• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.425-428
• /
• 2006

Natural gas hydrate has been a major problem for its plugging nature in the pipeline. With the demand of deep-water production, the importance of flow assurance technology, preventing hydrate, asphaltene and wax in the pipeline becomes bigger Kinetic models combined with the flow simulator are being developed to explain the nature of hydrate plug formation in the pipeline. To simulate the hydrate plug formation, each stage including the nucleation, growth and agglomeration should be considered. The hydrate nucleation is known to be stochastic and is believed hard to be predicted. Recent publications showed hydrate growth and agglomeration can be observed rigorously using a particle size analyzer. However properties of the hydrate should be investigated to model the growth and agglomeration. The attractive force between hydrate particles, supposed to be the capillary force, was revealed to be stochastic. Alternative way to model the hydrate agglomeration is to simulate by the discrete element method. Those parameters, particle size distribution, attractive force, and growth rate are embedded into the kinetic model which is combined Into the flow simulator. When compared with the flowloop experimental data, hydrate kinetic model combined into a flow simulator showed good results. With the early results, the hydrate kinetic model is promising but needs more efforts to improve it.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1333-1339
• /
• 2014

As the demand for petroleum resources increases, and oilfields on lands and in shallow-sea become exhausted, the areas for oil production are expanding to the deep sea and therefore technologies for flow assurance are coming into the highlight. In low temperature environment such as the deep sea, wax is accumulated and prevents stable oil production. Therefore, the development of flow assurance technologies is required. Wax is precipitated in crystalline form when the oil temperature decreases below the wax appearance temperature; it then accumulates on the inner walls of pipelines causing blockages. In particular, in subsea pipelines, which have a large surface contact area with the surrounding seawater, wax deposition problems are frequent. The internal tubular coating can effectively reduce wax deposition without pausing oil production when the coating is appropriately designed. This study carried out wax deposition tests on a number of internal tubular coatings under single flow conditions. The results were analyzed for the effects that the physical properties of the coatings had on wax deposition.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.45-53
• /
• 2015

The fact that gas hydrate and/or paraffin wax is frequently plugged in offshore pipeline has been become very significant for offshore piepline flow assurance. An active electrical heating along pipeline has adapted in resolving flow assurance problem like as gas hydrate and wax plugging. This study represents a novel internal-swirled heater which was designed and fabricated for more effective heating and thermal mixing through pipeline. The internal-swirled heater suggested in this study shows higher thermal mixing performances than the conventional external-traced heater.

• Journal of Distribution Science
• /
• v.19 no.7
• /
• pp.5-17
• /
• 2021

Purpose: The distribution of goods and the flow of information, determined by consumer behavior toward online shopping, is drastically popular worldwide. This study examines some factors such as brand trust, online sales promotion, consumer personality, delivery service, quality assurance, information search, and online consumer satisfaction influence online shopping behavior. Research design, data, and methodology: A constructed questionnaire in an online survey was conducted with 241 random cluster respondents in the greater Jakarta Area. Structure equation model was utilized to analyze and verify all the data. Results: Research finding indicates online sales promotion, delivery service, quality assurance, and online consumer satisfaction positively influence information search. Meanwhile, brand trust, quality assurance, and information search positively influence online shopping behavior. However, the result illustrates that consumer personality negatively influences both information search and online shopping behavior. Conclusions: To influence online shopping behavior, the most important factors that need to be considered by marketplaces are quality assurance. It positively motivates Indonesia's citizens to collect information and make unplanned purchases. The study finding can be a reference for brands to maintain and build outstanding product quality, an informational website, and an excellent marketing strategy so that customers can meet their expectations. Besides, it also broadens both companies' and individuals' knowledge about the digital revolution on consumer behavior.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.185-194
• /
• 2012

Deepwater oil is becoming more attractive because most onshore and shallow water oil is developing or developed. With the on-going trend to deepwater oil developments, flow assurance problems which prevent oil flow from reservoir to processing facilities are becoming an issue because deposited material can be occurred in case oil is exposed to very different environment from reservoir. Wax deposition which is one of flow assurance problems can be a major technical and economic issue because it is very sensitive to temperature. In order to predict and mitigate wax problems, the precise measurement of wax appearance temperature (WAT) which is the starting temperature of wax precipitation is very important. Various methods have been suggested for WAT measurement of opaque oil because there is no standard method for opaque oil. In this study, the WAT of opaque oil samples was measured using viscosity measurement method, differential scanning calorimetry, filter plugging method, and pressurized filter plugging method. Wax deposition test and high temperature gas chromatography analysis were applied to verify measured WAT. As a result of study, the WAT of opaque oils was successfully measured and verified. If WAT measurement methods of opaque oil related to oil characteristics is systematized using the results of this study, it can be a valuable tool for WAT measurement of opaque oil and flow assurance related to wax deposition.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2015

Wax deposition hinders oil flow assurance. Huge amount of money and time were required for mitigation of wax deposition in the oil field. For prediction and mitigation of wax deposition problem, Wax Appearance Temperature(WAT), which is the temperature at which the first wax crystals start to form, needs to be measured in advance. There is a standard method which is optical way to measure the WAT of transparent oil. However, standard method cannot be applied to opaque oil which is common produced oil in the field. In this study, WAT of three transparent oil samples were measured using heat flux variation analysis, viscosity variation analysis and density variation analysis, and compared with WAT measured by standard method. As a result, WAT measured by density variation analysis is the more reliable than heat flux variation analysis and viscosity variation analysis. WAT of two opaque oils were measured using density variation analysis.

• Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.173-186
• /
• 2014

The failure of a subsea production plant could induce fatal hazards and enormous loss to human lives, environments, and properties. Thus, for securing integrated design safety, core source technologies include subsea system integration that has high safety and reliability and a technique for the subsea flow assurance of subsea production plant and subsea pipeline network fluids. The evaluation of subsea flow assurance needs to be performed considering the performance of a subsea production plant, reservoir production characteristics, and the flow characteristics of multiphase fluids. A subsea production plant is installed in the deep sea, and thus is exposed to a high-pressure/ low-temperature environment. Accordingly, hydrates could be formed inside a subsea production plant or within a subsea pipeline network. These hydrates could induce serious damages by blocking the flow of subsea fluids. In this study, a simulation technology, which can visualize the system configuration of subsea production processes and can simulate stable flow of fluids, was introduced. Most existing subsea simulations have performed the analysis of dynamic behaviors for the installation of subsea facilities or the flow analysis of multiphase flow within pipes. The above studies occupy extensive research areas of the subsea field. In this study, with the goal of simulating the configuration of an entire deep sea production system compared to existing studies, a DES-based simulation technology, which can logically simulate oil production processes in the deep sea, was analyzed, and an implementation example of a simplified case was introduced.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.45-52
• /
• 2021

The article proves the relevance of developing conceptual frameworks for managing the quality assurance of logistics activities in the context of socio-economic interaction of their participants. It is established that the fundamental difference of the logistic approach in management from traditional approaches is the allocation of a single management function of previously separated, disparate material flows, as well as economic, technological, information integration of chain links into a single system capable of effective management of these flows. It is substantiated that the functioning of the enterprise as a logistics system can be represented in the form of a triad of logistics components, namely: supply logistics, production logistics, sales logistics. Management of quality assurance processes of logistics activities in the context of socio-economic interaction of their participants is a functional component of the entire logistics system due to the quality of work and interaction of all participants in the implementation of certain activities. The quality of logistics activities will affect the level of economic potential, rationalization and optimization of all logistics flows. It is proved that the management of quality assurance processes of logistics activities in the context of socio-economic interaction of their participants involves the following main areas: the introduction of a quality system of logistics processes; development and implementation of the general strategy of quality improvement at the enterprise; internal integration; controlling. Management of quality assurance processes of logistics activities in the context of socio-economic interaction of its participants requires compliance with the following requirements: systematic and comprehensive management of all flow processes; coordination of criteria and indicators for assessing the effectiveness of the entire logistics system; dissemination of the use and application of information technology; ensuring partnerships and close interaction of all participants in sales networks.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.53 no.4
• /
• pp.12-16
• /
• 2016

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.9
• /
• pp.900-906
• /
• 2010

We analyse benefits and costs of investment on the assurance of aircraft design and development of related infrastructure. Although the discounted cash flow from the sales of aircrafts is found to be smaller than the amount of required investment, the net present value considering the effects of export increase, import substitution, and the accident cost reduction is very high. This justifies governmental investment, for the effects are not easily appropriated by private investors.