Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Study on flexural capacity of simply supported steel-concrete composite beam

  • Liu, Jing (School of Civil Engineering, Central South University) ;
  • Ding, Fa-xing (School of Civil Engineering, Central South University) ;
  • Liu, Xue-mei (School of Civil Engineering and Built Environment, Queensland University of Technology) ;
  • Yu, Zhi-wu (School of Civil Engineering, Central South University)
  • Received : 2016.02.04
  • Accepted : 2016.06.17
  • Published : 2016.07.20
⟨ Previous Next ⟩

Abstract

This paper investigates the flexural capacity of simply supported steel-concrete composite I beam and box beam under positive bending moment through combined experimental and finite element (FE) modeling. 24 composite beams are included into the experiments and parameters including shear connection degree, transverse reinforcement ratio, section form of girder, diameter of stud and loading way are also considered and investigated. ABAQUS is employed to establish FE models to simulate the behavior of composite beams. The influences of a few key parameters, such as the shear connection degree, stud arrangement, stud diameter, beam length and loading way, on flexural capacity are discussed. In addition, three methods including GB standard, Eurocode 4, and Nie method are also used to estimate the flexural capacity of composite beams and also for comparison with experimental and numerical results. The results indicate that Nie method may provide a better estimation in comparison to other two standards.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Chang, X., Luo, X.L., Zhu, C.X. and Tang, C.A. (2014), "Analysis of circular concrete-filled steel tube support in high ground stress conditions", Tunn. Undergr. Sp. Tech., 43(3), 41-48. https://doi.org/10.1016/j.tust.2014.04.002
  2. Chang, X., Wang, J.H., Zhang, Z.H. and Tang, C.A. (2015), "Effects of interface behavior on fracture spacing in layered rock", Rock Mech. Rock Eng., 49(5), 1733-1746.
  3. Ding, F.X., Ying, X.Y., Zhou, L.C. and Yu, Z.W. (2011), "Unified calculation method and its application in determining the uniaxial mechanical properties of concrete", Front. Archit. Civ. Eng. China, 5(3), 381-393. https://doi.org/10.1007/s11709-011-0118-6
  4. Ding, F.X., Liu, J. and Liu, X.M. (2016), "Flexural stiffness of steel-concrete composite beam under positive moment", Steel Compos. Struct., Int. J., 20(6), 1369-1389. https://doi.org/10.12989/scs.2016.20.6.1369
  5. Eurocode 4, European Standard (2004), Design of composite steel and concrete structures, Part 1.1: General rules and rules for buildings-General rules, EN 1994-1-1.
  6. Fan, J.S., Nie, J.G. and Li, Q.W. (2010a), "Long-term behavior of composite beams under positive and negative bending (I)-Experimental study", J. Struct. Eng., 136(7), 849-857. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000175
  7. Fan, J.S., Nie, X. and Li, Q. (2010b), "Long-term behavior of composite beams under positive and negative bending. II: Analytical study", J. Struct. Eng., 136(7), 858-865. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000176
  8. GB 50017-2003, China Standard (2003), Code for design of steel structures; China Planning Press, Beijing, China.
  9. Geng, Y., Wang, Y.Y., Ranzi, G. and Wu, X. (2014), "Time-dependent analysis of long-span, concrete-filled steel tubular arch bridges", J. Bridge Eng., 19(4), 111-122.
  10. Hibbitt, Karlson & Sorensen Inc. (2003), ABAQUS/standard User's Manual, Version 6.4.1., Pawtucket, RI, USA.
  11. Hicks, S.J. and Pennington, A. (2015), "Partial factors for the design resistance of composite beams in bending", J. Construct. Steel Res., 105(2), 74-85. https://doi.org/10.1016/j.jcsr.2014.10.023
  12. Liu, C.Y., Wang, Y.Y., Wang, W. and Wu, X. (2014), "Seismic performance and collapse prevention of concrete-filled thin-walled steel tubular arches", Thin-Wall. Struct., 80(1), 91-102. https://doi.org/10.1016/j.tws.2014.03.005
  13. Mirza, O. and Uy, B. (2011), "Behaviour of composite beam-column flush end-plate connections subjected to low-probability, high-consequence loading", Eng. Struct., 33(2), 647-662. https://doi.org/10.1016/j.engstruct.2010.11.024
  14. Mohammad, R.S. (1999), "Modeling of bond-slip in steel-concrete composite beams and reinforcing bars", Ph.D. Dissertation; University of Colorado, CO, USA.
  15. Nie, J.G. (2005), Test, Theory and Application of Steel- Concrete Composite Beam, Science Press, Beijing, China. [In Chinese]
  16. Nie, J.G. and Cai, C.S. (2003), "Steel-concrete composite beams considering shear slip effects", J. Struct. Eng., 129(4), 495-506. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(495)
  17. Johnson, R.P. (1994), Composite Structures of Steel and Concrete, Blackwell Scientific, Oxford, UK.
  18. Kim, S.H., Jung, C.Y. and Ahn, J.H. (2011), "Ultimate strength of composite structure with different degrees of shear connection", Steel Compos. Struct., Int. J., 11(5), 375-390. https://doi.org/10.12989/scs.2011.11.5.375
  19. Ollgaard, J.G., Roger, G.S. and John, W.F. (1971), "Shear strength of stud connectors in lightweight and normal-weight concrete", AISC Eng. J., 8(2), 55-64.
  20. Salari, MR. (1999), "Modeling of bond-slip in steel-concrete composite beams and reinforcing bars", Ph.D. Dissertation; University of Colorado at Boulder, CO, USA.
  21. Selçuk, E.G. and Metin, H. (2013), "Ultimate behavior of composite beams with shallow I-sections", Steel Compos. Struct., Int. J., 14(5), 493-509. https://doi.org/10.12989/scs.2013.14.5.493
  22. Souici, A., Berthet, J.F., Li, A. and Rahal, N. (2013), "Behaviour of both mechanically connected and bonded steel-concrete composite beams", Eng. Stuct., 49(4), 11-23.
  23. Tao, M.X. and Nie, J.G. (2014), "Fiber beam-column model considering slab spatial composite effect for nonlinear analysis of composite frame systems", J. Struct. Eng. 140(1), 896-912.
  24. Vasdravellis, G., Uy, B. and Kirkland, B. (2015), "Behaviour and design of composite beams subjected to sagging bending and axial compression", J. Construct. Steel Res., 110(7), 29-39. https://doi.org/10.1016/j.jcsr.2015.03.010
  25. Wang, Q.T. and Chang, X. (2013), "Analysis of concrete-filled steel tubular columns with T shaped cross section", Steel Compos. Struct., Int. J., 15(1), 41-55. https://doi.org/10.12989/scs.2013.15.1.41
  26. Zhao, H.L., Yu, Y. and Ye, Z.M. (2012), "Simplified nonlinear simulation of steel-concrete composite beams", J. Construct. Steel Res., 71(4), 83-91. https://doi.org/10.1016/j.jcsr.2011.08.015
  27. Zhou, W.B., Li, S.J. and Jiang, L.Z. (2015), "Distortional buckling calculation method of steel-concrete composite box beam in negative moment area", Steel Compos. Struct., Int. J., 19(5), 1203-1219. https://doi.org/10.12989/scs.2015.19.5.1203
  28. Zhou, W.B., Li, S.J. and Huang, Z. (2016), "Distortional buckling of I-steel-concrete composite beams in negative moment area", Steel Compos. Struct., Int. J., 20(1), 57-70. https://doi.org/10.12989/scs.2016.20.1.057

Cited by

  1. Steel-HSC composite beams with partial shear connection and miniaturized limited-slip-capacity connectors 2017, https://doi.org/10.1002/stco.201710024
  2. Experimental investigation on hysteretic behavior of simply supported steel-concrete composite beam vol.144, 2018, https://doi.org/10.1016/j.jcsr.2018.01.018
  3. Residual deflection analysis in negative moment regions of steel-concrete composite beams under fatigue loading vol.158, 2018, https://doi.org/10.1016/j.conbuildmat.2017.09.075
  4. Behavior of steel-reinforced concrete-filled square steel tubular stub columns under axial loading vol.119, 2017, https://doi.org/10.1016/j.tws.2017.07.021
  5. Improved Finite Beam Element Method to Analyze the Natural Vibration of Steel-Concrete Composite Truss Beam vol.2017, 2017, https://doi.org/10.1155/2017/5323246
  6. Natural vibration analysis of steel–concrete composite box beam using improved finite beam element method 2018, https://doi.org/10.1177/1369433217734638
  7. Dynamic characteristic study of composite box beam with corrugated webs considering interface slip and shear deformation vol.189, pp.1755-1315, 2018, https://doi.org/10.1088/1755-1315/189/2/022015
  8. Investigation on the Structural Behavior of Shear Walls with Steel Truss Coupling Beams under Seismic Loading vol.2018, pp.1687-8442, 2018, https://doi.org/10.1155/2018/5602348
  9. Behaviour of steel-concrete composite beams using bolts as shear connectors vol.143, pp.1755-1315, 2018, https://doi.org/10.1088/1755-1315/143/1/012027
  10. Behavior of concrete-filled round-ended steel tubes under bending vol.25, pp.4, 2016, https://doi.org/10.12989/scs.2017.25.4.457
  11. Behavior of headed shear stud connectors subjected to cyclic loading vol.25, pp.6, 2016, https://doi.org/10.12989/scs.2017.25.6.705
  12. Behavior of polygonal concrete-filled steel tubular stub columns under axial loading vol.28, pp.5, 2016, https://doi.org/10.12989/scs.2018.28.5.573
  13. Use of UHPC slab for continuous composite steel-concrete girders vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.321
  14. Effect of residual stress and geometric imperfection on the strength of steel box girders vol.34, pp.3, 2016, https://doi.org/10.12989/scs.2020.34.3.423
  15. Static behavior of bolt connected steel-concrete composite beam without post-cast zone vol.38, pp.4, 2021, https://doi.org/10.12989/scs.2021.38.4.365
  16. Analysis of Equivalent Flexural Stiffness of Steel-Concrete Composite Beams in Frame Structures vol.11, pp.21, 2021, https://doi.org/10.3390/app112110305