• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.2 s.233
• /
• pp.270-276
• /
• 2005

This paper develops the flexible computational model of a heavy truck by interfacing the frame modeled as a flexible body to the heavy truck's computational model composed of rigid bodies. The frame is modeled by the finite element method. Three torsional modes and three bending modes of the frame are considered for the interface of the heavy truck's computational model. The actual vehicle test is conducted off road with a velocity of 20km/h. The vertical accelerations at the cab and front axle are measured in the test. For the verification of the developed computational model, the measured vertical acceleration profiles are compared with the simulation results of the heavy truck's flexible computational model. E grade irregular road profile of ISO is used as an excitation input in the simulation. The verified flexible computational model is used to compare the vibration characteristics of a front suspension system having a multi-leaf spring and that having a tapered leaf spring. The comparison results show that the front suspension having a tapered leaf spring has a higher vertical acceleration at the front axle but a lower vertical acceleration at the cab than the suspension system having a multi-leaf spring.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.3
• /
• pp.307-312
• /
• 2010

In this study, advanced computational technique for mechatronic analysis has been developed for the efficient design and test of typical machine tool models. Flexible multi-body dynamic (FMBD) analysis method combined with motion controller including control logics is used to simulate typical operation conditions. The present FMBD machine tool model is composed of flexible column structure, rigid body spindle, vertical motion guide (arm) and screw elements. Driving motor clement with rotating degree-of-freedom is interconnected and governed by the designed Matlab Simulink control logic, and then the position of the spindle is feedback into the control logic. It is practically shown from the results that the investigation of designed machine tools with controller can be effectively conducted and verified.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.450-456
• /
• 1988

Dynamic analysis of a vehicle is carried out with rigid body and flexible body models. The chassis of the vehicle is treated as flexible body in the flexible body model, and vibration normal modes are considered to account for elastic deformation of the component. Using output from the modal analysis in the finite element program, input data for the dynamic analysis with flexible body is generated. To achieve the computational efficiency, SUPERELEMENT technique is used for the vehicle suspension subsisted. The computer simulation time with suspension superelement was much reduced due to the reduction of coordinates and no kinematic constraint in the system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.489-494
• /
• 2001

This paper deals with a dynamic modeling of artillery system loaded by gun charge explosion during firing condition. Geometric and elastic gun data are used to modify a projectile interaction model. The maximum impact force on gun barrel was 15,000 N and the gun barrel moved about 1.3 m. A cannon bal] was presented to travel in the flexible gun, the traveling distance was about 23,000 m, and the angular velocity was about 10rad/sec. The artillery dynamic system using the multi-body dynamics enables us to obtain the data for the fatigue analysis.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.390-395
• /
• 2003

Moving flexible structures such as transfer systems in press machine, crane, working table of machine tools have vibration problems because of starting, feeding and stopping. An analysis method is suggested and experimentally studied in order to solve a vibration problem of a moving flexible structure. In this method, the concepts of substructure synthesis method and semi-static displacement including rigid body mode were used. Total deformation of a structure was assumed to be composed of quasi-static and dynamic components. Experimental results from an elementary model of a transfer feeder showed good agreements with computational results.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.66-69
• /
• 2006

In the present study, we propose a virtual boundary method for simulation of massive inextensible flexible strings immersed in viscous fluid flow. The fluid motion is governed by the Navier-Stokes equations and a momentum forcing is added in order to bring the fluid to move at the same velocity with the immersed surface. A massive inextensible flexible string model is described by another set of equations with an additional momentum forcing which is a result of the fluid viscosity and the pressure difference across the string. The momentum forcing is calculated by a feedback loop. Simulations of several numerical examples are carried out, inlcuding a hanging string which starts moving under gravity without ambient fluid, a string swimming within a uniform flow and a uniform flow over two side-by side strings. The numerical results agree well with the theoretical analysis and previous experimental observations. Preliminary results of a swimming elongated fishlike body will also be presented.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.237-245
• /
• 2008

We developed a computational method on coupled dynamics of tracked vehicle on seafloor and long flexible pipe. The tracked vehicle is modeled as rigid-body vehicle, and the linked flexible pipe is discretized according to a lumped-parameter model. The equations of motion of the rigid-body vehicle on the soft seafloor are combined with the governing equations of flexible pipe dynamics. Four Euler parameters method is used to express the orientations of the vehicle and the flexible pipe. In order to solve the nonlinear coupled dynamics of vehicle and flexible pipe an incremental-iterative formulation is implemented. For the time-domain integration $Newmark-\beta$ method is adopted. The total Jacobean matrix has been derived based on the incremental-iterative formulation. The interactions between the dynamics of flexible pipe and the mobility of the tracked vehicle on soft seafloor are investigated through numerical simulations in time domain.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.379-384
• /
• 2014

This article describes the dynamic behaviors of a rubber tired gantry crane(RTGC) under typical load conditions which are used in the design of gantry cranes. In order to investigate the dynamic characteristics of an RTGC, we developed a finite element crane model for its huge structure. The finite element model was validated with the modal test results, e.g., natural frequencies and normal modes. And other components of RTGC were converted into detailed 3D CAD models and finally transformed to rigid body models in a dynamic simulation program ADAMS. The load conditions considered in this paper were a normal operating condition(OP1) and container hanging condition with no external loads. As a result, we could find there was large influence of crane's vibration owing to its structural stiffness and deformation. And the vibration of crane could made the movements of RTGC, which occurs crash or malfunction of crane works.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1503-1509
• /
• 1994

An analysis method is suggested and experimentally studied in order to solve a vibration problem of a flexible structure while it is moving. In this method, substructure synthesis method, modal analysis method and Newmark's integral method were used. Total deformation of a structure was composed of quasistatic component and dynamic component. Rigid body modes were considered in calculation of dynamic component. Combining those two component, deformation behavior and a real structural model of a transfer feeder showed good agreements with computational results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.147-150
• /
• 2005

The torsion beam axle type is widely used in the rear suspension for small passenger car because of low cost, good performance and etc. The FE and dynamic analysis using the computer are very helpful for the efficiency of the torsion beam design. First of all, the reliability on the computational model must be verified for the analysis. In this study, The FE model of the torsion beam was verified according to comparison with he test data. And after making the flexible body using the FE model, the dynamic characteristic of the tubular type torsion beam axles was compared with that of the V-beam type.