• 대한임베디드공학회논문지
• /
• 제10권5호
• /
• pp.317-324
• /
• 2015

In his paper, we propose the graphic-based direction tracking system that be able to detect the current location and direction of the flight object and virtually run the pointing to the flight direction when a small UAV is located in the occlusion area behind buildings or obstacles in the moving surveillance systems. Based on the experimental results about the simulation flight path extracted from the Mission Planner we found the proposed system operates the desired flight mission effectively in tracking.

• 한국환경과학회지
• /
• 제23권3호
• /
• pp.387-397
• /
• 2014

This study is carried out to propose an empirical equation which can promptly predict the aircraft noise level at a specific point (a receptor) near Jeju international airport by using the information of the flight path data. For this purpose, Analyses of multiple linear regression with the slant distances (SD) calculated from the gate analyses of the flight path data, aircraft noise certification levels with unit of EPNL(effective perceived noise level) and noise levels measured at receptors are performed by SPSS package. From these regression analyses for approach and departure of aircraft, we can propose empirical equations which is statistically significant. The noise levels predicted by these empirical equations are highly correlated the measured data.

• Journal of Radiation Protection and Research
• /
• 제26권3호
• /
• pp.327-331
• /
• 2001

The Pohang Neutron Facility based on an electron linac was constructed in order to construct the infrastructure for nuclear data production in Korea. It consists of a 100-MeV electron linac, a water-cooled Ta target, and an 11-m time-of-flight path. We measured the time-of-flight path length, the neutron energy spectra for different water levels inside the moderator, and the neutron total cross sections of polyethylene and copper by the transmission method.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권3호
• /
• pp.235-252
• /
• 2015

Optimal impact angle control guidance law and its variants for intercepting a maneuvering target are introduced in this paper. The linear quadratic(LQ) optimal control theory is reviewed first to setup framework of guidance law derivation, called the sweep method. As an example, the inversely weighted time-to-go energy optimal control problem to obtain the optimal impact angle control guidance law for a fixed target is solved via the sweep method. Since this optimal guidance law is not applicable for a moving target due to the angle mismatch at the impact instant, the law is modified to three different biased proportional navigation(PN) laws: the flight path angle control law, the line-of-sight(LOS) angle control law, and the relative flight path angle control law. Effectiveness of the guidance laws are verified via numerical simulations.

• 한국멀티미디어학회논문지
• /
• 제25권8호
• /
• pp.1007-1021
• /
• 2022

Autonomous driving of unmanned aerial vehicles may have to pay expensive cost to create and switch new routes if unexpected obstacles exist or local map updates occured by the control system due to incorrect route information. Integrating digital twins into the path-following process requires more computing resources to quickly switch the wrong path to an alternative path, but it can quickly update the path during flight. In this study, we design a DEVS-based simulation environment which can modify optimized paths through short-term simulation of multi-virtual UAVs for applying digital twin concepts to path follow. Through simulation, we confirmed the possibility of increasing the mission stability of UAV.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.916-924
• /
• 2008

In this paper dynamic modeling parameters were estimated using a frequency domain estimation method. A systematic flight test method was employed using preprogrammed multistep excitation of the swashplate control input. In addition when one axis is excited, the autopilot is engaged in the other axis, thereby obtaining high-quality flight data. A dynamic model was derived for a small scale unmanned helicopter (CNUHELI-020, developed by Chungnam National University) equipped with a Bell-Hiller stabilizer bar. Six degree of freedom equations of motion were derived using the total forces and moments acting on the small scale helicopter. The dynamics of the main rotor is simplified by the first order tip-path plane, and the aerodynamic effects of fuselage, tail rotor, engine, and horizontal/vertical stabilizer were considered. Trim analysis and linearized model were used as a basic model for the parameter estimation. Doublet and multistep inputs are used to excite dynamic motions of the helicopter. The system and input matrices were estimated in the frequency domain using the equation error method in order to match the data of flight test with those of the dynamic modeling. The dynamic modeling and the flight test show similar time responses, which validates the consequence of analytic modeling and the procedures of parameter estimation.

• 한국멀티미디어학회논문지
• /
• 제25권2호
• /
• pp.237-246
• /
• 2022

Among the technologies of the 4th industrial revolution, drones that have grown rapidly and are being used in various industries can be operated by the pilot directly or can be operated automatically through programming. In order to be controlled by a pilot or to operate automatically, it is essential to predict and analyze the optimal path for the drone to move without obstacles. In this paper, after securing and analyzing the pilot training dataset through the unmanned aerial vehicle piloting training platform designed through prior research, the profile of the dataset that should be preceded to search and derive the optimal route of the unmanned aerial vehicle was designed. The drone pilot training data includes the speed, movement distance, and angle of the drone, and the data set is visualized to unify the properties showing the same pattern into one and preprocess the properties showing the outliers. It is expected that the proposed big data-based profile can be used to predict and analyze the optimal movement path of an unmanned aerial vehicle.

• 한국추진공학회지
• /
• 제25권6호
• /
• pp.36-44
• /
• 2021

스크램제트 엔진 비행시험체의 굽어진 중앙동체 내부 유로에서 발생하는 충격파-경계층 상호작용에 대한 수치해석을 수행하였다. 수치해석에는 압축성 Raynolds Averaged Navier Stokes(RANS) 방정식에 난류모델 k-ω SST을 사용하였다. 대표적으로 노즐 윗 벽면의 박리기포, 오목한 충격파와 경계층의 상호작용, 모서리의 충격파-충격파 상호작용이 포착되었다. 해석 결과는 굽어진 내부 유로의 충격파-경계층 상호작용을 가시화하여 이해를 높이고 설계 유의점을 제시하였다.

• Spatial Information Research
• /
• 제15권4호
• /
• pp.363-370
• /
• 2007

본 연구는 지형참조항법(TRN; Terrain Referenced Navigation)에 근거하는 헬리콥터 항법 시스템을 위한 기본 알고리즘을 개발하기 위해 수행되었다. 현재 본 연구에 위성 항법장치(GPS; Global Positioning System)로부터의 정보(X, Y, Z 좌표)는 비행체가 항로를 비행하는 중 매 92.8m의 수평거리로 환산하여 수신되는 것으로 가정하였다. 비행체는 3차원 직교 좌표 체계(Cartesian coordinate system)로 표현되는 수치지형모델(DTM; Digital Terrain Model)상에서 시점(Origination)-종점(Destination) 분석 기법에 의해 항로를 결정한다. 본 시스템은 우선 조종사에게 지형의 사전 인식을 위해 시점-종점 주변 3차원 지형도와 항로의 종단면도를 보여준다. 본 시스템은 직접적인 지상 충돌을 피하기 위해 지형 여유 층면(terrain clearance floor)의 개념을 도입, 기복 지형 표면에 일정 높이의 완충 공간을 설정한다. 만약 비행체가 항행 중 완충 공간에 접근하게 되면 본 시스템은 실시간으로 즉시 경고음과 메시지를 발한다(Matlab 메뉴를 사용하였음). 물론 헬리콥터의 이착륙 시에는 불필요한 경고를 발생시키지 않기 위해 완충 공간 조정은 가능하다. 수치지형모델은 (주)첨성대가 확보하고 있는 3초 간격의 DTM을 채택, 작성하였다.

• 한국군사과학기술학회지
• /
• 제18권2호
• /
• pp.115-124
• /
• 2015

A methodology is proposed to estimate a trajectory of a flying target and its velocity using the time and frequency analysis of the acoustic signal. The measurement of sound emitted from a flying acoustic source with a microphone above a ground shall receive both direct and ground-reflected sound waves. For certain frequency contents, the destructive interference happens in received signal waveform reflected path lengths are in multiple integers of direct path length. This phenomenon is referred to as the acoustical mirror effect and it can be observed in a spectrogram plot. The spectrogram of acoustic measurement for a flying vehicle measurement shows several orders of destructive interference curves. The first or second order of curve is used to find the best approximate path by using nonlinear least-square method. Simulated acoustic signal is generated for the condition of known geometric of a sensor and a source in flight. The estimation based on cepstrogram analysis provides more accurate estimate than spectrogram.