• 기술사
• /
• 제31권1호
• /
• pp.9-16
• /
• 1998

For the flow facing high1y informationized age, there is a flow from fixed communications connecting fixed places such as offices and homes to mobile communications connecting mobile objets such as automobiles, ships and aircraft. This flow has added to diversifying communications Including data and images. While the axed mode is diversifying information media by digitalization of communications network and computers, the mobile mode has brought higher sophistication of communication modes by a higher degree of electric wave utilization. The following descriptions outlines the mobile communication which is utilizing the electric wave phenomena. In sequence the following items are described: a brief history of mobile communications, the technical object and various kinds of services, propagation of electric wave signal.

• 기술사
• /
• 제31권2호
• /
• pp.65-72
• /
• 1998

For the flow facing highly informationized age, there Is a flow from fixed communications connecting fixed places such as offices and homes to mobile communications connecting mobile objets such as automobiles, ships and aircraft. This flow has added to diversifying communications including data and images. While the fixed mode Is diversifying information media by digitalization of communications network and computers, the mobile mode has brought higher sophistication of communication modes by a higher degree of electric wave utilization. The following descriptions outlines the mobile communication which Is utilizing the electric wave phenomena. In sequence the following items are described: a brief history of mobile communications, the technical object and various kinds of services, propagation of electric wave signal.

• 한국경영과학회지
• /
• 제26권1호
• /
• pp.71-85
• /
• 2001

This paper considers a cost model for a U-shaped manufacturing cell formation which incorporates a required number of machines and various material flows together under multi-part multi-cell environment. The model is required to satisfy both the specified operation sequence of each part and the total part demand volume, which are considered to derive material handling cost in U-shaped flow line cells. In the model several cost-incurring factors including set-up for batch change-over, processing time for operations of each part, and machine failures are also considered in association with processing load and capacity of each cell. Moreover, a heuristic for a good machine layout in each cell is newly proposed based on the material handling cost of each alternative sequence layout. These all are put together to present an efficient heuristic for the U-shaped independent-cell formation problem, numerical problems are solved to illustrate the algorithm.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.341-344
• /
• 2002

Neurodegenerative disorders, like Alzheimer's disease, are often accompanied by reduced brain perfusion (cerebral blood flow). Using the intrinsic magnetic properties of water, arterial spin labeling magnetic resonance imaging (ASLMRI) can map brain perfusion without injection of radioactive tracers or contrast agents. However, accuracy in measuring perfusion with ASL-MRI can be limited because of contributions to the signal from stationary spins and because of signal modulations due to transient magnetic field effects. The goal was to optimize ASL-MRI for perfusion measurements in the aging human brain, including brains with Alzheimer's disease. A new ASL-MRI sequence was designed and evaluated on phantom and humans. Image texture analysis was performed to test quantitatively improvements. Compared to other ASL-MRI methods, the newly designed sequence provided improved signal to noise ratio improved signal uniformity across slices, and thus, increased measurement reliability. This new ASL-MRI sequence should therefore provide improved measurements of regional changes of brain perfusion in normal aging and neurodegenerative disorders.

• 품질경영학회지
• /
• 제17권1호
• /
• pp.69-81
• /
• 1989

This study is concerned with a job sequencing method using the concept of sampling technique in the case of Job Shop. This is the follow study of Kang and Ro (1988) which examined the possibility of application of sampling technique to determine the Job Sequence in the case of Flow Shop. Not only it is very difficult, but also it takes too much time to develop the appropriate job schedules that satisfy the complex work conditions. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions or assumptions. The application areas of these algorithms are also very narrow, so it is very hard to find the appropriate algorithm which satisfy the complex work conditions. In this case it is very desirable to develop a simple job sequencing method which can select the optimal job sequence or near optimal job sequence with a little effort. This study is to examine the effect of sampling job sequencing which can select the good job of 0.01%~5% upper good group. The result shows that there is the sets of 0.05%~23% job sequence group which has the same amount of performance measure with the optimal job sequence in the case of experiment of N/M/G/$F_{max}$. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with consuming a small amount of time. The results of ANOVA show that the only one factor, number of machines is the significant factor for determining the job sequence at ${\alpha}=0.01$. It takes about 10 minutes to compare the number of 10,000 samples of job sequence by personal computer and it is proved that the selection rate of the same job sequence with optimal job sequence is 23.0%, 3.9% and 0.065% in the case of 2 machines, 3 machines and 4 machines, respectively. The area of application can readily be extended to the other work condition.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.433-441
• /
• 2001

Natural convection of a fluid with intermediate Prand시 number of Pr=0.2 in a horizontal annulus is considered, and the bifurcation phenomena and chaotic flows are numerically investigated. The unsteady two-dimensional streamfunction-vorticity equation is solved with finite difference method. The steady downward flow with two counter-rotating eddies bifurcates to a simple periodic flow with a fundamental frequency. And afterwards, second Hopf bifurcation occurs, and a quasi-periodic flow with two incommensurable frequencies appears. However, a new time-periodic flow is established after experiencing quasi-periodic states. As Rayleigh number is increased further, the chaotic flow regime is reached after a sequence of successive Hopf bifurcation to quasi-periodic and chaotic flow regimes. A scenario similar to the Ruelle-Takens-Newhouse scenario of the onset of chaos is observed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1494-1498
• /
• 2004

Transition sequence of rocket to ramjet was simulated numerically for a two-dimensional axisymmetric can-type ramjet engine. Multi-species preconditioned Navier-Stokes equations with $k-{\varepsilon}$ turbulence model and finite-rate chemistry model was employed. To calculate transition sequence, initial flow-field conditions for inlet diffuser with closed port-cover was computed first, and then that result was applied as initial conditions after port-cover opened. Terminal shock was developed as a result of increased pressure in a combustor due to combustion and ramjet operated at supercritical condition. For a smaller nozzle throat area, buzz instability was occurred. Strong pressure oscillations were observed as a result of forward and backward movement of terminal shock and those oscillations were not damped out.

• 한국경영과학회지
• /
• 제18권1호
• /
• pp.139-157
• /
• 1993

This paper presents possibilistic job scheduling based on the membership function as an alternative to probabilistic job scheduling and illustrates a methodology for solving job sequencing problem which the opinions of experts greatly disagree in each processing time. Triangular fuzzy numbers are used to represent the processing times of experts. Here, the comparison method is based on the dominance property. The criteria for dominance are presented. By the dominance criteria, for each job, a mojor TFN and a minor TFN are selected and apessimistic sequence with mojor TFNs and an optimistic sequence with minor TFNs are computed. The three-machine flow shop problem is considered as an example to illustrate the approach.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.585-591
• /
• 2016

DOCR can be used to efficiently increase the reliability and to protect the bi-directional D/L(Distribution Lines). As more DG(Distributed Generation)s attempt to connect the bi-directional D/L, there is an increasing need for studies of how to use DOCR installed in the D/L. This paper investigates the operating principles of DOCR and presents the results an effect of sequence and fault impedance in L-L(Line to Line) fault. An advanced DOCR operating algorithm is proposed to reduce the mal-operation of conventional DOCR. The proposed algorithm is applied to the bi-directional power flow system and shows that it decreases the mal-operation of DOCR through the computer simulation.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.197-208
• /
• 1999

This paper presents an operation sequence-based approach for determining machine cell layout in a cellular manufacturing environment. The proposed model considers the sequence of operations in evaluating the intercell and intracell movements. In this paper, design of cellular layout has an objective of minimization of total material flow among facilities, where the total material flow is defined as a weighted sum of both intercell and intracell part movements. The proposed algorithm is developed by using genetic algorithm and can be used to design an optimal cellular layout which can cope with changes of shop floor situation by considering constraints such as the number of machine cells and the number of machines in a machine cell.