• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.86-94
• /
• 2022

전 세계적으로 철근의 부식으로 인해 발생하는 철근 콘크리트 구조물의 성능 저하를 해결하기 위하여, FRP를 철근으로 대체하는 것은 상당한 주목을 받고 있으며, FRP 물성을 향상시켜 구조물의 사용 수명을 연장하기 위한 기술 개발이 진행되어 왔다. 이에 따라, 고강도 및 고강성을 갖는 국산형 CFRP rod와 CFRP grid의 개발 및 제조 기술이 필요하며, 이를 적용한 구조 부재의 거동을 평가한 연구가 수행되어야 한다. 본 연구에서는 국내 시범 생산 CFRP rod를 보강근으로 사용한 보 부재의 휨 전단 거동을 보강비와 전단 경간비에 따라 검토하였다. 그 결과, 일정 범위를 벗어난 보강비를 사용할 경우, CFRP rod에 의한 성능 개선 효과가 상쇄되거나 효과가 크지 않는 것으로 나타났다. 한편, CFRP rod를 사용한 보 부재의 경우, 국내 구조 설계 기준에 근거하여 전단 철근을 배치하더라도 전단 파괴 가능성이 발생하였다. 그러므로 CFRP rod를 사용한 보 부재의 경우, 보강비 제한과 전단파괴를 방지하기 위한 검토가 필요한 것으로 판단된다. 또한, CFRP rod를 사용한 보 부재의 연성은 변형 에너지 평가방법에 따라 결정되므로, 보 부재의 구조 거동을 반영한 변형 에너지 평가법을 적용하여 연성을 평가해야 한다.

• International Journal of Concrete Structures and Materials
• /
• 제18권1E호
• /
• pp.55-61
• /
• 2006

RC shear walls are frequently used as lateral force-resisting system in building construction because they have sufficient stiffness and strength against damage and collapse. If RC shear walls are properly designed and proportioned, these walls can also behave as ductile flexural members like cantilevered beams. To achieve this goal, the designer should provide adequate strength and deformation capacity of shear walls corresponding to the anticipated deformation level. In this study, the level of demands for deformation of shear walls was investigated using a displacement-based design approach. Also, deformation capacities of shear walls are evaluated through laboratory tests of shear walls with specific transverse confinement widely used in Korea. Four full-scale wall specimens with different wall boundary details and cross-sections were constructed for the experiment. The displacement-based design approach could be used to determine the deformation demands and capacities depending on the aspect ratio, ratio of wall area to floor plan area, flexural reinforcement ratio, and axial load ratio. Also, the specific boundary detailing for shear wall can be applied to enhance the deformation capacity of the shear wall.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.167-182
• /
• 2018

The modeling of loss of bond between reinforcing bars (rebars) and concrete due to corrosion is useful in studying the behavior and prediction of residual load bearing capacity of corroded reinforced concrete (RC) members. In the present work, first the possibility of using different methods to simulate the rebars-concrete bonding, which is used in three-dimensional (3D) finite element (FE) modeling of corroded RC beams, was explored. The cohesive surface interaction method was found to be most suitable for simulating the bond between rebars and concrete. Secondly, using the cohesive surface interaction approach, the 3D FE modeling of the behavior of non-corroded and corroded RC beams was carried out in an ABAQUS environment. Experimental data, reported in literature, were used to validate the models. Then using the developed models, a parametric study was conducted to examine the effects of some parameters, such as degree and location of the corrosion, on the behavior and residual capacity of the corroded beams. The results obtained from the parametric analysis using the developed model showed that corrosion in top compression rebars has very small effect on the flexural behaviors of beams with small flexural reinforcement ratio that is less than the maximum ratio specified in ACI-318-14 (singly RC beam). In addition, the reduction of steel yield strength in tension reinforcement due to corrosion is the main source of reducing the load bearing capacity of corroded RC beams. The most critical corrosion-induced damage is the complete loss of bond between rebars and the concrete as it causes sudden failure and the beam acts as un-reinforced beam.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.579-584
• /
• 2001

The reinforced concrete(RC) beam is developed cracks because the compression strength of concrete is strong but the tensile strength is weak. The structural strength and stiffness is decreased by reduction of tension resistance capacity of concrete due to the developed cracks. Using the fiber reinforced concrete that is increased the flexural strength and tensile strength at tensile part can enhance the strength and stiffness of concrete structure and decrease the tensile flexural cracks and deflection. Therefore, The reinforced concrete used the fiber reinforced concrete at tensile part ensure the safety and serviceability of the concrete structures. In this study, analytical model of a dual concrete beam that is composed of the normal strength concrete at compression part and the high tensile strength concrete at tensile part is developed by using the equilibrium condition of forces and compatibility condition of strains and is parted into elastic analytical model and ultimate analytical model. Three group of test beam that is formed of one reinforced concrete beam and two dual concrete beams for each steel reinforcement ratio is tested to examine the flexural behavior of dual concrete beams. The comparative study of total nine test beams is shown that the ultimate load of a dual concrete beams relative to the reinforced concrete beams have an increase in approximately 30%. In addition, the initial flexural rigidity, as used here, refer to the slope of load-deflection curves in elastic state is increased and the deflection is decreased.

• Computers and Concrete
• /
• 제6권5호
• /
• pp.357-376
• /
• 2009

In the design of concrete columns, it is important to provide some nominal flexural ductility even for structures not subjected to earthquake attack. Currently, the nominal flexural ductility is provided by imposing empirical deemed-to-satisfy rules, which limit the minimum size and maximum spacing of the confining reinforcement. However, these existing empirical rules have the major shortcoming that the actual level of flexural ductility provided is not consistent, being generally lower at higher concrete strength or higher axial load level. Hence, for high-strength concrete columns subjected to high axial loads, these existing rules are unsafe. Herein, the combined effects of concrete strength, axial load level, confining pressure and longitudinal steel ratio on the flexural ductility are evaluated using nonlinear moment-curvature analysis. Based on the numerical results, a new design method that provides a consistent level of nominal flexural ductility by imposing an upper limit to the axial load level or a lower limit to the confining pressure is developed. Lastly, two formulas and one design chart for direct evaluation of the maximum axial load level and minimum confining pressure are produced.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.829-847
• /
• 2016

This paper investigates the flexural capacity of simply supported steel-concrete composite I beam and box beam under positive bending moment through combined experimental and finite element (FE) modeling. 24 composite beams are included into the experiments and parameters including shear connection degree, transverse reinforcement ratio, section form of girder, diameter of stud and loading way are also considered and investigated. ABAQUS is employed to establish FE models to simulate the behavior of composite beams. The influences of a few key parameters, such as the shear connection degree, stud arrangement, stud diameter, beam length and loading way, on flexural capacity are discussed. In addition, three methods including GB standard, Eurocode 4, and Nie method are also used to estimate the flexural capacity of composite beams and also for comparison with experimental and numerical results. The results indicate that Nie method may provide a better estimation in comparison to other two standards.

• Computers and Concrete
• /
• 제32권2호
• /
• pp.173-184
• /
• 2023

In this study, mechanical, flexural post-cracking, and torsional behaviors of recycled steel fiber-reinforced concrete (RSFRC) incorporating steel fibers obtained from recycling of waste tires were investigated. Initially, three concrete mixes with different fiber contents (0, 40, and 80 kg/m³) were designed and tested in fresh and hardened states. Subsequently, the flexural post-cracking behaviors of RSFRCs were assessed by conducting three-point bending tests on notched beams. It was observed that recycled steel fibers improve the post-cracking flexural behavior in terms of energy absorption, ductility, and residual flexural strength. What's more, torsional behaviors of four RSFRC concrete beams with varying reinforcement configurations were investigated. The results indicated that RSFRCs exhibited an improved post-elastic torsional behaviors, both in terms of the torsional capacity and ductility of the beams. Additionally, numerical analyses were performed to capture the behaviors of RSFRCs in flexure and torsion. At first, inverse analyses were carried out on the results of the three-point bending tests to determine the tensile functions of RSFRC specimens. Additionally, the applicability of the obtained RSFRC tensile functions was verified by comparing the results of the conducted experiments to their numerical counterparts. Finally, it is noteworthy that, despite the scatter (i.e., non-uniqueness) in the aspect ratio of recycled steel fiber (as opposed to industrial steel fiber), their inclusion contributed to the improvement of post-cracking flexural and torsional capacities.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.40-47
• /
• 2021

이 연구는 후크형 강섬유의 체적비 및 형상비에 따른 콘크리트 설계기준강도 30MPa를 갖는 콘크리트의 역학적 특성, 휨 및 압축거동에 미치는 영향에 대하여 분석한다. 실험에서 형상비가 상이한 3종류의 섬유가 사용되었다. 섬유의 형상비는 64, 67, 80이며 섬유의 보강량은 체적비 0.25%, 0.50% 및 0.75%가 선정되었다. 강섬유 보강 콘크리트의 휨거동은 하중-균열폭 곡선, 휨강도 및 휨인성이 평가되었다, 압축거동은 압축응력-변형률 관계 곡선, 압축강도 및 인성 등이 평가되었다. 실험결과로부터 강섬유 보강 콘크리트의 휨강도, 휨인성 및 파괴에너지는 강섬유 혼입량이 증가됨에 따라 향상되는 것으로 나타났다. 그러나 형상 64와 67인 강섬유로 보강된 콘크리트의 역학적 특성은 큰 차이를 보이지 않았다. 이 연구에서 검토된 강섬유 보강 콘크리트의각 배합에 대한 유럽기준(MC2010)에 의한 산정된 휨 잔여강도는 기준에서 인장 철근 또는 보강 매쉬를 대체할 수 있는 한계기준을 모두 충족하는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제20권3호
• /
• pp.393-404
• /
• 2008

철근콘크리트 휨 부재에서 현행 설계기준들의 처짐 계산 규정은 콘크리트의 균열 후 보의 휨강성이 감소하는 것을 반영한 유효 단면2차모멘트의 개념을 적용하고 있다. 그러나 기준식의 유효 단면2차모멘트는 하중을 받는 보의 최대 모멘트와 균열모멘트에 의하여 계산하며, 처짐에 영향을 미치는 경간, 단부구속, 단면의 크기, 하중 분포, 재료 및 단면 성질, 균열의 양과 확장 등의 여러 영향인자들에 대하여는 적절한 고려가 이루어지지 않았다. 따라서, 이 연구에서는 철근콘크리트 단순보를 대상으로 처짐 계산에 필요한 유효 단면2차모멘트에 대한 실험 자료를 제공하고, 국내 기준식 및 다른 연구자들의 제안식을 수정 보완하여 제안하는 것을 목적으로 하였다. 콘크리트강도와 피복두께, 철근비 및 철근 직경을 주요변수로 하여 총 14개의 철근콘크리트 보 실험체를 제작하였으며, 실험을 통하여 구한 유효 단면2차모멘트와 설계 기준에 의한 값, 기존의 제안식 및 본 연구에서 제안된 식에 의한 값들을 비교 분석하였다. 실험 결과를 바탕으로 균열 구간의 길이, 철근비 및 철근 한 개당 콘크리트의 유효 인장단면적을 고려하여 이 연구에서 제안한 유효 단면2차모멘트 예측식은 기존의 제안식들에 비하여 실험값에 더욱 근접한 결과를 나타내었다.

• 한국지진공학회논문집
• /
• 제19권2호
• /
• pp.75-83
• /
• 2015

The purpose of this study is to improve the previous damage evaluation model for RC members which is proposed by Igarashi[1] in 2010.The previous model was not confirmed by enough data of damage such as, residual crack length, width and area for exfoliation of concrete, etc. In addition, validation of the model is still insufficient. Therefore, experiment of a real-scale RC structure and experiment of RC columns using the high-strength concrete were conducted to gather the data of damage in RC members. The investigation has been conducted gathering the data not only additional experiments data but also existing data for modification of damage evaluation model. It has been investigated on changing damage in RC due to axial force ratio, shear reinforcement and shear span ratio. As a result, several problems were founded in the previous model, such as, hinge length($l_p$), spacing of flexural crack($S_{av,f}$), total width of flexural cracks regulated by maximum width of flexural crack($n_f$) and total width of shear cracks regulated by maximum width of shear crack($n_s$). New model is proposed and evaluated the damage properly.