• 한국주거학회논문집
• /
• 제14권5호
• /
• pp.11-17
• /
• 2003

This study is aimed at analyzing on the sunshine according to the blocks direction by location type of apartment complex in Busan, to propose a planning on the decision of blocks direction and the improvement of architectural law in sunshine environment. The results of this study were as follows; On the basis of winter solstice in "□ block type", the average of ratio of shadow area in flat site is 51 % in apartment with a southern exposure, 39% in apartment with a south-eastern exposure. The average of ratio of shadow area in the descended site toward the north is 49% in apartment with a southern exposure, 34% in apartment with a south-eastern exposure. The average of ratio of shadow area in the descended site toward the south is 66% in apartment with a southern exposure, 53% in apartment with a south-eastern exposure.

• Ocean and Polar Research
• /
• 제28권3호
• /
• pp.353-360
• /
• 2006

A 33-km long sea dyke is being constructed in the Saemangeum area mid-west of Korea to reclaim a surface area of 40,100 ha which includes well-developed tidal flat and two river estuaries. The northern part of the dyke was closed on 10 June 2003, while the southern part was recently closed on 21 April 2006 by plugging two opening gaps of 2.7 km in length. In this study, firstly we review the outlines of key national projects which described marine environments in the Saemangeum area and secondly we present a summary of remarkable changes in marine environments after the closure of the northern dyke, based on marine environmental data collected during 2002-2005. Details in each discipline of the marine environments are presented both in other papers of this special volume and in a series of annual reports of the Ministry of Maritime Affairs and fisheries.

• KSTLE International Journal
• /
• 제4권1호
• /
• pp.31-36
• /
• 2003

Sliding and impact/sliding wear test in room temperature air and water were performed to evaluate the effect of spring shapes on the wear mechanism of a fuel rod. The main focus was to quantitatively compare the wear behavior of a fuel rod with different support springs (i.e. two concaves, a convex and a flat shape) using a ratio of wear volume to worn area (De)-The results indicated that the wear volumes at each spring condition were varied with the change of test environment and loading type. However, the relationship between the wear volume and worn area was determined by only spring shape even though the wear tests were carried out at different test conditions. From the above results, the optimized spring shape which has more wear-resistant could be determined using the analysis results of the relation between the variation of De and worn surface observations in each test condition.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.11-17
• /
• 2000

The electric contact resistance between ball and disk was measured to estimate the real area of contact under dry and lubrication conditions. The results from the measured constriction resistance using the hypothesis of a single circular contact was compared with those of Hertzian contact theory and hardness. The resistance correlated well with the asperity contact area and friction when the ball slides on the flat disk spreaded with lubricant film. Therefore, the constriction resistance method was useful to identify the lubrication regimes with respect to various loads and speeds. The results of this work will aid in better prediction of lubrication regimes with respect to the operating conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.115-118
• /
• 2005

A workpiece with a large surface area is likely to be uneven due to form error and waviness. These geometric disturbances can cause inaccurate micro shapes to be formed when micro features are micro-grooved into the surface and cause the resulting workpiece to fail to function as desired. Thus, real-time measurement and compensation is required to guarantee the form accuracy of micro features while machining a workpiece with a large surface area. In this study, a method is suggested for real-time measurement of geometric error for the micro grooving of a large flat surface using a laser displacement sensor. The measurements are demonstrated for the workpieces with large surface areas and the experimental results show that the waviness and form error are well detected.

• 대한전자공학회논문지SD
• /
• 제39권2호
• /
• pp.1-6
• /
• 2002

본 논문에서는 UXGA(Ultra extended Graphics Array)급 TFT LCD Driver를 지원하는 Analog Flat Panel Interface(AFPI)용 Module을 설계하였다. 제안하는 AFPI는 8-b ADC, 자동이득 제어기(AGC), 저잡음 PLL로 구성 되어있다. 8-b ADC는 고속동작과 저전력 기능을 위한 새로운 구조로서 FR(Folding Rate)이 8, NFB(Number of Folding Block)이 2, Interpolation rate이 16이며, 분산 Track and Hold구조를 사용하여 Sampling시 입력주파수를 낮추어 높은 SNDR을 얻을 수 있었다. 또한 Gain과 Clamp을 통제 할 수 있는 Programmable한 AGC, 낮은 Jitter Noise PLL을 설계하였다. 제안된 Module은 0.2㎛, 1-Poly 5-Metal, n-well CMOS공정을 사용하여 제작되었으며, 유효 칩 면적은 3.6mm × 3.2mm이고 602㎽의 전력소모를 나타내었다. 입력 주파수는 10㎒, 샘플링 주파수 200㎒에서의 INL과 DNL은 ±1LSB 이내로 측정되었으며, SNDR은 43㏈로 측정되었다.

• 한국통신학회논문지
• /
• 제17권3호
• /
• pp.213-224
• /
• 1992

저층 라플라시안 피라미드 영상의 부호화 방법을 제안하였다. 이 방법은 근본적으로 영역 분리와 벡터양지화 방법을 이용하였다. 저층 라플라시안 영상은 고층에 비하여 분산이 매우 작지만 공간 면적이 넓어 압축율에 크게 영향을 미친다. 바로 이 점에서 저층 영상을 분산값의 크기로 평탄/윤곽 영역으로 분리하여 평탄 영역은 평균값으로, 윤곽 영역은 벡터 양자화 방법으로 부호화하였다. 이 방법은 윤곽 영역만을 벡터 양자화함으로써 보다 효율적으로 윤곽 정보를 나타낼 수 있어서 평탄 영역에 의한 약간의 PSNR감소를 수반하지만 높은 압축율을 얻을수 있는 것이 장점이다. 컴퓨터 시뮬레이션 결과로 기존의 벡터 양자화 방법보다 압축율면이나 처리 시간면에서 효율적이라는 것을 알 수 있었다.

• 한국해안해양공학회지
• /
• 제17권1호
• /
• pp.47-54
• /
• 2005

목포해역과 같이 수심이 복잡하고 조간대가 광범위하게 발달되어 있는 곳의 수심자료를 용이하게 입력하고 수치모형 운용을 경제적으로 수행할 수 있는 기법을 개발하였다. 이를 청계만의 조간대 모의에 적용하여 조간대와 관련된 목포해역의 동수역학적 해석을 수행하였다. 하구언과 방조제 건설에 따라 목포항 인근을 비롯해 청계만 수역까지 조석확폭현상이 발생한 바 있는데, 이로 인해 청계만의 조간대 규모가 증대되었으며 낙조우세가 더욱 심화되었다. 청계만의 심화된 낙조우세현상은 목포항 쪽의 해수유통량 증가에 기인하였는데 이러한 영향성 증대로 인해 목포항 부근의 낙조우세 역시 심화된 결과를 초래하였다.

• 복식
• /
• 제63권7호
• /
• pp.79-93
• /
• 2013

In the Korean literature, records of systematic gold thread manufacturing such as gold foil(金 箔匠), gold foil bonded with fabrics(付金匠), gold foil bonded with paper materials(金箋紙匠), refining gold(鍊金匠), cutting gold(裁金匠), and making gold thread(絲金匠) can be easily found. We can infer from these literatures that the Korean people used to make gold threads. However, is not existent the gold thread making technique. Thus, a research was done using 67 pieces of gold thread artifacts used in textiles craft of Korea, China and Japan. The purpose of this research was to identify the characteristics of the Korean gold thread by studying the artifacts' form classification, gold foil, glue and the base. First, gold thread is divided into flat gold thread and wrapped gold thread. Wrapped gold thread was made in more various methods such as with a paper on the flat gold thread, metal thread and wrapped gold thread with gold foil on top. Compared to the flat gold thread, wrapped gold thread uses a thread that has a thinner and wider. Through this analysis, even making of the base of the gold threads was different according to the type. Secondly, we looked into the characteristics of materials according to form structure of the gold thread. After analysis of experiment results, we could know that to attach Korean gold thread, glue and the mixture of materials such as Red soil(朱土) was also added. The kinds of the base of gold threads were identified as paper, leather and intestines. Among those materials, for paper, Korea's Dakji, China's Sangpiji(桑皮紙) and Jukji(竹紙) and Japan's Anpiji(雁皮紙) seemed to have all been used, so because of the difference among countries, we can prove that Korea has also produced gold thread. By looking at the research, the base of gold threads and making features hugely vary according to the area.

• 대한후두음성언어의학회지
• /
• 제23권1호
• /
• pp.52-55
• /
• 2012

Background and Objectives : Based on histological findings, intracordal cysts are divided in two subtypes : retention cysts and epidermoid cysts. They are typically located in the superficial layer of the lamina propria and appeared as opaque ovoid buldging masses underlying the epithelium. They are characterized by unilateral diminished mucosal wave on stroboscopy. In this article, we report some cases of patients with an oval shaped-yellowish flat cyst. Materials and Method : At the clinic of the department of otorhinolaryngology in Gangnam Severance Hospital, with 3 female complained of hoarseness as subjects, using the stroboscopy we checked preoperative and postoperative vocal cord and operative findings. Surgery was performed under general anesthesia by the senior authors. All patients noted subjectively that their performing voice was improved. Results : During surgery, an oval shaped-yellowish flat cystic lesion was distinguished from normal epithelium. On palpation of this area with microforceps and cottons, the yellowish discharge was noted to move out from the opening of the cyst. In one case, the cyst was ruptured but remove the capsule completely. In other cases, sulcus was noted at the oppsite site. Conclusion : Because of the opening, the cyst was not easy to dissect and remove completely. After the debris was move out, fibrosis around the opening and invaginated epithelium extending into the deeper layers to the fold. The cyst was must removed carefully and completely for improvement of voice quality before evolving into a sulcus vocalis.