• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.130-133
• /
• 2007

In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.

• Mass Spectrometry Letters
• /
• v.5 no.4
• /
• pp.110-114
• /
• 2014

The method of direct mass spectrometry profiling is reliable and reproducible for the rapid identification of clinical isolates of bacteria and fungi. This is the first study evaluating the approach of MALDI-TOF mass spectrometry profiling for rapid identification of carbapenemase-resistant enterobacteriaceae (CRE). Proof of concept was achieved by the discrimination of CRE using MALDI Biotyper MS based on the protein. This profiling appears promising by the visual observation of consistent unique peaks, albeit low intensity, that could be picked up from the mean spectra (MSP) method. The Biotyper MSP creation and identification methods needed to be optimized to provide significantly improved differences in scores to allow for subspecies identification with and without carbapenemases. These spectra were subjected to visual peak picking and in all cases; there were pertinent differences in the presence or absence of potential biomarker peaks to differentiate isolates. We also evaluated this method for potential discrimination between different carbapenemases bacteria, utilizing the same strategy. Based on our data and pending further investigation in other CREs, MALDI-TOF MS has potential as a diagnostic tool for the rapid identification of even closely related carbapenemases but would require a paradigm shift in which Biotyper suppliers enable more flexible software control of mass spectral profiling methods.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.1
• /
• pp.3702-3711
• /
• 1975

This study was originated to investigate the imparired parts of the mist and dust blowers and intended to analyze the causes of their failures by the use of the Weibull probability paper. By the use of the paper, the parts which were needed to change the design, the force of the urgency, the mean time between failures of the parts and the basic causes of the troubles could be predicted. The survey showed that the following parts got out of order: (A) flexible rubber hose, (B) blowing fan, (C) lead valve, (D) piston ring. (E) crank main bearing, (F) coil in magneto and (G) needle valve in carburettor. The analysis of the survey indicated that the parts G, C, E and D were belonged to "wear-out failure", and that the mean time between failures became shorter in order as indicated above. To insure longer lives of those parts, it would be necessary to change the design and the material and to upgrade operators mechanical technique of the mist and dust blower. The failure of the parts A, B and F was classified as "randomfailure", and they did not seem to be the "wear-out" at that time. The parts B and F was evaluated as "initial failure". Quality controls and operating tests by the producer. and the operational training for users should be strengthened so as to eliminate these failures. Were the failures only in the parts A, C, D, E, F and G, it could be said that the "reliability" of the mist and dust blower would fall to 10 percent in the second year, and 50 percent of the mist and dust blowers would fail in all parts A, C, D, E, F and G before the blower would have control insect and disease in 58.2 hectares. The use of the Weibull probability paper for analyzing failures of the mist and dust blowers was effective in that it analyzed failure in the relationship between strength of the parts and users actual circumstanoes.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.149-158
• /
• 2014

The effects of spot cooling on growing ever-bearing strawberry in hydroponic cultivation during summer by spot cooling system was estimated in plastic greenhouse located in Pyeongchang. The temperature of cooling water was controlled by heat pump and maintained at the range of $15{\sim}20^{\circ}C$. Cooling pipes were installed in root zone and very close to crown. Spot cooling effect was estimated by applying system in three cases which were cooling root zone, crown plus root zone, and crown only. White low density polyethylene pipe in nominal diameter of 16 mm was installed on crown spot, and Stainless steel flexible pipe in nominal diameter of 15A was installed in root zone. Crown and root zone cooling water circulation was continuously performed at flowrates of 300 ~ 600 L/hr all day long. Strawberry yields by test beds were surveyed from Aug. 1 to Sep. 30. The accumulated yield growth rate compared with a control bed of crown cooling bed was 25 % and that of crown plus root zone cooling bed was 25 % and that of root zone cooling bed was 20 %. The temperatures of root spot in root zone cooling was maintained at $18{\sim}23.0^{\circ}C$ and that of crown spot in crown cooling was maintained at $19{\sim}24^{\circ}C$. Also, the temperatures of root spot in crown plus root zone cooling bed was maintained at $17.0{\sim}22.0^{\circ}C$ and that of crown spot was maintained at $19{\sim}25^{\circ}C$.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.440-448
• /
• 1999

본 논문은 객체지향형 분산처리 환경 하에서 오디오나 비디오 등과 같은 실시간(real-time) 스트림(stream) 데이타를 처리하는 데 필요한 소프트웨어 기반구조를 설계하고 구현한 내용을 기술한다. 본 논문에서 제시한 DAViS(Distributed Object Framework supporting Audio/Video Streaming)는, 오디오/비디오 데이타의 처리와 관련된 여러 소프트웨어 구성요소들을 분산객체로 추상화하고, 그 객체들간의 제어정보 교환경로와 오디오/비디오 데이타 전송경로를 서로 분리하여 처리한다. 분산응용프로그램 작성자는 DAViS에서 제공하는 서비스들을 이용하여, 기존의 분산프로그래밍 환경이 제공하는 것과 동일한 수준에서 오디오/비디오 데이타에 대한 처리를 표현할 수 있다. DAViS는, 새로운 형식의 오디오/비디오 데이타를 처리하는 부분을 손쉽게 통합하고, 하부 네트워크의 전송기술이나 컴퓨터시스템 관련 기술의 진보를 신속하고 자연스럽게 수용할 수 있도록 하는 유연한 구조를 가지고 있다. Abstract This paper describes the design and implementation of software framework which supports the processing of real-time stream data like audio and video in distributed object-oriented computing environment. DAViS(Distributed Object Framework supporting Audio/Video Streaming), proposed in this paper, abstracts software components concerning the processing of audio/video data as distributed objects and separates the transmission path of data between them from that of control information. Based on DAViS, distributed applications can be written in the same abstract level as is provided by the existing distributed environment in handling audio/video data. DAViS has a flexible internal structure enough to easily incorporate new types of audio/video data and to rapidly accommodate the progress of underlying network and computer system technology with very little modifications.

• KSBB Journal
• /
• v.17 no.4
• /
• pp.326-332
• /
• 2002

The quality of biopharmaceutical proteins is strongly affected by a manufacturing process employed to produce Et, and thus validation of the manufacturing bioprocess is a very important issue. Chromatography is probably the most widely used bioprocess unit operation for protein purification. In this study, a miniaturized automatic chromatography system was designed and constructed for scale-down studies for process chromatography validation. This system, named MiniValChrom, has the following features: automatic and repeated operation, flexible sequences and intervals among the steps, on-line and real-time monitoring and control, method files savings, etc. Using the MiniValChrom, we peformed a case study of an abbreviated experiment to estimate chromatographic resin lifetime. BSA (bovine serum albumin) and Cibacron Blue 3G-A were used as the model protein and the resin, respectively. The resin deterioration was evaluated by determining and monitoring the HETP and NTP values from the chromatograms every 5 cycles. It was observed that the HETP and the NTP values were changed by 9% after 15 cycles. The resin lifetime validation could be completed by repeating this experiment until the HETP value reached a predetermined value. The MiniValChrom's concept and the protocol suggested in this study can serve as a rapid and economical tool for the validation studies of bioprocess chromatography system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.29-38
• /
• 1985

In this paper we have designed and implemented in real time a simple, efficient and flexible AOPCM cosec using a high speed digital processor, NEC 7720. For ADPCM system, we have used an instantaneous adaptive quantizer and a first-order fixed predictor. The software for NEC 7720 has been developed and it was found that the NEC 7720 was capable of performing the entire ADPCAt algorithm for 4 channels in real time as optimizing the program. Computer simulation has born made to investigate a computational accuracr of NEC 7720 and to de-termine necessary parameters for a ADPCM codec. Real telephone speech, RC-shaped Gaussian noise and 1004 Hz tone signal were used for simulation. In simulation, the parameters werc optimized from the computed SNR and the informal listening test. The developed software was tested in real time operation using a hardware emulator for NEC 7720. It took a maximum 23.25$\mu$s to encode one sample and 113.5$\mu$s, including all the necessary 1/0 operations, to encode 4 channels. In the case of decoding process, it took 24.75$\mu$s to decode one sample and 119.5$\mu$s to decode 4 channels.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.211-235
• /
• 2004

Component based design is perceived as a key technology for developing advanced real-time systems in a both cost- and time effective manner. Already today, component based design is seen to increase software productivity, by reducing the amount of effort needed to update and maintain systems, by packaging solutions for re-use, and easing distribution. Nowdays, a thousand and one companies in If(Information Technology) industry such as Sl(System Integration) and software development companies, regardless of scale of their projects, has spent their time and endeavor on developing reusable business logic. The component software is the outcome of software developers effort on overcoming this problem; the component software is the way propositioned for quick and easy implementation of software. In addition, there has been lots of investment on researching and developing the software development methodology and leading If companies has released new standard technologies to help with component development. For instance, COM(Component Object Model) and DCOM(Distribute COM) technology of Microsoft and EJB(Enterprise Java Beans) technology of Sun Microsystems has turned up. Component-Based Development (CBD) has not redeemed its promises of reuse and flexibility. Reuse is inhibited due to problems such as component retrieval, architectural mismatch, and application specificness. Component-based systems are flexible in the sense that components can be replaced and fine-tuned, but only under the assumption that the software architecture remains stable during the system's lifetime. In this paper, It suggest that systems composed of components should be generated from functional and nonfunctional requirements rather than being composed out of existing or newly developed components. about implements and accomplishes the modeling for the Product Control component development by applying CCD(Contract-Collaboration Diagram), one of component development methodology, to MRP(Material Requirement Planning) System

• Nuclear Engineering and Technology
• /
• v.27 no.1
• /
• pp.53-66
• /
• 1995

Since the current licensed system codes for Non-LOCA safety analysis are applicable only for a specific type PWR, it is necessary to develope a new system analysis code applicable for all apes of PWRs. As a R&D program, KAERI is developing TASS code as an interactive and faster-than-real-time code for the NSSS transient simulation of both CE and Westinghouse plane. It is flexible tool for PWR analysis which gives the user complete control over the simulation through convenient input and output options. In this paper the code applicability to Westinghouse ape plants was verified by comparing the TASS prediction to plant data of loss of AC power and loss of load transients, and comparing to the prediction of RELAP5/MOD3 for feedline break, locked rotor, steam generator tube rupture and steam line break accidents.

• Korean Journal of Psychosomatic Medicine
• /
• v.5 no.1
• /
• pp.43-51
• /
• 1997

This study was conducted to identify the relationships between personality disorders/traits and somatoform disorders. After the patients were screened through self-rated SCID-II Questionnaire(Structured Clinical Interview for DSM-III-R, Questionnaire), the researcher got psychiatric history, performed clinician-rated SCID-P(Structured Clinical Interview for DSM-III-R, Patient Edition), classified and diagnosed mental disorders with SCID-P, and evaluated SCID-II(Structured Clinical Interview for DSM-III-R, Personality Disorders) by direct interview. The prevalencies of avoidant, obsessive-compulsive, schizotypal, narcissistic, paranoid, dependent, self-defeating, borderline personality disorders/traits in patients with somatoform disorders were diagnosed as 67.4%, 48.8%, 44.2%, 41.9%, 37.2%, 34.9%, 34.9%, 32.6%, respectively. The frequencies of self-defeating and schizotypal PD/traits were significantly higher than those of other neurotic control group. The results of this study could be regarded as replicating the results of previous studies that had reported most of all patients with somatoform disorder had presented with personality disorders/traits. This study, however, showed that the patients with somatoform disorders accompanied not with any specific types of personality disorders/traits but with various types of personality disorders/traits, which was much different from the previous usual clinical impressions. Thus, it is necessary for clinicians to approach the patients with somatoform disorders through more flexible and more supportive methods and attitude, in order that they should treat them more effectively.