• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1999년도 가을 학술발표논문집 Vol.26 No.2 (3)
• /
• pp.783-785
• /
• 1999

Distributed Object Systems are very complex. So, it is difficult to see overall relationship among objects participated in the system. Moreover the performance tuning or maintenance are also important issues of it. So, it needs a way to view the system with low-cost and an efficient method. One of solutions is a visualization tool or system. In this paper, we proposed a tracing facility for Java-based distributed object system, especially RM(Remote Method Invocation). Our up-coming visualization system will use two phase hybrid post-mortem/on-the-fly technique. To support it, the fundamental tracing part must have some flexible and dynamic mechanism. The main idea of our tracing technique is the Plug-in Sensor Model(PSM). The relationship between tracing (monitoring) part and visualization part is closely related. So, we considered the appropriate factors for visualization. We developed 'Traced RMI(TRMI)'. For more precise visualization of a working system, the casuality of events has to be preserved. TRMI can support global event ordering.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.223-229
• /
• 2003

Tool wear monitoring is an important technique in the flexible manufacturing system. This paper studies the end mill wear detection using CCD camera and pattern recognition method. When the end mill working in the machining center, the bottom edge of the end mill geometry change, this information is used. The CCD camera grab the new and worn tool geometry and the area of the tool geometry was compared. In this result, when the values of the subtract worn tool from new tool end in 200 pixels, it decides the tool life. This paper proposed the new method of the end mill wear detection.

• 반도체디스플레이기술학회지
• /
• 제4권4호
• /
• pp.5-8
• /
• 2005

In this study, we prepared the ITO thin film for TOLED(Top-emitting OLED) or flexible display at room temperature using the FTS(Facing Targets Sputtering Apparatus). We observed characteristics of deposited thin films as a function of sputtering conditions. XRD patterns were independence trom oxygen gas flow and input current. But electrical and optical properties were strongly dependence. In the results, we could prepare good properties of ITO thin films resistivity of $4.27X10^{-4}[\Omega-cm]$, transmittance of over 80% at working gas pressure 1[mTorr], input current 0.6[A], oxygen gas ratio 0.3[sccm], at room temperature.

• 한국보건간호학회지
• /
• 제13권1호
• /
• pp.77-87
• /
• 1999

Poverty directly affects health and well-being, The poor population has a higher rate of chronics illness. higher infant morbidity and motality rates. shorter life expectancy. more complex health problems. and greater physical limitations resulting from chronic disease. In order to activate primary health care for the poverty in urban area the following measures should be taken : 1. Health center must be expended or establish subhealth center. 2. Health center must monitor neighbour's workplace's health management for their working population. 3. Health centers must do active home visiting nursing care for the urban-poor. 4. Health center must carry out flexible problem-centered practice according to the area. 5. For the urban-poor's health care must have organization of the health center & practice according to community's characteristics. 6. Public health care must be closely connected with welfare. 7. For the health care of the urban-poor must demand active community participation. 8. Health center is closely connected with Community hospital. 9. Active management of public health resource system is demanded.

• 가족자원경영과 정책
• /
• 제18권2호
• /
• pp.17-35
• /
• 2014

This study analyzes the transition of the Family-Friendly Index from 2007 to 2012. This index was developed using a questionnaire survey that is distributed to listed companies and public institutions every year by the Ministry of Gender Equality & Family(MOGEF) and the Family-Friendly Support Center. The Family-Friendly Index contains an introduction to and the practical use of family-friendly regulations and programs, such as flexible working systems, parental leave, family leave, EAP, and family-friendly culture. The number of companies involved in the Family-Friendly Index is increasing every year, and has increased from 41.7 in 2007 to 58.9 in 2012. In particular, family-friendly companies testimonialized by the MOGEF are using more family-friendly programs than other company.

• 산업공학
• /
• 제9권3호
• /
• pp.298-305
• /
• 1996

Cold rolling mill process in steel works uses stands of rolls to flatten a strip to a desired thickness. Most of rolling processes use mathematical models to predict rolling force which is very important to decide the resultant thickness of a coil. In general, these mathematical models are not flexible for variant coil types and cannot handle various elements which is practically important to decide accurate rolling force. A corrective neural network is proposed to improve the accuracy of rolling force prediction. Additional variables-composition of the coil, coiling temperature and working roll parameters-are fed to the network. The model uses an MLP with BP to predict a corrective coefficient. The test results using 1,586 process data collected at POSCO in early 1995 show that the proposed model reduced the prediction error by 30% on average.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.285-292
• /
• 2003

The soft structure can make large space more effectively, and its construction is easy and simple as well. However, it is not easy to realize this in the actual space. Therefore, two works are needed to be done for effective and accurate construction of soft structures. First, making a working scenario to complete the final objective form; second revising construction errors occurred in the middle of the actual works. These works are called constructional analysis. At this time, geometric nonlinearity should be considered to reflect the sensitivity by the initial stress of flexible structures, constructional analysis comes down to a nonlinear problem after all. This study approaches nonlinear constructional analysis with the numerical method for adjusting stress of cable-dome structures which are a soft structure system, and then verifies it.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.419-423
• /
• 2005

In microfactory, loading/unloading mechanism supply the row material to processing machines for manufacturing process such as pressing, cutting, plastic deformation. This mechanism for rnicrofactory is designed as modularity robot. Microfactory system have to be flexible structure for variety product item. For system flexibility, applied mechanisms are developed as moduality. Robot moduality needs the specific characteristics which are different from one of macro, typical robot system. In this paper, we discussed about the modularity robot. and proposed the loading/unloading mechanism for working in microfactory system.

• 제어로봇시스템학회논문지
• /
• 제11권4호
• /
• pp.344-352
• /
• 2005

The modem production systems are required to produce many items. This is due to the fact that society has become more complex and the customers' demands have become more varied. The demand for complex production systems of various purposes, which can flexibly change the content of work, has increased. One of such production systems is FMS (Flexible Manufacturing System). Limited resources must be used in FMS when a number of working procedures are simultaneously being undertaken because the conditions of stand-by job processes cannot be changed. Researchers are currently being conducted to determine ways of preventing deadlocks. In this study, we proposes the algorithm for detection and recovery of a deadlock status using the DDAPN(Deadlock Detection Avoidance Petri Net). Also, we apply the proposed algorithm has a feature to the FMS.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.860-863
• /
• 1994

Main sources of increased vibrations and air noise on ship are main and auxiliary engines and ship ducts. The various ways of transfer of vibration energy and air noise in passenger cabin of a vessel require, in general case, of various methods of attenuation. The transfer of vibration energy from engines through a support requires, alongside with shock-absorbers, availability active shock-absorbers. The transfer of vibration energy and hydrodynamic noise on ship ducts requires availability, alongside with flexible muffler, active mufflers. The availability of air noise from working equipment can require, along with absorbent covers, of space systems of active noise control. In the given article it is spoken about the unified approach to formation of the block-diagram of active noise and vibration control. The complex approach permits to receive additional efficiency in reduction of noise in passenger cabin of vessels.