• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.257-264
• /
• 2019

Recently, ITU-T recommends that FlexE, which allows the flexible configuration of Ethernet signals, be received by OTN for transparent transmission through OTN. To compensate for the difference in bit rate that can occur when mapping FlexE signals to OTN payload, an idle codeword is removed or inserted. However, the detailed functional blocks required to implement this method are not yet available. In this paper, based on the recent ITU-T requirements, a detailed functional block for OTN mapping of FlexE signals is proposed based on 400G class. In addition, based on the detailed functional blocks, mathematical analysis was performed to obtain the characteristics of removing and inserting idle code words, and the simulation results are shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.883-891
• /
• 2009

This paper proposes Ethernet linear protection switching technology in order to provide the SONET/SDH-like resiliency over Metro Ethernet Networks. The proposed design is made of an architecture with a control processor board and several data processing boards, where the control processor board is independent of data processing board, providing a flexible solution for carrier Ethernet system. However, it leads an increasing message delay between inter-processors. In this paper, we implement and confirm a restoration of failed transport connections withing 50 millisecond in spite of increasing message delay between the control processing board and data processing board providing carrier-class network survivability.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.633-636
• /
• 2003

An Ethernet passive optical network(EPON) is a point-to-multipoint optical network. EPONs leverage the low cost, high performance curve of Ethernet systems to provide reliable data, voice and video to end user at bandwidths far exceeding current access technologies. In this paper, we propose the economical and flexible structure of optical network unit(ONU) converting optical format traffic to the customer's desired format(Ethernet, VDSL, T1, IP multicast, etc.). A unique feature of EPONs is that in addition to terminating and converting the optical signal the ONU provide Layer 2-3 switching functionality, which allows internal routing of enterprise traffic at the ONU.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1235-1239
• /
• 2003

On the base of network frame and protocol system of Ethernet the networked sensing technology based on Ethernet is studied and the design principles of industrial Ethernet measurement of control system is put forward, and the general structure model is built in the paper. An eight-bit economical MCU scheme is proposed, and a general scheme of distributed intelligent networked measuring and control equipment based on TCP/IP is designed too. A compact TCP/IP protocol stack are successfully implemented in eight-bit MCU. With C51 program language, method of modularized programming is applied in soft design. The problem of in-system modifying measuring and control strategy of its system is solved successfully by assigning memory dynamically and saving parameter with EEPROM, and it makes the intelligent networked measurement and control system can explain and analyses control strategy from PC. Experiment result shows that, the research of intelligent networked measurement and control equipment and system base on TCP/IP is successful, with flexible network, convenient usage, and good commonality.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.9
• /
• pp.684-690
• /
• 2006

This paper proposes a message transmission model for hard real-time communications of periodic messages on a switched Ethernet and also proposes an algorithm to schedule the messages to be transmitted within their deadlines. The proposed scheduling algorithm is a distributed one and is peformed by the source and the destination nodes without the modification of the operational features of the standard Ethernet switch. When a new periodic message needs to be transmitted, it is first checked whether it can be scheduled on both the transmission and the reception links without affecting the already-scheduled messages, and a feasible schedule is made for the new message if it is schedulable. The proposed scheduling algorithm guarantees the transmission of periodic messages within their deadline and allows flexible message transmission on a hard real-time switched Ethernet through the dynamic addition of new periodic messages during run-time.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.59-65
• /
• 2015

To build a flexible network than traditional transport network, the carrier ethernet technology is emerging in network industry recently and MPLS-TP technologies are being applied as a major standard technology for the carrier ethernet. However, network management technologies required to handle equipment installed in MPLS-TP network are not clear. This paper propose an efficient method to build a management network automatically without any additional configuration when network equipments are installed in MPLS-TP network. The proposed scheme reduce cost required for both equipment installation and network maintenance by minimizing configuration procedures of connecting management system with network. We evaluated the effectiveness of the proposed scheme by applying the scheme to a real MPLS-TP equipment.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.255-257
• /
• 2006

This paper proposed a platform which includes both Network processor and DSP for flexible IED. The Network processor is one of the Intel's IXP4XX Product Line family and the DSP is one of the TI's C6000 family. An embedded Linux is ported in Network processor so that a DSP program can be downloaded to Network processor through ethernet and then downloaded to DSP. Using this method, various algorithms according to IED can be applied to the Network processor board. Maximum ten ADCs can be connected because there is a CPLD between DSP and ADC. That is, the network processor board which can measure maximum 40 channels is implemented. In DSP program, thread and double buffering methods are used not to miss voltage samples. The Network processor board is verified using a method that eight channel voltage signals converted to digital are transmitted to server through both DSP and IXP425.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.913-914
• /
• 2006

This paper proposes a flexible IED platform which is implemented with a network processor and a DSP. DSP algorithms are downloaded through the embedded Linux based network processor remotely from ethernet. This architecture gives the best flexibility to adaptively accommodate the various algorithms needed in the IED environment. The developed IED platform can simultaneously measure data of the maximum of forty channels. The developed IED platform shows the successful operation, which measures and transfers the 8 channels data of 16bit samples sampled at 3.84kHz per each channel. The detailed performance analysis of the developed IED platform shows the about 10% processing load of CPU running at 533MHz.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.55-62
• /
• 2016

In this paper, we propose a hybrid multi.system-on-chip (H-MSoC) architecture that provides a high-flexibility system in a rapid development time. The H-MSoC approach provides a flexible system-on-chip (SoC) architecture that is easy to configure for physical- and application-layer development. The physical- and application-layer aspects are dynamically designed and modified; hence, it is important to consider a design methodology that supports rapid SoC development. Physical layer development refers to intellectual property cores or other modular hardware (HW) development, while application layer development refers to user interface or application software (SW) development. H-MSoC is built from multi-SoC architectures in which each SoC is localized and specified based on its development focus, either physical or application (hybrid). Physical HW development SoC is referred to as physical-SoC (Phy-SoC) and application SW development SoC is referred to as application-SoC (App-SoC). Phy-SoC and App-SoC are connected to each other via Ethernet. Ethernet was chosen because of its flexibility, high speed, and easy configuration. For prototyping, we used a LEON3 SoC as the Phy-SoC and a ZYNQ-7000 SoC as the App-SoC. The proposed design was proven in real-time tests and achieved good performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.