• 한국지구과학회지
• /
• 제28권3호
• /
• pp.357-366
• /
• 2007

곰소만 조간대 퇴적물의 장기적 변화를 조사하기 위하여 1991년과 2006년에 채취된 표층퇴적물 시료를 분석하고, 그 결과를 비교하였다. 만 입구 조간대에서는 실트와 점토의 함량이 감소하고 모래의 함량이 증가하였다. 만의 중부와 상부 조간대에서는 모래와 점토의 함량이 감소하고 실트의 함량이 증가하였다. 특히 점토의 함량은 주변의 다른 반폐쇄된 조간대에 비해 상대적으로 매우 낮은 함량 분포를 보였으며, 1991년에 비해서도 뚜렷하게 감소하는 경향을 보였다. 퇴적물 구성성분의 뚜렷한 함량 변화는 퇴적상의 변화를 초래하였다. 이러한 변화는 매립 및 호안건설에 의한 해안선의 변형과 간조선 부근에 빽빽하게 설치된 양식장의 구조물, 그리고 곰소만 북쪽의 새만금 방조제 건설 등에 의한 수리에너지 조건의 변화에 기인한 것으로 해석된다.

• 한국환경과학회지
• /
• 제10권5호
• /
• pp.315-321
• /
• 2001

This study was conducted to estimate the decomposition capacity for organic matter by microbe of tidal flat sediments (Hajae, Dongjin and Mankyung). The decomposition rate constants (K') have been determined by Thomas slope method and compared with the values of each tidal flats. The decomposition rates of organic matter by microbe were initially very slow, but at the end of 12 hours, very sharply increased. The values of decomposition rate constant for Dongjin, Mankyung and Hajae tidal flat sediment were 1.364$day^{-1}$/, 1.080d$day^{-1}$ and 0.735$day^{-1}$, respectively. The decomposition rate constant of Dongjin tidal flat sediment which affected by livestock wastewater was higher than others. The decomposition quantity (mg/g/day) of organic matter by microbe of tidal flat sediments was 0.4mg/g/day for Dongjin, 0.36mg/g/day for Mankyung and 0.36mg/g/day for Hajae. The average of decomposition quantity was 0.37mg/g/day. To calculate purification capacity (kg/ha) of organic matter by microbe, we applied to two assumption ; 1) biological action by microbe is occur within 0.1cm under surface 2) specific gravity of sediment are 2.5g/$\textrm{cm}^2$. The purification capacity of organic matter by microbe of tidal flat sediment was calculated to 9.25kg/ha. The relationships between decomposition rate constant (K') and ignition loss (I. L), chemical oxygen demand by sediment (CO $D_{sed}$), total carbon(TC), silt and clay as index of organic matter were a high positive($R^2$=0.97~1.00).

• 한국해양학회지
• /
• 제20권1호
• /
• pp.43-49
• /
• 1985

서해안 장구만에 발달하는 조간대에서 24개의 표층시료 및 18개의 코아를 채 취하여 퇴적물의 조직 및 퇴적구조를 조사하였다. 이 조간대 지역은 대체로 silt flat, sandy-silt flat, silty-sand flat 으로 구분되며 해안선에서 바다쪽으로 갈수 록 입도가 조립화되는 경향을 보여준다. 코아의 X-ray촬영에 의해 나타나는 퇴적구 조는 bioturbation, current ripple laminae, parallel laminae등이며 지역에 따라 현저 한 차이를 보이고 있다. Bioturbation구조는 1차적으로 형성된 물리적 퇴적구조를 파괴하고 있으며, 만조선 쪽으로 갈수록 그 정도가 증가하고 있다. current ripple laminae 는 bioturbation정도가 비교적 적은 silty-sand, sandy-silt지역에 잘 나타나 며, 몇번의 창조류와 낙조류에 의해 형성된 미세한 사층리를 잘 보여주고 있다. 내 만쪽에 나타나는 parallel laminae는 silt/clay호층의 두께 1mm이하의 층리로이루어 져 있는 반면, 외만쪽에 나타나는 parallel laminae는 sand/silt/호층의 두께 1~5mm 의 층리로 구성되어 있는 것이 특징이다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2007년도 추계학술 발표회
• /
• pp.193-198
• /
• 2007

KIER has been developing the anode supported flat tubular SOFC stack for the intermediate temperature $(700{\sim}800^{\circ}C)$ operation. for this purpose, we have first fabricated anode supported flat tubular cells by the optimization between the current collecting method and the induction brazing process. After that we designed the compact fuel & air manifold by adopting the simulation technique to uniformly supply fuel & air gas and the unique seal & insulation method to make the more compact stack. For making stack, the prepared anode-supported flat tubular cells with effective electrode area of $90cm^2$ of connected in series with 12 modules, in which one module consists of two cells connected in parallel. The performance of stack in 3 % humidified $H_2$ and air at $800^{\circ}C$ shows maximum power of 507 W. Through these experiments, we obtained basic & advanced technology of the anode-supported flat tubular cell and established the proprietary concept of the anode-supported flat tubular SOFC stack in KIER.

• The Plant Pathology Journal
• /
• 제28권1호
• /
• pp.20-31
• /
• 2012

Endophytic bacterial communities of tidal flat plants antagonistic to oomycete plant pathogens were studied by the isolation of 256 root colonizing endophytic bacteria from surface-disinfected root tissues of six plants ($Rosa$ $rugosa$, $Suaeda$ $maritima$, $Vitex$ $rotundifolia$, $Carex$ $scabrifolia$, $Glehnia$ $littoralis$ and $Elymus$ $mollis$) growing in a tidal flat area of Namhae Island, Korea. To understand the antagonistic potential, an $in$ $vitro$ antagonistic assay was performed to characterize and identify strains that were antagonistic to the oomycete plant pathogens $Phytophthora$ $capsici$ and $Pythium$ $ultimum$ from the total population. Nine percent of the total number of isolated bacteria exhibited in vitro inhibitory activity against target plant pathogenic oomycetes. Taxonomic and phylogenetic placement of the antagonistic bacteria was investigated by analysis of the 16S rRNA gene sequences. The sequence analysis classified the antagonistic strains into four major classes of the domain bacteria ($Firmicutes$, ${\alpha}-Proteobacteria$, ${\gamma}-Proteobacteria$ and $Actinomycetes$) and 10 different genera. Further production of secondary metabolites, hydrolytic enzymes and plant growth promoting traits were determined for the putative new species of antagonistic endophytic bacteria. These new strains could not be identified as known species of ${\alpha}-Proteobacteria$, and so may represent novel bacterial taxa. The unexpected high antagonistic bacterial diversity associated with the tidal flat plants may be indicative of their importance in tidal flat plants as a promising source of novel antimicrobial compounds and biocontrol agents.

• 한국수산과학회지
• /
• 제52권6호
• /
• pp.656-665
• /
• 2019

Environmental monitoring was conducted to identify the characteristics and patterns of sedimentary environments of tidal flats in 12 areas on the west coast of Korea. The habitat of the mud shrimp Upogebia major contained higher organic and mud contents compared to the habitat of the manila clam Ruditapes philippinarum. In particular, the mud content increased from 84.38% to 89.18% in the Seongam-4 area, where the mud shrimp and manila clam coexist, and the mean grain size exhibited a finer particle size, from 5.48 Φ to 5.80 Φ. In the mud shrimp habitat, the sediment mud content was > 60% and the mean grain size was > 5 Φ. Additionally, the mud shrimp only inhabited open coast tidal flat areas. The management of shellfish aquaculture farms by physical methods should be continued based on comparison of the sedimentary environments in the Boryeong and Seongam areas in response to the damage to the mud shrimp habitat.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.15-26
• /
• 2004

The calibration for systematic error in LiDAR is crucial for the accuracy of airborne laser scanning. The main error is the misalignment of platforms between INS(Inertial Navigation System) and Laser scanner For planimetrical calibration of LiDAR, the building is good feature which has great changes in height and continuous flat area in the top. The planimetry error(pitch, roll) is corrected by adjustment of height which is calculated from comparing ground control points(GCP) of building to laser scanning data. We can know scale correction of laser range by the comparison of LiDAR data and GCP is arranged at the end of scan angle where maximize the height error. The area for scale calibration have to be large flat and have almost same elevation. At 1000m for average flying height, The Accuracy of laser scanning data using LiDAR is within 110cm in height and ${\pm}$50cm in planmetry so we can use laser scanning data for generating 3D terrain surface, expecically digital surface model(DSM) which is difficult to measure by aerial photogrammetry in forest, coast, urban area of high buildings

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.142-147
• /
• 2014

Finite element analysis along with DOE scheme has been performed to obtain robust design of connecting rod assembly. An analysis was conducted with five loading steps. Fatigue analysis was done using commercial software FEMFAT and fatigue safety factors at the interested regions such as shank area of small end and big end were calculated. 27 design cases using 3 factors with 3 levels are constructed by design of experiment. Each case is simulated to find the most influential factors. Response for this study, maximum Von-Mises stress, has been used to determine main factors of connecting rod assembly. Among the 3 factors, compression load affected the response greatly. However, bolt assembly load and width of shank flat area showed a little influence to the response. Interaction effects among factors considered did not occur. Connecting rod assembly considered in this study showed its sensitivity to the noise factor such as compression load rather than design factor such as width of flat shank area.

• ETRI Journal
• /
• 제30권4호
• /
• pp.506-515
• /
• 2008

The H.264/AVC standard has adopted new coding tools such as intra-prediction, variable block size, motion estimation with quarter-pixel-accuracy, loop filter, and so on. The adoption of these tools enables an H.264/AVC-coded bitstream to have more information than was possible with previous standards. In this paper, we propose an effective spatial error concealment method with low complexity in H.264/AVC intra-frame. From information included in an H.264/AVC-coded bitstream, we use prediction modes of intra-blocks to recover a damaged block. This is because the prediction direction in each prediction mode is highly correlated to the edge direction. We first estimate the edge direction of a damaged block using the prediction modes of the intra-blocks adjacent to a damaged block and classify the area inside the damaged block into edge and flat areas. Our method then recovers pixel values in the edge area using edge-directed interpolation, and recovers pixel values in the flat area using weighted interpolation. Simulation results show that the proposed method yields better video quality than conventional approaches.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.150-155
• /
• 2006

Falling liquid plays a role in a wide variety of naturally occurring phenomena as well as in the operation of industrial process equipment where heat and mass transfer take place. In such cases, it is required that the falling film should spread widely on the surface forming thin liquid film to enlarge contact surface. An addition of surface active agent to a falling liquid film affects the flow characteristics of the falling film. In this study the heat transfer characteristics for a falling liquid film has been investigated by an addition of the surface active agents. The falling liquid film was formed on a vertical flat plate. As the mass flow rate of liquid falling film is increased, the wetted area is a little increased while the heat transfer rate as well as heat transfer coefficient is significantly increased. It is also found that both wetted area and heat transfer rate is substantially increased while heat transfer coefficient is a little increased with an increase in the surfactant concentration at a given mass flow rate.