• Management Science and Financial Engineering
• /
• v.10 no.2
• /
• pp.73-87
• /
• 2004

Automotive and aircraft assembly process rely on fixtures to support and coordinate parts and subassemblies. Fixture layout in multi-station panel assemblies has a direct dimensional effect on final products and thus presents a quality problem. This paper describes a methodology for fixture layout design in multi -station assembly processes. An optimal fixture layout improves the robustness of a fixture system against environmental noises, reduces product variability, and eventually leads to manufacturing cost reduction. One of the difficulties raised by multi-station fixture layout design is the overwhelmingly large number of design alternatives. This makes it difficult to find a global optimality and, if an inefficient algorithm is used, may require prohibitive computing time. In this paper, simulated annealing is adopted and appropriate parameters are selected to find good fixture layouts. A four-station assembly process for a sport utility vehicle (SUV) side frame is used throughout the paper to illustrate the efficiency and effectiveness of this methodology.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.4
• /
• pp.94-101
• /
• 2005

This paper presents a data-mining aided heuristic algorithm development. The developed algorithm includes three steps. The steps are a uniform selection, development of feature functions and clustering, and a decision tree making. The developed algorithm is employed in designing an optimal multi-station fixture layout. The objective is to minimize the sensitivity function subject to geometric constraints. Its benefit is presented by a comparison with currently available optimization methods.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.369-372
• /
• 2006

Optimal engineering design is challenging because nonlinear objective functions need to be evaluated in a high-dimensional space. This paper presents a data-mining aided optimal design method. The method is employed in designing an optimal multi-station fixture layout. Its benefit is demonstrated by a comparison with currently available optimization methods.

• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.22-29
• /
• 2015

The purpose of this study is to investigate the details of the overall interior design of the department store supermarket retail space, interior design and development, seeks to help change. In this study, a range of research the department store supermarket located in the major department store. Since 2012, new construction or renewal has been done in a department store, was investigated by selecting a total of five locations of two places in the premium supermarket. Conclusions are as followings ; First, In-store merchandising strategies, store configuration strategy, product mix strategies, and the layout plan considering the advanced strategies. Secondly, the interior guidelines are, (1)VP should be planned as an expression of a company or brand management strategies to visualize a concept image of product planning stages of merchandising to entering the store to induce curiosity to customers. (2)PP is by planning purposes, the use of lighting, directing structure, color harmony, by utilizing such as props and small parts must be able to attract attention. (3)IP is the customer to organize display, depending on the type of the display items to facilitate fraud, and the fixture plan in association with it, the customer selects a product must induced to purchase.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.295-299
• /
• 2004

A new design technique of fabricating 40 GHz up-converter modules for digital microwave radios has been developed. The design of the up-converter module is based on unit circuit blocks, which are to be characterized using a special test fixture. The complete module design may be as simple as a cascade layout of these unit circuit blocks. Also, the 40 GHz up-converter module employs a new microstrip-to-waveguide transition and a tapped edge-coupled filter, which are less sensitive to fabrication tolerances.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.3
• /
• pp.29-37
• /
• 2017

Purpose : Due to the shortage of the room for the disabled, it may be difficult to use the accommodation for the disabled (especially wheelchair users). The purpose of this paper is to propose a universal design(UD) application for all rooms to solve the problems caused by the shortage and the decrease of the usage rate of the rooms for the disabled. Methods : Classify and analyze the type of room and bathroom according to the survey. The space of the room is classified into six types mainly based on the relation and location among the entrance, the bathroom, and the bedroom. Also, the bathroom is classified into 20 types considering the positional relationship with the entrance and between sanitary fixture. By using these types, FGI survey will be conducted and the application of UD will be reviewed and presented. Results : We analyzed by using the types of the room and the bathroom. One of majority type in the actual research and two of UD applicable types from FGI, are shown UD application. In addition, the bathroom were analyzed about four types from FGI. The room were shown about the activity space and the furniture layout for UD. The bathroom were shown about the space for the entrance, the internal activitiy space and the arrangement of the sanitary fixture. Implications : By comparing and analyzing through type classification, it was found that universal design can be applied to all rooms. Therefore, it is expected that the UD will be activated in all rooms of the accommodation.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.21-29
• /
• 2001

The general topology optimization can be considered as optimal material distribution. Such an approach can be unstable, unless composite materials are introduced. In this research, a nodal volume fraction method is used to obtain the optimum topology of continuum structures. This method is conducted from a composite material model composed of isotropic matter and spherical void. Because the appearance of the chessboard patterns makes the interpretation of the optimal material layout very difficult, this method contains a chessboard prevention strategy. In this research, several topology optimization problems are presented to demonstrate the validity of the present method and the recursive quadratic programming algorithm is used to solve the topology optimization problems.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.3
• /
• pp.47-56
• /
• 2002

The office is an excellent candidate for implementing daylighting techniques because of the relatively high electric lighting power densities and long daytime use pattern. The quantity of light available for a space can be translated in term of the amount of energy savings through a process of a building energy simulation. To get significant energy savings in general illumination, the electric lighting system must be incorporated with a daylight - activated dimmer control. A prototype configuration of an office interior has been established and the integration between the building envelope and lighting and HVAC systems is evaluated based on computer modeling of a lighting control facility. First of all, an energy-efficient luminaire system is designed for both a totally open-plan office interior and a partitioned office. A lighting design and analysis program, Lumen-Micro 2000 predicts the optimal layout of a conventional fluorescent lighting fixture to meet the designed lighting level and calculates unit power density, which translates the demanded amount of electric lighting energy. A dimming control system integrated with the contribution of daylighting has been applied to the operating of the artificial lighting. Annual cooling load due to lighting and the projecting saving amount of cooling load due to daylighting under overcast diffuse sky are evaluated by a computer software, ENER-Win. In brief, the results from building energy simulation with measured daylight illumination levels and the performance of lighting control system indicate that daylighting can save over 70 percent of the required energy for general illumination in the perimeter zones through the year. A 25 % of electric energy for cooling may be saved by dimming and turning off the luminaires in the perimeter zones.