• International Journal of Aeronautical and Space Sciences
• /
• 제11권2호
• /
• pp.131-135
• /
• 2010

We report on the design of a three-axis missile autopilot using multi-objective control synthesis via linear matrix inequality techniques. This autopilot design guarantees $H_2/H_{\infty}$ performance criteria for a set of finite linear models. These models are linearized at different aerodynamic roll angle conditions over the flight envelope to capture uncertainties that occur in the high-angle-of-attack regime. Simulation results are presented for different aerodynamic roll angle variations and show that the performance of the controller is very satisfactory.

• 한국항공운항학회지
• /
• 제21권4호
• /
• pp.11-16
• /
• 2013

Airworthiness certification is a repeatable process implemented to verify that a specific aircraft can be safely maintained and operated within its approved flight envelope. Airworthiness certification activity for the FA-50 aircraft has been performed according to the Airworthiness Certification Criteria, issued in 2011 by DAPA. It is a right time to study the application of those existing ACC process and tools to the hypothetical modification aircraft. This paper describes airworthiness engineers view of the integrated activities required to substantiate the modified aircraft performance. The compliance methods applicable to the airworthiness certification criteria is also suggested. It will be useful for the establishment of the future Korea modified military aircraft's ACC with the risk assessment and methods of compliances tailored to the legacy aircraft.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.87-91
• /
• 2015

KT-1P for the Peru Air Force will be used as a utility aircraft with upgraded avionics equipment and arming capability based on KT-1 and KA-1. KT-1P should be shown for compatibility of new store loading configurations loaded with dispenser, bomb, and rocket based on aircraft-store compatibility test and evaluation procedures before KT-1P is operated as a light attack aircraft. The weapon system ground test for installation and flight test for envelope expansion including store separation are described in this paper, which was performed referring 'seek eagle program' under MIL-HDBK-1763 and MIL-HDBK-244A.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.255-263
• /
• 2017

An infrared-guided missile has been emerging as a major threat against combat aircraft due to its passive guidance characteristics and with recent advances in stealth technology. Hence, the infrared stealth technology and its effectiveness-evaluation technique become more significant than ever before. In this study, we applied missile aerodynamics to lethal range calculation which allowed more precise prediction. CFD analyses were newly involved in estimating drag force characteristics of an infrared-guided missile. Velocity profiles during flight period of the missile were constructed utilizing these drag characteristics and then incorporated into our in-house code to predict corresponding lethal ranges. The results showed that the present method can predict lethal range more appropriately than the previous one with constant velocity profile. As one of the results, if a fighter gains altitude more which reduces less drag of the attacking missile, then the lethal envelope increases significantly more compared to the lock-on envelope.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.15-19
• /
• 2013

Tail wing is important to designing of civil aircrafts, because it is responsible for aircraft stability and control. Tail wing has a role in aircraft control and makes aircraft fly stably without any pilot control input. Also, designing of tail wing determine trim drag force in whole aircraft. Center of gravity(CG) of aircraft travels with various effects as placement of passenger's seats, location of cargo bay, etc. In designing horizontal tail volume, aircraft CG travel has to be considered to have margin so that it should be sized to provide adequate stability and control for the airplane's entire CG range throughout the flight envelope. Finally, it is essential to have sufficient elevator control to perform stall at forward CG for all flaps down configurations. Such stalls establish the FAR stall speed which airplane take-off and landing performance. This paper deals with the process for tail wing design regarding the aircraft CG travel and results for 95-seat type turboprop aircraft.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.43-46
• /
• 2006

축열식 가열기는 주로 초음속 지상추진 시험설비의 고고도 조건 모사를 위하여 구축되는 장비로 이외에도 로켓 엔진 노즐의 추력 보정시험, 가스터빈 엔진 연소기 모사시험에 범용으로 사용할 수 있다. 한국항공우주연구원에서 보유하고 있는 축열식 가열시스템은 마하 $2{\sim}5$, 고도 $0{\sim}25km$의 범위에서 구동하는 초음속 지상추진시험설비의 전온도 모사를 목적으로 설계되었으며, 최고 모사 온도 1,300 K, 최고 가압압력 3.5 MPa의 성능을 낸다. 본 논문에는 본 원에서 구축한 축열식 가열기의 목표로 한 일본 JAXA RJTF에 구축되어있는 축열식 가열기에 대하여 정리하도록 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.411-413
• /
• 2009

본 논문은 초음속 추진을 이용한 미사일 시스템에 대한 궤적최적화에 대한 연구를 소개한다. 초음속 추진 시스템은 외부비행조건과 내부 연소 환경에 따른 복잡하고 비선형성이 강한 추력특성을 가진다. 이러한 이유로 초음속 비행체의 운용에 있어 많은 구속조건을 가지며 일반 비행체보다 좁은 비행영역안에서 운용되어야 한다. 본 논문에서는 이러한 특성을 가지는 초음속 비행체의 궤적최적화를 수행하고 보다 효율적인 운용에 대한 비전을 제시하고자 한다. 궤적최적화는 일반적인 초음속 추진에 관련한 구속조건들을 고려하며 수행되었고, 궤적최적화 결과를 통해 얻어진 효율적 연료공급 및 노즐 목 면적 제어에 대한 일반적인 운용 및 응용방안에 대해서 고찰하고자 한다.

• 한국항공우주학회지
• /
• 제34권4호
• /
• pp.76-82
• /
• 2006

새로이 개발된 ALQ-X ECM 포드를 장착한 KF-16D 항공기의 플러터 해석을 수행하였다. 해석에 필요한 기체 고유진동모드 데이터를 지상진동시험 결과로써 직접 사용하는 방법을 제시하고 기존 자료를 이용하여 타당성을 확인하였다. 랜딩기어로 지지된 KF-16D 항공기에 대한 지상진동시험 결과를 비행 상태의 모달 데이터로 변환하였다. KF-16D 항공기에 ALQ-X를 장착한 형상과 기존의 ALQ-119 장착 형상에 대한 플러터 속도를 비교함으로써 새로이 개발된 ECM 포드를 기존의 ECM 포드와 동일한 비행영역에서 사용이 가능함을 입증하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.365-370
• /
• 2011

This paper presents the air-to-air missile autopilot design for a $180^{\circ}$ heading reversal maneuver during boost-phase. The missile's dynamics are linearized at a set of operating points for which angle of attack controllers are designed to cover an extended flight envelope. Then, angle of attack controllers are designed for this set of points, utilizing a pole-placement approach. The controllers' gains in the proposed configuration are computed from aerodynamic coefficients and design parameters in order to satisfy designer-chosen criteria. These design parameters are the closed-loop frequency, damping ratio, and time constant; these represent the characteristics of the control system. To cope with highly nonlinear and rapidly time varying dynamics during boost-phase, the global gain-scheduled controller is obtained by interpolating the controllers' gains over variations of the angle of attack, Mach number, and center of gravity. Simulation results show that the proposed autopilot design provides satisfactory performance and possesses good [ed: or "sufficient" or "excellent"] capabilities.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.293-302
• /
• 2019

In the past, there was a theory that influenza wasn't transmitted directly from birds but was infected to humans via swains. Recently, molecular level research has progressed, and it was confirmed that the avian influenza virus can directly infected to human lung and intestinal epithelial cells. Three pandemicsin the past 100 years were also infected to humans directly from birds. In view of such scientific background, we are developing a method for screening sick birds by monitoring the physiological characteristics of birds in a contactless manner with sensors. Here, the movement of respiratory muscles and abdominal muscles under autonomic innervation was monitored using a magnet and Hall sensor sewn on the thoracic wall, and other multimedia devices. This paper presents and discusses the results of experiments involving continuous periodic noise discovered during flight experiments with a data logger mounted on a Japanese pheasant from 2012 to 2015. A brief summary is given as the below: 1. Magnet and Hall sensor sewn to the left and right chest walls, bipolar electrocardiograms between the thoracic walls, posterior thoracic air sac pressure, angular velocity sensors sewn on the back and hips, and optical reflection of LEDs (blue and green) from the skin of the hips allow observation of periodic vibrations(fasciculations) in the waves. No such analysis has been reported before. 2. These fasciculations are presumed to be derived from muscle to maintain and control air sac pressure. 3. Since each muscle fiber is spatially Gaussian distributed from the sympathetic nerve, the envelope is assumed to plot a Gaussian curve. 4. Since avian trunk muscles contract periodically at all time, we assume that the sympathetic nerve dominates in their control. 5. The technique of sewing a magnet to the thoracic wall and measuring the strength of the magnetic field with a Hall sensor can be applied to screen for early stage of avian influenza, with a sensor attached to the chicken enclosure.