• 한국지반공학회논문집
• /
• 제29권11호
• /
• pp.73-84
• /
• 2013

사면 내 토사가 붕괴되거나 토석류가 발생하는 경우 파괴면에 작용하는 전단강도는 0에 가깝게 되면서 토사가 비점성 액체와 같이 유동한다. 점성토는 함수비 증가에 따라 그 연경도가 달라지며 액체상태로 바뀌는 액성한계에서 도 약간의 전단강도를 가진다. 본 연구에서는 점성토의 전단강도가 0이 되어 흐름을 유발하는 함수비를 찾고자 하였 다. 카올리나이트, 벤토나이트, 그리고 카올리나이트(50%)+벤토나이트(50%)와 같은 세 종류의 점토에 혼합수로 증류 수, 해수, 또는 미생물용액을 혼합하여 액성한계 상태로 만든 다음 함수비를 단계적으로 증가시키면서 토베인 시험기 를 이용하여 비배수전단강도를 측정하였다. 액성한계와 소성한계에서 비배수전단강도의 범위는 각각 3.6-9.2kPa와 24-45kPa 정도이었다. 한편 측정 결과로부터 비배수전단강도가 급격하게 변화하는 값에 해당하는 함수비를 흐름함수 비(Flow Water content)로 정의하였으며, 비배수전단강도가 0이 될 때의 함수비를 흐름한계(Flow Limit)로 정의하였다. 그리고 흐름한계와 액성한계의 상관관계를 살펴보기 위하여 흐름한계와 액성한계의 차이를 점성지수(Cohesive Index) 로 정의하였다. 또한 흐름한계와 소성한계의 차이를 새로운 소성지수(New Plasticity Index)로 정의하였으며, 흐름한계를 이용하여 새로운 액성지수(New Liquidity Index)도 정의하였다. 흐름한계(Flow Limit)는 액성한계보다 1.5-2배 정도 높은 값을 보였으며, 새로운 소성지수는 기존 소성지수보다 2-5.5배 정도 높았다.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권2호
• /
• pp.78-84
• /
• 2000

This paper introduces a method of determining the maximum real power transfer limit of interface lines, which connect two areas of a power system, using locally parameterized continuation algorithm. This method traces the path of power flow solutions as interface flow is gradually increased under a certain load demand condition and finds the steady state voltage stability limit, the interface flow limit. Voltage stability index is used to indicate how close the maximum limit is reached. Also, this study presents a procedure to determine the security-constrained interface flow limit using the above method. Contingency ranking index is proposed to identify the severity of contingencies. The case study is performed according to the suggested procedure.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권2호
• /
• pp.83-89
• /
• 2001

This paper introduces a power flow model of SSSC for voltage stability analysis of power system installed with Static Synchronous Compensators. The SSSC model is obtained from the injection model of voltage source inverter by adding the condition that SSSC injection voltage is in quadrature with current of SSSC-installed branch. This model is incorporated into modified CPF algorithm to study effects of SSSC on the security-constrained interface flow limit. Determination of interface flow limit is simply briefed. In case study a 771-bus real system is used to show that interface flow limit can be improved by appropriate control of SSSC in terms of voltage stability.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.313-319
• /
• 2006

This paper addresses improving the voltage stability limit of interface flow between two different regions in an electric power system using the Static Synchronous Series Compensator (SSSC). The paper presents a power flow analysis model of a SSSC, which is obtained from the injection model of a series voltage source inverter by adding the condition that the SSSC injection voltage is in quadrature with the current of the SSSC-installed transmission line. This model is implemented into the modified continuation power flow (MCPF) to investigate the effect of SSSCs on the interface flow. A methodology for determining the interface flow margin is simply briefed. As a case study, a 771-bus actual system is used to verify that SSSCs enhance the voltage stability limit of interface flow.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1669-1678
• /
• 1990

본 연구에서는 다중선회연소기의 원리에 기초하여 연료와 산화제의 접촉면적 및 혼합속도를 증가시킴으로써 연소부하의 증대 및 연소효율의 향상효과를 얻을 수 있 는 새로운 연소방식을 개발하기 위한 시도로서 속도차가 있는 동축의 두 공기분류 사 이의 전단층에 기체연료를 분출시켜서 형성되는 난류확산 화염에 관하여 유동장의 성 상이 화염안정한계 및 화염구조에 미치는 영향을 조사하여 실용연소기의 유도장제어 및 고부하연소기설계를 위한 기초자료를 얻는데 목적이 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.28-30
• /
• 2000

This paper introduces a power flow model of SSSC for voltage stability study. The SSSC model is obtained from the injection model of voltage source inverter by adding the condition that SSSC injection voltage is in quadrature with current of SSSC-installed branch. This model is incorporated into modified CPF algorithm to study effects of SSSC on the security-constrained interface flow limit. Determination of interface flow limit is simply briefed. In case study a 771-bus real system is used to show that SSSC can improve interface flow limit in terms of voltage stability.

• 한국환경과학회지
• /
• 제26권9호
• /
• pp.1031-1043
• /
• 2017

Recently severe drought caused the water shortage around the western parts of Chungcheongnamdo province, South Korea. A Diversion tunnel from the Geum river to the Boryong dam, which is the water supply dam for these areas has been proposed to solve this problem. This study examined hydraulic impacts on the Geum river associated with the diversion plan assuming the severe drought condition of 2015 would persist for the simulation period of 2016. The hydraulic simulation model was verified using hydrologic and hydraulic data including hourly discharges of the Geum river and its 8 tributaries, fluctuation of tidal level at the mouth of the river, withdrawals and return flows and operation records of the Geum river barrage since Feb. 1, 2015 through May 31, 2015. For the upstream boundary condition of the Geum river predicted inflow series using the nonlinear regression equation for 2015 discharge data was used. In order to estimate the effects of uncertainty in inflow prediction to the results total four inflow series consisting of upper limit flow, expected flow, lower limit flow and instream flow were used to examine hydraulic impacts of the diversion plan. The simulation showed that in cases of upper limit and expected flows there would be no problem in taking water from the Geum river mouth with a minimum water surface level of EL(+) 1.44 m. Meanwhile, the simulation also showed that in cases of lower limit flow and instream flow there would be some problems not only in taking water for water supply from the mouth of the Geum river but also operating the diversion facility itself with minimum water surface levels of EL(+) 0.94, 0.72, 0.43, and 0.14 m for the lower limit flow without/with diversion and the instream flow without/with diversion, respectively.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권7호
• /
• pp.824-831
• /
• 1999

This paper presents new methods to resolve the important limits in the decoupled UPFC model for power flow, by which conventional power flow program can be performed with addition of two buses per one UPFC. In order to operate UPFC to the desired value, the series voltage and shunt current of UPFC should be computed. So a method of calculating these by simple equations after power flow is derived. However, the calculated magnitude of series voltage and/or shunt current of UPFC may not be allowed because of the UPFC limit \ulcorner to the ratings of inverters. In this case, the active power and the reactive power (or the voltage magnitude) of UPFC buses should be revised to resolve the limit. This paper proposes the Newton Raphson method to resolve these limits. Particularly, when resolving the series voltage magnitude, three strategies are proposed according to the priority of the active power and the reactive power (or the voltage magnitude).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1992년도 춘계학술대회 논문집 92
• /
• pp.159-176
• /
• 1992

Limit analysis has been rendered versatile in many problems such as structural problems and metal forming problems. In metal forming analysis, a slip-line method and an upper bound method approach to limit solutions is considered as the most challenging areas. In the present work, a general algorithm for limit solutions of plastic flow is developed with the use of finite element limit analysis. The algorithm deals with a generalized Holder inequality, a duality theorem, and a combined smoothing and successive approximation in addition to a general procedure for finite element analysis. The algorithm is robust such that from any initial trial solution, the first iteration falls into a convex set which contains the exact solution(s) of the problem. The idea of the algorithm for limit solution is extended from rigid/perfectly-plastic materials to work-hardening materials by the nature of the limit formulation, which is also robust with numerically stable convergence and highly efficient computing time.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1993년도 제1회 학술강연회논문집
• /
• pp.55-61
• /
• 1993

An experimental investigation was conducted in order to determine the flammability limit of the solid fuel ramjet using the backward facing step flow combustion of the plexiglass grain. In order to get the different step height ratio, the grain was drilled straight forward or stepwise. The Phoenics computer code was adopted in order to compare. the flow patterns of the some sample tests using a non-reacting cold turbulent flow model. The stepwise grain give some loading advantage; specially thin and long shape grain design.