• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.124-137
• /
• 2010

This study was started with the objective of restoring abandoned embanked farms, which are recently increasing, to mud flat by putting in least amount of energy in the aspect of environmental restoration. For the direction and establishment of the proposal for the restoration of mud flat using embanked farms, a case of Maipo Wetland in Hongkong was analyzed, and a proposal was prepared considering the condition of mud flat in Gochang. The restoration of mud flat in Gochang is intended to create various wetland ecological spaces as well as to provide opportunities for experience, education, recreation, and tourism. Effort was made to development an environment closest to the local ecological environment considering the shape and topographical condition of existing abandoned farms. For construction of the habitat, a target species was chosen and the plan for selection, planting, and management of species of trees suitable for the target species was established. In addition, the water level will be controlled by water gates to conform to the resting, spawning, breeding, and migration period considering the behavioral pattern of waders, the target species. The research on the restoration of mud flat in Korea is in incipient stage and this study provided an opportunity to review the possibility of restoration of abandoned embanked farms to mud flat. For the success of mud flat restoration from a long-term perspective, development of acclimating design infrastructure, technology improvement for mud flat restoration, and basis of partnership for the maintenance should be prepared in a systematical way.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.257-266
• /
• 2019

In this study, we selected 6 vegetation sites (reed community) and 6 non-vegetation sites (tidal flat) in the Muan tidal flat of Hampyeong Bay, and observed seasonal changes in carbon dioxide concentration, flux and soil temperature at low tide conditions. The study was conducted to identify the characteristics of seasonal changes in vegetation and non-vegetation areas through the data observed in May 30, August 8, 2012 and January 31, 2013. The average carbon dioxide concentration in the vegetation area was the highest in winter, followed by spring and summer, and the non-vegetation area showed the same concentration change as the vegetation area. The carbon dioxide flux in the vegetation area showed a positive (+) value in both spring and summer, but it was negative (-) in the winter. The average value of carbon dioxide flux was the highest in spring, but it was almost similar to summer, and winter was the lowest negative value. Non-vegetation areas showed positive emission in spring, and negative uptake in summer and winter; mean values were the highest in spring, and the difference between summer and winter was small. In summary of seasonal change characteristics of the research area, the emission of carbon dioxide was dominant in both areas in spring. In summer, carbon dioxide emission was dominant in the vegetation area, and the non-vegetation area was observed to uptake by photosynthesis of phytoplankton, but it was very small. In winter, changes in flux in both areas were very slight.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• Korean Journal of Environment and Ecology
• /
• v.31 no.6
• /
• pp.492-499
• /
• 2017

This study analyzed 96 individuals in 6 populations using ISSR marker to investigate the genetic diversity of Salicornia herbacea populations. The total of 49 PCR amplification bands was observed in 6 ISSR primers, and 30 of them had genetic polymorphisms. The Shannon's information index (I) and gene diversity index (h), which indicate the genetic diversity of the Salicornia herbacea populations, were 0.382 and 0.249, respectively. The genetic diversity according to the population size was lowest with 0.092 (I) and 0.058 (h) in $0.1m{\times}0.1m$ and highest with 0.338 (I) and 0.227 (h) in $25m{\times}25m$, which was suitable for the furtherance of the high population with high genetic diversity. The UPGMA dendrogram based on Nei's genetic distance did not show a significant correlation with the distance between the Salicornia herbacea population. The results indicate that the Salicornia herbacea habiting in the restricted environment should have an area over a certain size to ensure the formation of a population with genetic diversity.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.121-132
• /
• 2005

To classify the surface sedimentary facies using IKONOS image collected over Hwangdo tidal flat in Cheonsu Bay, the optical reflectance was compared for characterizing various sedimentary environments such as grain size, tidal channel pattern and area ratio of surface remnant water. The intertidal DEM (Digital Elevation Model) was generated by echo-sounder for analyzing the relationship between IKONOS image and sedimentary environments including topography. The boundary of the optical reflectance between mud-mixed facies and sand facies was distinct, and discrimination of the associated sandbar feature was also possible. The mud-mixed facies coupled with intricate tidal channels is confined to the relatively hi호 topography of Hwangdo tidal flat. The boundary between mud and mixed flat was indistinct in IKONOS optical reflectance but it would have a difference in the area ratio of surface remnant water. The dark area in the image represented the well developed sand facies having a lot of surface remnant water due to the relatively low surface topography. The overall accuracy of characterizing the surface sediment facies by maximum likelihood classification method was 86.2 %. These results demonstrate that high spatial resolution satellite imagery such as IKONOS coupled with knowledge of grain size, surface remnant water and tidal channel network can be effectively used to characterize the surface sedimentary facies (mud, mixed and sand) network of the tidal flat environments.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.223-233
• /
• 2011

The aims of this study is about distribution characteristics of tidal coastal landforms, and that changing process in the Hampyeung Bay, which has a semi-enclosed bay like basin shape without inflow of stream, the mouth of open sea is narrow and forms with wide ends toward inland sea. The source of deposits are moved materials by tidal currents and from coastal slopes. Main landform elements of study area consist of tidal flat, tidal channels, intertidal sand bar, sea cliffs, and sea terrace. Tidal flats is classified with mud flat and mixed flat by grain size composition. Mud flats have developed at the shoreline area that tidal flat is closed to the continuity of gentle slope, and mixed flat developed at the foot of the sea cliffs and sea terraces. Quaternary deposits were identified in the coastal materials sedimented by the sea-level change. According to the analysis of grain size composition during last ten years, sands and silt has increased 2% and 6% respectively, clay has been decreased by 9%. The concaved tidal flats are colonized by salt plants. Areal changes of salt plants expanded near four times from 2.4km² at the year 2001 to 9.3km² at the year 2009. During the same periods, mean grain size became coarser from 6.5φ to 4.5φ at the salt plants area.

• Journal of Wetlands Research
• /
• v.6 no.1
• /
• pp.167-178
• /
• 2004

The southern tidal flat of Kanghwa Island is one of the biggest flats on the west coast of Korea. Tide is typically a semidiurnal with maximum range of about 10m. The tidal flat receives large amount of sediments from Han River system. Surface sediments for sedimentary analyses were sampled at 83 stations in the study area in August 2003. The surface sediments consisted of five sedimentary facies. Generally, sandy mud sediments dominated in the southern tidal flat of Kanghwa Island, whereas sand sediments dominated in channel and subtidal zones of the western part of Kanghwa Island. The area of sandy mud sediment extended to eastward tidal flat compared to sedimentary facies in August 1997. Sedimentary facies analysis of three core sediments from the tidal flat to the south of the Kangwha Island revealed three sedimentary facies: trough-cross-bedded sand, laminated silt, and bioturbated silt. Distribution of the facies in the cores suggested that sedimentation rates has been generally high in the margin of main tidal channel, especially in the east of the Donggeum Island. Twelve-and-half-hour anchoring survey was carried out for measurements of hydrodynamic parameters at Yeomha channel near Choji Bridge(K1) and channel near Donggeum Island(K2) in June 2003. Residual flows indicated strong ebb-dominated tidal currents. Depth-integrated net suspended sediment loads for one tidal cycle were seaward movement with 309,217.9kg/m and 128,123.1kg/m at station K1 and K2, respectively. The higher value of net suspended sediment loads at station K1 suggested that lots of suspended sediments from Han River deposited in the eastern part of tidal flat.

• Journal of Surface Science and Engineering
• /
• v.46 no.3
• /
• pp.111-115
• /
• 2013

To study the encapsulation method for large-area organic light emitting devices (OLEDs), OLED of ITO / 2-TNATA / NPB / $Alq_3$:Rubrene / $Alq_3$ / LiF / Al structure was fabricated, which on $Alq_3$/LiF/Al as protective layer of OLED was deposited to protect the damage of OLED, and subsequently it was encapsulated using attaching film and flat glass. The current density and luminance of encapsulated OLED using attaching film and flat glass has similar characteristics compared with non-encapsulated OLED when thickness of Al as a protective layer was 1200 nm, otherwise power efficiency of encapsulated OLED was better than non-encapsulated OLED. Encapsulation process using attaching film and flat glass did not have any effects on the emission spectrum and the Commission International de L'Eclairage (CIE) coordinate. The lifetime of encapsulated OLED using attaching film and flat glass was 287 hours in 1200 nm Al thickness, which was increased according to thickness of Al protective layer, and was improved 54% compared with 186 hours in same Al thickness, lifetime of encapsulated OLED using epoxy and flat glass. As a result, it showed the improved efficiency and the long lifetime, because the encapsulation method using attaching film and flat glass could minimize the impact on OLED caused through UV hardening process in case of glass encapsulation using epoxy.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.53-67
• /
• 2005

Cheonsu bay, which is typically a semi-closed type, is characterized by various environments such as channels, sand bars, small islands and tidal flats. The construction of Seosan A and B sea dikes from 1983 to 1985 might continuously change sedimentary environments in the northern part of the bay. In order to investigate sedimentary environment, surface and core sediments were sampled at the Hwangdo tidal flat and adjacent sea in June and October 2003. The surface sediments consisted of five sedimentary facies. Generally, the surface sediments in October were changed coarser on the tidal flat and little changed in the subtidal area compared to those in June 2003. Sedimentary facies analysis of three core sediments suggested that wave and tidal current were relatively strong in the tidal flat near Hwangdo, whereas the energy was relatively low in the tidal flat near channel. Sediment accumulation rates in the Hwangdo tidal flat during 11 months indicated that sediments deposited in the central part, whereas eroded in eastern and western sides of the tidal flat. These caused that sea dike changed tidal current patterns and sediment supplies.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.98-105
• /
• 2021

Understanding the migration patterns and habitats of juvenile birds during the post-fledging stage is very important for conservation and management of individuals. The Chinese Egret is an internationally protected species. During the wintering season, they inhabit South-East Asia, such as the Philippines, Malaysia, and Taiwan, and breed in China, Russia, and uninhabited islands on the west coast of Korea. IIn this study, we attached a GPS telemetry tracking device to six juvenile Chinese Egrets breeding on Chilsan Archipelago in 2018 and 2019 to identify habitats by analyzing the home range during the post-fledging stage in the summer season. The individual CE1801 moved north and then returned to the Yeonggwang Baeksu tidal flat area, and CE1802 and CE1803 migrated north and inhabited Taean-gun. In 2019, CE1901 showed a similar pattern to CE1801, and CE1902 migrated southward to the Wando-gun area, while CE1903 moved south to the Sinan-gun area then returned to the Yeonggwang Baeksu tidal flat area, showing KDE 50%. The study results confirmed that the Chinese Egret moved broadly around the flat tidal area on the west coast to find a stable habitat during the post-fledging stage. Efforts to protect the habitat, such as limiting the development of this area and restricting human access, are necessary.