• Structural Engineering and Mechanics
• /
• 제56권1호
• /
• pp.27-47
• /
• 2015

In this study, the accuracy and reliability of fully nonlinear method against equivalent linear method for dynamic analysis of soil-structure interaction is investigated comparing the predicted results of both numerical procedures with the results of experimental shaking table tests. An enhanced numerical soil-structure model has been developed which treats the behaviour of the soil and the structure with equal rigour. The soil-structural model comprises a 15 storey structural model resting on a soft soil inside a laminar soil container. The structural model was analysed under three different conditions: (i) fixed base model performing conventional time history dynamic analysis, (ii) flexible base model (considering full soil-structure interaction) conducting equivalent linear dynamic analysis, and (iii) flexible base model performing fully nonlinear dynamic analysis. The results of the above mentioned three cases in terms of lateral storey deflections and inter-storey drifts are determined and compared with the experimental results of shaking table tests. Comparing the experimental results with the numerical analysis predictions, it is noted that equivalent linear method of dynamic analysis underestimates the inelastic seismic response of mid-rise moment resisting building frames resting on soft soils in comparison to the fully nonlinear dynamic analysis method. Thus, inelastic design procedure, using equivalent linear method, cannot adequately guarantee the structural safety for mid-rise building frames resting on soft soils. However, results obtained from the fully nonlinear method of analysis fit the experimental results reasonably well. Therefore, this method is recommended to be used by practicing engineers.

• 대한조선학회논문집
• /
• 제37권1호
• /
• pp.99-110
• /
• 2000

파랑충격하중에 의한 선수 구조부의 손상은 주로 충격압력역적과 파랑충격하중이 가한 면적에 의하여 크게 영향을 받는다. 본 연구에서는 세 번째 단계로서 LS/DYNA3D를 이용하여 파랑충격하중에 대한 DWT 300,000급 VLCC의 선수 구조부의 동적 구조해석을 수행하여 검증을 하고자 한다. 극치 6.5MPa, 후부높이 1.0MPa, 지속시간 5.0msec인 파랑충격압력 곡선을 강성이 작은 보강재로 보강된 선수 구조부에는 면적 $1.5s{\times}1.5s$, 대체로 강성이 큰 스트링거 등의 부재로 보강된 경우는 면적 $2.5s{\times}2.5s$에 가한다. 이상의 동적 구조해석을 통하여 넓은 간격의 보강재가 부착된 선수 구조부에는 외판과 보강재에 큰 손상변형이 발생한 것 이외는 고려 중인 유조선의 선수 구조부는 본 연구의 파랑충격하중에 대하여 충분한 강도를 지닌다고 사료된다.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.39-46
• /
• 2013

Smart material such as SMA (Shape Memory Alloy) has been studied in various ways because it can perform continuous, flexible, and complex actuation in simple structure. Smart soft composite (SSC) was developed to achieve large deformation of smart material. In this paper, a shell actuator using woven type SSC was developed to enhance stiffness of the structure while keeping its deformation capacity. The fabricated actuator consisted of a flexible polymer and woven structure which contains SMA wires and glass fibers. The actuator showed various actuation motions by controlling a pattern of applied electricity because the SMA wires are embedded in the structure as fibers. To verify the actuation ability, we measured its maximum end-edge bending angle, twisting angle, and actuating force, which were $103^{\circ}$, $10^{\circ}$, and 0.15 N, respectively.

• 대한토목학회논문집
• /
• 제29권6A호
• /
• pp.641-650
• /
• 2009

파랑하중을 받는 콘크리트 부유식 구조물의 부재력 산정식을 제시하였다. 기존의 설계식은 구조물의 길이와 파장 길이가 일치할 때에 적용이 가능하다. 그러나 대부분의 경우 구조물의 길이와 파장 길이가 일치하지 않기 때문에 비평형부력에 의한 추가적인 모멘트가 발생한다. 따라서 본 연구에서는 부유구조물을 강체로 가정하고 비평형부력의 영향을 고려한 설계식을 제시하였다. 제안된 식의 타당성을 확인하기 위하여 강체거동하는 부유구조물에 대한 유한요소해석을 수행하여 이를 확인하였다. 그러나 초대형 부유구조물은 거대한 규모에 따른 유연성을 가지게 되므로 탄성거동하는 부유구조물에 대한 유한요소해석을 수행하여 강체거동에 근거한 설계식의 과대평가 양상을 파악하고자 하였다. 탄성변형을 고려하여 산정된 부재력은 강체거동으로 고려하여 산정된 부재력의 약 55%정도의 값으로 감소하는 것으로 나타났다.

• 한국공간구조학회논문집
• /
• 제13권3호
• /
• pp.65-72
• /
• 2013

Long span arch structure is composed of arch as relatively flexible structure and column as relatively rigid structure. In this study, the characteristic of dynamic response is analyzed according to the natural frequency ratio between arch and columns. The result of analysis for arch as relatively vertical vibration mode is dominant, the influence of columns mainly appears at relatively high frequency band according to increase of 1st mode frequency in column. However, the dynamic characteristic of arch structure is expected to vary with not only frequency ratio but interaction between vibration modes of arch and columns.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.312-318
• /
• 2001

This paper suggests the finite element method to analyze the dynamic characteristics of a rotating HDD system including the supporting structure with general shape. The flexible supporting structure was modeled by tetrahedra elements to produce a finite element model of disk-spindle-shaft-housing system and the dynamic characteristics of the HDD system was investigated due to the change of rotating speed. The validity of the presented method was verified by the modal testing. The supporting structure has an crucial effect on lower modes for HDD system, so that it is required to consider the supporting structure to accurately analyze the dynamic characteristics of HDD system.

• 한국자기공명학회논문지
• /
• 제2권1호
• /
• pp.41-49
• /
• 1998

A linear undecapeptide, Substance P (SP) is involved in a wide variety of physiological processes such as pain, inflammation, salivation, and hypertension. Tertiary structure of SP in dodecylphosphocholine (DPC) micelles has been investigated by CD, NMR spectroscopy, and DGII calculation. CD spectrum of SP in the presence of 7.5 mM DPC micelles does not show any favorable secondary structure. The tertiary structure determined by NMR spectroscopy and DGII calculation shows that the Phe7-Phr8-Gly9-Leu10 region adopts a turn structure, while the N-terminal region is quite flexible. Both prolines in SP exist preferentially as the trans isoforms and the aromatic ring of Phe7 protrudes outward. Conformation of SP may be restrained by the contact of the Phe7 aromatic ring with the hydrophobic side chains of the DPC micelles and this interaction induces a turn structure. Structure of SP in aqueous solution in the presence of DPC micelles can represent a good model to study the conformation recognized by the receptor near neutral membrane.

• 전자공학회논문지B
• /
• 제29B권7호
• /
• pp.1-10
• /
• 1992

This paper gives on overview of register windowing structure and presents advantages and limitations. Based on these advantages and disadvantages, an original approach for the design of large register file is presented, analyzed and compared with existing approaches. The advantages and disadvantages of this new approach to register file design are discussed, and conditions under which it works better than the existing approaches are outlined. Design tradeoffs are examined in an analytic and empirical study, and the results of which are summarized in the conclusion of this paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.127-132
• /
• 2003

Through advance in construction techniques, engineering progress, availability of new materials, and economic considerations, buildings are becoming taller, lighter, and more flexible. In addition, today/s buildings are largely of regular geometric shape with smooth glass metal exteriors, which increase the likelihood of vortex shedding. The wind induced oscillation of the building, if not properly damped, could cause occupant discomfort and other problem. This paper will deal with residual building structure equipped with viscoelastic dampers. And the dampers are installed on the 42th story according to the maximum relative deformation.

• Architectural research
• /
• 제3권1호
• /
• pp.45-52
• /
• 2001

In this paper, a pressurized single vertical arch and a pressurized leaning arch composed of flexible fabric material are considered. These arches have also been considered as a possible support structure for the tent-like structures. Two different boundary conditions are considered in leaning arches with fixed bases and pinned bases. The behaviors of the leaning arches are investigated for two tilt angles as 15, 30. For each angle, two loading conditions are considered as uniformly distributed load and wind loads. The F.E.M. is used through the all analysis procedures. For the results, load-deflection relationships, buckling modes, differences between two boundary conditions and deformed configurations are discussed.