• 제목/요약/키워드: Flexible Disk

검색결과 114건 처리시간 0.026초

FE모델을 사용하여 램프상의 로드-언로드 동적특성에 대한 해석 (Analysis of Dynamic Characteristics on the L/UL Ramp Using Advanced FE Model)

  • 정문교;박경수;박노철;양현석;박영필
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.413-418
    • /
    • 2004
  • Recently, the development of mobile devices demands information storage systems to use micro drive devices. 1-inch micro drive hard disk uses the load/unload(L/UL) technology to increase area recording density and reduce power consumption. Because micro drive has light actuator, effects of the flexible cable that is ignored in 3.5-inch hard disk drive is important to load/unload performances. In this paper, effects of flexible cable on load/unload performances are studied.

  • PDF

정보저장기기용 회전디스크의 임계속도 및 플러터 속도에 관한 연구 (Critical and Flutter Speeds of Rotating Disks in Information Storage Devices)

  • 이승엽;윤동화
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 춘계학술대회논문집
    • /
    • pp.484-489
    • /
    • 2001
  • Recent trends in information storage devices disk are the transition from CD drives to high density DVD drives, the development of writable disk drives and the appearance of several high-density portable disk drives. In some flexible disk drives, self-excited disk vibrations become severe as rotation speed increases near or above critical speed. Critical speeds of CD/DVD, ASMO and floppy disks are experimentally measured and compared with analytical predictions. Flutter instability caused by aero-induced disk vibration at high speeds are experimentally observed. In ASMO, three nodal-diameter mode experiences its flutter at 8750 rpm with the frequency lock-on phenomenon. The CD/DVD disk does not have the aero-induce flutter up to 14,000 rpm.

  • PDF

회전축 정렬불량을 고려한 유연회전디스크의 진동해석 (Vibration Analysis of a Flexible Spinning Disk Considering the effect of Misalignment)

  • 정진태;허진욱;최기영
    • 대한기계학회논문집A
    • /
    • 제26권5호
    • /
    • pp.952-959
    • /
    • 2002
  • The natural frequencies of a flexible spinning disk misaligned with the axis of rotation are studied in an analytic manner. The effects of misalignment on the natural frequency need to be investigated, because the misalignment between the axis of symmetry and the axis of relation cannot be avoided in the removable disks such as CD-R, CD-RW or DVD disks. Assuming that the in -plane displacements are in steady state and the out-of-plane displacement is in dynamic state, the equations of motion are derived for the misaligned spinning disk. After the exact solutions are obtained fur the steady -state in-plane displacements, they are plugged into the equation for the dynamic-state out-of-plane motion. The resultant equation is a linear equation for the out -of-plane displacement, which is discretized by the Galerkin method. Based on the discretized dquations, the effects of the misalignment are analyzed on the vibration characteristics of the spinning disk, i.e., the natural frequencies and the critical speed.

An investigation into the mechanics of fiber reinforced composite disk springs

  • Yang, Peng;Van Dyke, Stacy;Elhajjar, Rani F.
    • Steel and Composite Structures
    • /
    • 제18권3호
    • /
    • pp.775-791
    • /
    • 2015
  • An analytical and experimental investigation is performed into the mechanical behavior of carbon-fiber/epoxy woven coned annular disk springs. An analytical approach is presented for predicting the deformation behavior of disk springs of specially orthotropic laminates with arbitrary geometric parameters. In addition, an analytical methodology is proposed for obtaining the deformation behavior of a stack of disk springs. The methodology is capable of accounting for parallel and series arrangements for uniform and irregular stacks. Element and assembly experimental results are used to validate the proposed method showing how to achieve flexible spring rates at various deflections ranges. This manuscript also provides guidelines for design and validation of disk spring assemblies.

가동 자석형 광 픽업 엑추에이터 개발 (Design of Moving Magnet Type Optical Pickup Actuator)

  • 김상룡;김윤기;송명규;우정현;박노철;유정훈;박영필
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.848-851
    • /
    • 2007
  • Recently, as the demand of the information storage devices with large storage capacity such as BD(Blu-ray Disk) and HDTV(high-definition television) is increased, the optical storage devices are also required to have fast data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disk drive should have high flexible mode frequencies for system stability. In this paper, we suggested a moving magnet type actuator having high flexible mode frequency. However, the moving magnet type actuator does not have sufficient driving sensitivities due to the weight of its moving part. To improve driving sensitivities, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, driving sensitivities and flexible mode frequencies were improved by using DOE(Design of Experiments) for magnetic circuit and modifying the lens holder. Consequently, it is confirmed that the designed model is satisfied with the desired specifications.

  • PDF

몰수된 원형 유연막에 의한 파랑변형 (Wave Deformation by Submerged Flexible Circular Disk)

  • 조일형;김무현
    • 한국해안해양공학회지
    • /
    • 제12권3호
    • /
    • pp.116-129
    • /
    • 2000
  • 자유수면 아래 일정한 초기장력이 작용한 원형 박막이 수평으로 놓여있을 때 3차원 선형 유탄성 이론을 적용하여 파와 구조물의 상호작용문제를 고찰하였다. 속도포텐셜을 회절포텐셜과 방사포텐셜로 분리하여 각각의 경계치 문제를 푼다. 유체영열을 3개의 영역으로 나누어 각 영역에서 회절포텐셜과 방사포텐셜을 Bessel 함수의 전개식으로 표현하고 부족한 경계조건으로 생기는 미지수는 인접한 영역이 만나는 정합면에서 속도와 압력이 같다는 정합조건식을 적용하여 구해진다. 원형막의 크기와 잠긴 깊이 그리고 추기장력이 변함에 따라 원형 유연막 주위의 파의 형태가 달라짐을 볼 수 있었다. 즉, 적절히 설계된 몰수형 원형 유연막은 파 에너지를 집중시키는데 활용될 수 있다.

  • PDF

비선형성을 고려한 각가속도를 갖는 유연 회전원판의 동적 해석 (Dynamic Analysis of a Flexible Spinning Disk with Angular Acceleration Considering Nonlinearity)

  • 정진태;정두한
    • 소음진동
    • /
    • 제9권4호
    • /
    • pp.806-812
    • /
    • 1999
  • Dynamic behaviors are analyzed for a flexble spinning disk with angular acceleration, considering geometric nonlinearity. Based upon the Kirchhoff plate theory and the von Karman strain theory, the nonlinear governing equations are derived which are coupled equations with the in-plane and out-of-planedisplacements. The governing equations are discretized by using the Galerkin approximation. With the discretized nonlinear equations, the time responses are computed by using the generalized-$\alpha$ method and the Newton-Raphson method. The analysis shows that the existence of angular acceleration increases the displacements of the spinning disk and makes the disk unstable.

  • PDF

한국형 틸팅열차용 Flexible 소결 브레이크 패드 적용 연구 (Application of Flexible Sintered Brake Pad for TTX)

  • 구성모;이동균;고태환;나종태;김상호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.597-603
    • /
    • 2010
  • Metallic sintered brake pads are often applied to Mid/High Speed Train due to its high strength and thermal characteristics. Because of its imbalance contact between discs and pads can greatly influence the life span, one sided wear, discs attack/crack and threat the safety of the train during operation. In this research, we analyzed pressure/temperature distribution between brake pads and disks. Analyzed data had been verified and modified to conduct further tests of Flexible brake pads with small/full-scale dynamo test. Flexible brake pads were installed to TTX train to conduct further tests to identify the differences between Rigid brake pads and Flexible brake pads. In result, Flexible brake pads showed outstanding disk thermal stability, one sided wear, noise and life of pad than rigid brake pad.

  • PDF

고속철도 디스크 브레이크의 유연 패드 개발에 대한 연구 (Study on Development of Flexible Pad for High Speed Train Disk Brake)

  • 이민규;김주용;김재민;양영민;김상호;조종두
    • 한국철도학회논문집
    • /
    • 제14권2호
    • /
    • pp.100-108
    • /
    • 2011
  • 본 논문은 고속철도 디스크 브레이크용 유연 제동 패드의 성능 향상을 위해 구조적 안정성 검토와 신뢰성에 대한 연구를 수행하였다. 연구에서는 유연패드의 구조 해석 과정을 거쳐 개선된 모델을 얻어내었으며, 실제 크기와 동일한 1/2 모델을 가지고 구조적 안전성을 확인하였다. 또한, 축소 시편을 제작하여 모달 시험과 스트로크 및 내구성 시험을 수행하여 동 특성과 기계적 안정성을 확인하였다. 샤시 다이나모 장비와 열 적외선 캠코더를 이용하여 유연패드에 대하여 회전 속도에 따른 열섬 발생 현상을 측정하고, 디스크와 패드 사이의 균일한 접촉 능력을 확인하였다. 또한, 제동 시 유연패드에 안정적인 온도 분포가 이루어지는 것을 확인할 수 있었다. 이와 같은 결과를 토대로 제안된 유연패드의 구조 안정성 및 열에너지 방출 효과 등의 장점을 확인하였다.