and flow analysis were not yet examined closely definitely. So, Analyzed design data and acceptance performance test result to applying subcritical pressure drum type 560 MW, supercritical-pressure once through type 500 MW, and 800 MW steam turbines actually. In conclusion, at partial load driving, partial arc admission(PAA) is more efficient than full arc admission(FAA) efficiency. This is judged by because increase being proportional with gross energy of stream that is pressure - available energy if pressure of stream that is flowed in to the turbine increases, available energy becomes maximum and turbine efficiency improves. Therefore, turbine performance is that preview that first stage performance fell if decline is serious in partial load because first stage performance changes according to load.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.3
• /
• pp.63-78
• /
• 2013

PURPOSE : This study aims to investigate the positive correlation in pre-post test design between squat exercise on different baseform and the static/dynamic balance ability enhancement in adults. METHOD : This clinical study was designed into three different random-sampling adult groups (flat, balanced, vibration exercise device) and performed squat exercise. The static/dynamic balance ability was measured prior to the intervention and vice-versa. Balance was examined using the balance master 7.0 version systems. RESULT : 1) After the intervention, the controlled mat group in mCTSIB has showned the minimal mean value and the variation regards as acceptable by statistic value. 2) After the intervention, The mean value of LOS shows the minimal average variation in Randomised Trials, but the other two trials shows the maximal fluctuation. The difference variation regards as acceptable statistic value. 3)After the intervention, the mean value of mat group measrued as the maximal results, the difference variation regards as acceptable statistic value. 4)The striking correlation difference at mCTSIB has found in the vibration device exercise group, but LOS and Rhythmic W-S showed the correaltion in Mat group. CONCLUSION : The study found the positive correlation that enhanced balance ability on the different dynamic baseform squat exercise than static baseform environment. The significant difference found the balance pad squat effects on developing balance ability and the correlationship regards as statistically significant value.