• The Journal of the Korea Contents Association
• /
• v.5 no.2
• /
• pp.7-17
• /
• 2005

Flash contents for education can embody easily complex interactions with learner by splendid contents of various multimedia and animation. Moreover, they provide high class user interface and have advantages of inducing learner's interest and concentration. However, authoring flash content requires the skill to use the Flash tool, which is too difficult for professor to make the educational Flash contents. In this paper, we proposed the system that professors can make the Flash contents automatically by selecting something necessary and typing texts on the web. Also, the reusability and usability of the implemented system is analyzed in the viewpoint of professor by comparing with conventional method to reuse the Flash contents from various viewpoints.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.45-50
• /
• 2015

The flash point is one of the most important properties for characterizing the fire and explosion hazard of liquid solutions. In this study, a Tag open-cup apparatus was used to measure the flash points of two flammable binary mixtures, n-decane + n-octanol and acetic acid + n-butanol. The flash point temperature was estimated using the UNIFAC (Universal Functional Activity Coefficient) group contribution model and optimization method. The experimentally derived flash point was also compared with the predicted flash point. The two methods can estimate the flash point fairly well for the n-decane + n-octanol and acetic acid + n-butanol systems.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.205-210
• /
• 2007

This paper presents a CMOS TIQ flash A/D converter which operates very fast compared to other types of A/D converters due to its parallel architecture. The output resolution of designed A/D converter is 6-bit. In order to reduce the power consumption and chip area of conventional flash A/D converter, TIQ based flash A/D converter is proposed, which uses the advantage of the structure of CMOS transistors. The length and width of transistors of TIQ were determined with HSPICE simulation. To speed up the ultra-high speed flash A/D converter, the Fat Tree Encoder technique is used. The TIQ A/D converter was designed with full custom method. The chip's maximum power consumption was 38.45mW at 1.8V, and the operating speed of simulation was 2.7 GSPS.

• Transactions of Materials Processing
• /
• v.13 no.6 s.70
• /
• pp.503-508
• /
• 2004

Preform design techniques have been investigated to reduce die wear and forming load and to improve material flow, filling ratio, etc. In hot forging processes, a thin deformed part of a workpiece, known as a flash, is formed in the narrow gap between the upper and lower tools. Although designers make tools that generate a flash intentionally in order to improve flow properties, excessive flash increases die wear and forming load. Therefore, it is necessary to make a preform shape that can reduce the excessive flash without changing flow properties. In this paper, a new preform design technique is proposed to reduce the excessive flash in a metal forging process. After a finite element simulation of the process is carried out with an initial billet, the flow of material in the flash region is traced from the final shape to the initial billet. The region belonging to the flash is then easily found in the initial billet. The finite element simulation is then carried out again with the modified billet from which the selected region has been removed. In several iterations of this technique, the optimal preform shape that minimizes the amount of flash without changing the forgeability can be obtained.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.251-255
• /
• 2008

In most file systems, if a file is deleted, only the metadata of the file is deleted or modified and the file's data is still stored on the physical media. Some users require that deleted files no longer be accessible. This requirement is more important in embedded systems that employ flash memory as a storage medium. In this paper, we propose a secure deletion method for NAND flash file system and apply the method to YAFFS. Our method uses encryption to delete files and forces all keys of a specific file to be stored in the same block. Therefore, only one erase operation is required to securely delete a file. Our simulation results show that the amortized number of block erases is smaller than the simple encryption method. Even though we apply our method only to the YAFFS, our method can be easily applied to other NAND flash file systems.

• KIISE Transactions on Computing Practices
• /
• v.20 no.10
• /
• pp.525-533
• /
• 2014

SCST(The generic SCSI target subsystem for Linux) enables developers to make SCSI target storage and supports various SCSI network protocol such as iSCSI, FC, SRP. In this paper, we propose storage virtualization method using SCST and virtualize all flash array as high performance storage through 4Gb Fiber Channel, 10Gb Ethernet and 40Gb Infiniband and evaluate their performance, respectively. Experimental result shows that 40Gb infiniband network appliance have better performance than others. In case of sequential/random read, 40Gb infiniband network appliance shows 78% and 79% of local all flash array performance attached to SCSI target system. In case of sequential/random write, it shows 83% and 88% of local flash array performance attached to SCSI target system.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.767-774
• /
• 2010

Due to advantages of NAND flash memory such as non-volatility, low access latency, low energy consumption, light weight, small size and shock resistance, it has become a better alternative over traditional magnetic disk drives, and has been widely used. Traditional DBMSs including mobile DBMSs may run on flash memory without any modification by using Flash Translation Layer (FTL), which emulates a random access block device to hide the characteristics of flash memory such as "erase-before-update". However, most existing FTLs are optimized for file systems, not for DBMSs, and traditional DBMSs are not aware of them. Also, traditional DBMSs do not consider the characteristics of flash memory. In this paper, we propose a flash-conscious storage system for DBMSs that utilizes flash memory as a main storage medium, and carefully put the characteristics of flash memory into considerations. The proposed flash-conscious storage system exploits log records to avoid costly update operations. It is shown that the proposed storage system outperforms the state.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.103-108
• /
• 2005

In this study, to develop a flash-less mold for forming of shoe-outsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, offset method and mass distribution method are used in the preform design. The vertical mold structure pressing the preform was introduced to produce a flash-less shoe-sole. To measure the contact status of parting surface of mold, the pressure film has been used. The guide-gutter system and the continuous pressing mold have been developed for the discharge of extra-materials and re-pressing. By the investigation, flash of shoe-outsole was considerably reduced.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.6
• /
• pp.558-565
• /
• 2012

Schedule management of construction work is critical to completing construction projects within a given period of time. Many efforts have been made and multiple tools have been developed to support the management of construction projects using smart devices such as smartphones and tablet PCs. This study proposed a method for managing construction schedules via a smart device using Flash. The interactive and graphic properties of Flash enable the development of an app that can allow a field manager to manage schedules easily and efficiently. A prototype was implemented using Adobe Flex Builder, and a sample network was applied in a smartphone. It is convenient for a construction manager to manage construction schedules using the tool because Flash controls graphic components easily. In further studies, network diagrams such as CPM (Critical Path Method) should be developed and applied to the app.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.35-39
• /
• 2013

The flash point is an important indicator of the flammability of a chemical. In this study, the flash points for the n-propanol+n-butanol and n-propanol+acetic acid systems were measured by Tag open-cup apparatus. The experimental data were compared with the values calculated by the Raoult's law and optimization method based on van Laar and UNIQUAC equations. The calculated values by optimization method were found to be better than those based on the Raoult's law.